An efficient telemetry system for restoring sight

PhD ThesisThe human nervous system can be damaged as a result of disease or trauma, causing conditions such as Parkinson’s disease. Most people try pharmaceuticals as a primary method of treatment. However, drugs cannot restore some cases, such as visual disorder. Alternatively, this impairment can be treated with electronic neural prostheses. A retinal prosthesis is an example of that for restoring sight, but it is not efficient and only people with retinal pigmentosa benefit from it. In such treatments, stimulation of the nervous system can be achieved by electrical or optical means. In the latter case, the nerves need to be rendered light sensitive via genetic means (optogenetics). High radiance photonic devices are then required to deliver light to the target tissue. Such optical approaches hold the potential to be more effective while causing less harm to the brain tissue. As these devices are implanted in tissue, wireless means need to be used to communicate with them. For this, IEEE 802.15.6 or Bluetooth protocols at 2.4GHz are potentially compatible with most advanced electronic devices, and are also safe and secure. Also, wireless power delivery can operate the implanted device. In this thesis, a fully wireless and efficient visual cortical stimulator was designed to restore the sight of the blind. This system is likely to address 40% of the causes of blindness. In general, the system can be divided into two parts, hardware and software. Hardware parts include a wireless power transfer design, the communication device, power management, a processor and the control unit, and the 3D design for assembly. The software part contains the image simplification, image compression, data encoding, pulse modulation, and the control system. Real-time video streaming is processed and sent over Bluetooth, and data are received by the LPC4330 six layer implanted board. After retrieving the compressed data, the processed data are again sent to the implanted electrode/optrode to stimulate the brain’s nerve cells

Design and Implementation of a Passive Neurostimulator with Wireless Resonance-Coupled Power Delivery and Demonstration on Frog Sciatic Nerve and Gastrocnemius Muscle

The thesis presented has four goals: to perform a comprehensive literature review on current neurostimulator technology; to outline the current issues with the state-of-the-art; to provide a neurostimulator design that solves these issues, and to characterize the design and demonstrate its neurostimulation features. The literature review describes the physiology of a neuron, and then proceeds to outline neural interfaces and neurostimulators. The neurostimulator design process is then outlined and current requirements in the field are described. The novel neurostimulator circuit that implements a solution that has wireless capability, passive control, and small size is outlined and characterized. The circuit is demonstrated to operate wirelessly with a resonance-coupled multi-channel implementation, and is shown powering LEDs. The circuit was then fabricated in a miniature implementation which utilized a 10 x 20 x 3 mm&179 antenna, and occupied a volume approximating 1 cm&179. This miniature circuit is used to stimulate frog sciatic nerve and gastrocnemius muscle in vitro. These demonstrations and characterization show the device is capable of neurostimulation, can operate wirelessly, is controlled passively, and can be implemented in a small size, thus solving the aforementioned neurostimulator requirements. Further work in this area is focused on developing an extensive characterization of the device and the wireless power delivery system, optimizing the circuit design, and performing in vivo experiments with restoration of motor control in injured animals. This device shows promise to provide a comprehensive solution to many application-specific problems in neurostimulation, and be a modular addition to larger neural interface systems

Feasibility Assessment of an Optically Powered Digital Retinal Prosthesis Architecture for Retinal Ganglion Cell Stimulation

Clinical trials previously demonstrated the notable capacity to elicit visual percepts in blind patients affected with retinal diseases by electrically stimulating the remaining neurons on the retina. However, these implants restored very limited visual acuity and required transcutaneous cables traversing the eyeball, leading to reduced reliability and complex surgery with high postoperative infection risks. To overcome the limitations imposed by cables, a retinal implant architecture in which near-infrared illumination carries both power and data through the pupil to a digital stimulation controller is presented. A high efficiency multi-junction photovoltaic cell transduces the optical power to a CMOS stimulator capable of delivering flexible interleaved sequential stimulation through a diamond microelectrode array. To demonstrate the capacity to elicit a neural response with this approach while complying with the optical irradiance limit at the pupil, fluorescence imaging with a calcium indicator is used on a degenerate rat retina. The power delivered by the laser at the permissible irradiance of 4 mW/mm2 at 850 nm is shown to be sufficient to both power the stimulator ASIC and elicit a response in retinal ganglion cells (RGCs), with the ability to generate of up to 35 000 pulses per second at the average stimulation threshold. This confirms the feasibility of generating a response in RGCs with an infrared-powered digital architecture capable of delivering complex sequential stimulation patterns at high repetition rates, albeit with some limitations.Comment: 11 pages, 13 figure

Temporal structure in spiking patterns of ganglion cells defines perceptual thresholds in rodents with subretinal prosthesis.

Subretinal prostheses are designed to restore sight in patients blinded by retinal degeneration using electrical stimulation of the inner retinal neurons. To relate retinal output to perception, we studied behavioral thresholds in blind rats with photovoltaic subretinal prostheses stimulated by full-field pulsed illumination at 20 Hz, and measured retinal ganglion cell (RGC) responses to similar stimuli ex-vivo. Behaviorally, rats exhibited startling response to changes in brightness, with an average contrast threshold of 12%, which could not be explained by changes in the average RGC spiking rate. However, RGCs exhibited millisecond-scale variations in spike timing, even when the average rate did not change significantly. At 12% temporal contrast, changes in firing patterns of prosthetic response were as significant as with 2.3% contrast steps in visible light stimulation of healthy retinas. This suggests that millisecond-scale changes in spiking patterns define perceptual thresholds of prosthetic vision. Response to the last pulse in the stimulation burst lasted longer than the steady-state response during the burst. This may be interpreted as an excitatory OFF response to prosthetic stimulation, and can explain behavioral response to decrease in illumination. Contrast enhancement of images prior to delivery to subretinal prosthesis can partially compensate for reduced contrast sensitivity of prosthetic vision

The Argus II Retinal Prosthesis System

The field of retinal prosthetics has seen significant advances in the past 3 decades. Encouraging results from different groups have shown coarse objective functional improvement, using a range of technological and surgical approaches. The Argus II retinal prosthesis system was the first of its kind to receive regulatory approval for commercial use in Europe and the USA. The device is designed to replicate the function of photoreceptors in converting visual information into electrical neural signals in patients with profound visual loss secondary to degenerative retinal disease. Results from a phase II study of 30 patients have demonstrated improved performance in basic tests of visual function, object recognition, letter reading, prehension, orientation and mobility tasks. It is now the most widely implanted retinal prosthetic device worldwide. This chapter provides an overview of the requirements of a retinal prosthetic system, the results from the Argus II device to date, and an insight into some of the challenges and future directions of visually restorative therapies

PRIMA subretinal wireless photovoltaic microchip implantation in non-human primate and feline models

Purpose To evaluate the surgical technique for subretinal implantation of two sizes of PRIMA photovoltaic wireless microchip in two animal models, and refine these surgical procedures for human trials. Methods Cats and Macaca fascicularis primates with healthy retina underwent vitrectomy surgery and were implanted with subretinal wireless photovoltaic microchip at the macula/central retina. The 1.5mm PRIMA chip was initially studied in feline eyes. PRIMA implant (2mm,1.5mm sizes) arrays were studied in primates. Feasibility of subretinal chip implantation was evaluated with a newly-developed surgical technique, with surgical complications and adverse events recorded. Results The 1.5mm implant was placed in the central retina of 11 feline eyes, with implantation duration 43-106 days. The 1.5mm implant was correctly positioned into central macula of 11 primate eyes, with follow-up periods of minimum 6 weeks (n = 11), 2 years (n = 2), and one eye for 3 years. One primate eye underwent multi-chip 1.5mm implantation using two 1.5mm chips. The 2mm implant was delivered to 4 primate eyes. Optical coherence tomography confirmed correct surgical placement of photovoltaic arrays in the subretinal space in all 26 eyes. Intraoperative complications in primate eyes included retinal tear, macular hole, retinal detachment, and vitreous hemorrhage that resolved spontaneously. Postoperatively, there was no case of significant ocular inflammation in the 1.5mm implant group. Conclusions We report subretinal implantation of 1.5mm and 2mm photovoltaic arrays in the central retina of feline and central macula of primate eyes with a low rate of device-related complications. The in vivo PRIMA implantation technique has been developed and refined for use for a 2mm PRIMA implant in ongoing human trials

PRIMA subretinal wireless photovoltaic microchip implantation in non-human primate and feline models

PURPOSE: To evaluate the surgical technique for subretinal implantation of two sizes of PRIMA photovoltaic wireless microchip in two animal models, and refine these surgical procedures for human trials. METHODS: Cats and Macaca fascicularis primates with healthy retina underwent vitrectomy surgery and were implanted with subretinal wireless photovoltaic microchip at the macula/central retina. The 1.5mm PRIMA chip was initially studied in feline eyes. PRIMA implant (2mm,1.5mm sizes) arrays were studied in primates. Feasibility of subretinal chip implantation was evaluated with a newly-developed surgical technique, with surgical complications and adverse events recorded. RESULTS: The 1.5mm implant was placed in the central retina of 11 feline eyes, with implantation duration 43-106 days. The 1.5mm implant was correctly positioned into central macula of 11 primate eyes, with follow-up periods of minimum 6 weeks (n = 11), 2 years (n = 2), and one eye for 3 years. One primate eye underwent multi-chip 1.5mm implantation using two 1.5mm chips. The 2mm implant was delivered to 4 primate eyes. Optical coherence tomography confirmed correct surgical placement of photovoltaic arrays in the subretinal space in all 26 eyes. Intraoperative complications in primate eyes included retinal tear, macular hole, retinal detachment, and vitreous hemorrhage that resolved spontaneously. Postoperatively, there was no case of significant ocular inflammation in the 1.5mm implant group. CONCLUSIONS: We report subretinal implantation of 1.5mm and 2mm photovoltaic arrays in the central retina of feline and central macula of primate eyes with a low rate of device-related complications. The in vivo PRIMA implantation technique has been developed and refined for use for a 2mm PRIMA implant in ongoing human trials

완전 이식형 시각 보철 시스템을 위한 연구

학위논문(박사)--서울대학교 대학원 :공과대학 전기·정보공학부,2020. 2. 김성준.A visual prosthetic system typically consists of a neural stimulator, which is a surgically implantable device for electrical stimulation intended to restore the partial vision of blind patients, and peripheral external devices including an image sensor, a controller, and a processor. Although several visual prosthetic systems, such as retinal prostheses or retinal implants, have already been commercialized, there are still many issues on them (e.g., substrate materials for implantable units, electrode configurations, the use of external hardware, power supply and data transmission methods, design and fabrication approaches, etc.) to be dealt with for an improved visual prosthetic system. In this dissertation, a totally implantable visual prosthetic system is suggested with four motivations, which are thought to be important, as in the following: 1) simple fabrication of implantable parts, such as micro-sized electrodes and a case, for a neural stimulator based on polymer without semiconductor techniques, 2) multi-polar stimulation for virtual channel generation to overcome a limited number of physical electrodes in a confined space, 3) a new image acquisition strategy using an implantable camera, and 4) power supply as well as data transmission to a neural stimulator without hindering patients various activities. First, polymer materials have been widely used to develop various implantable devices for visual prosthetic systems because of their outstanding advantages including flexibility and applicability to microfabrication, compared with metal, silicon, or ceramic. Most polymer-based implantable devices have been fabricated by the semiconductor technology based on metal deposition and photolithography. This technology provides high accuracy and precision for metal patterning on a polymer substrate. However, the technology is also complicated and time-consuming as it requires masks for photolithography and vacuum for metal deposition as well as huge fabrication facilities. This is the reason why biocompatible cyclic olefin polymer (COP) with low water absorption (<0.01 %) and high light transmission (92 %) was chosen as a new substrate material of an implantable device in this study. Based on COP, simple fabrication process of an implantable device was developed without masks, vacuum, and huge fabrication facilities. COP is characterized by strong adhesion to gold and high ultraviolet (UV) transparency as well. Because of such adhesion and UV transparency, a gold thin film can be thermally laminated on a COP substrate with no adhesion layer and micromachined by a UV laser without damaging the substrate. Using the developed COP-based process, a depth-type microprobe was fabricated first, and its electrochemical and mechanical properties as well as functionality were evaluated by impedance measurements, buckling tests, and in vivo neural signal recording, respectively. Furthermore, the long-term reliability of COP encapsulation formed by the developed process was estimated through leakage current measurements during accelerated aging in saline solution, to show the feasibility of the encapsulation using COP as well. Second, even if stimulation electrodes become sufficiently small, it is demanding to arrange them for precise stimulation on individual neurons due to electrical crosstalk, which is the spatial superposition of electric fields generated by simultaneous stimuli. Hence, an adequate spacing between adjacent electrodes is required, and this causes a limited number of physical electrodes in a confined space such as in the brain or in the retina. To overcome this limitation, many researchers have proposed stimulation strategies using virtual channels, which are intermediate areas with large magnitudes of electric fields between physical electrodes. Such virtual channels can be created by multi-polar stimulation that can combine stimuli output from two or more electrodes at the same time. To produce more delicate stimulation patterns using virtual channels herein, penta-polar stimulation with a grid-shaped arrangement of electrodes was leveraged specially to generate them in two dimensions. This penta-polar stimulation was realized using a custom-designed integrated circuit with five different current sources and surface-type electrodes fabricated by the developed COP-based process. The effectiveness of the penta-polar stimulation was firstly evaluated by focusing electric fields in comparison to mono-polar stimulation. In addition, the distribution of electric fields changed by the penta-polar stimulation, which indicated virtual channel generation, was estimated in accordance with an amplitude ratio between stimuli of the two adjacent electrodes and a distance from them, through both finite element analysis and in vitro evaluation. Third, an implantable camera is herein proposed as a new image acquisition approach capturing real-time images while implanted in the eye, to construct a totally implantable visual prosthetic system. This implantable camera has distinct advantages in that it can provide blind patients with benefits to perform several ordinary activities, such as sleep, shower, or running, while focusing on objects in accordance with natural eye movements. These advantages are impossible to be achieved using a wearing unit such as a glasses-mounted camera used in a conventional partially implantable visual prosthetic system. Moreover, the implantable camera also has a merit of garnering a variety of image information using the complete structure of a camera, compared with a micro-photodiode array of a retinal implant. To fulfill these advantageous features, after having been coated with a biocompatible epoxy to prevent moisture penetration and sealed using a medical-grade silicone elastomer to gain biocompatibility as well as flexibility, the implantable camera was fabricated enough to be inserted into the eye. Its operation was assessed by wireless image acquisition that displayed a processed black and white image. In addition, to estimate reliable wireless communication ranges of the implantable camera in the body, signal-to-noise ratio measurements were conducted while it was covered by an 8-mm-thick biological medium that mimicked an in vivo environment. Lastly, external hardware attached on the body has been generally used in conventional visual prosthetic systems to stably deliver power and data to implanted units and to acquire image signals outside the body. However, there are common problems caused by this external hardware, including functional failure due to external damages, unavailability during sleep, in the shower, or while running or swimming, and cosmetic issues. Especially, an external coil for power and data transmission in a conventional visual prosthetic system is connected to a controller and processor through a wire, which makes the coil more vulnerable to the problems. To solve this issue, a totally implantable neural stimulation system controlled by a handheld remote controller is presented. This handheld remote controller can control a totally implantable stimulator powered by a rechargeable battery through low-power but relatively long-range ZigBee wireless communication. Moreover, two more functions can be performed by the handheld controller for expanded applications; one is percutaneous stimulation, and the other is inductive charging of the rechargeable battery. Additionally, simple switches on the handheld controller enable users to modulate parameters of stimuli like a gamepad. These handheld and user-friendly interfaces can make it easy to use the controller under various circumstances. The functionality of the controller was evaluated in vivo, through percutaneous stimulation and remote control especially for avian navigation, as well as in vitro. Results of both in vivo experiments were compared in order to verify the feasibility of remote control of neural stimulation using the controller. In conclusion, several discussions on results of this study, including the COP-based simple fabrication process, the penta-polar stimulation, the implantable camera, and the multi-functional handheld remote controller, are addressed. Based on these findings and discussions, how the researches in this thesis can be applied to the realization of a totally implantable visual prosthetic system is elucidated at the end of this dissertation.시각 보철 시스템은 일반적으로 실명 환자들의 부분 시력을 전기 자극으로 회복시키기 위하여 수술적으로 이식될 수 있는 장치인 신경 자극기와 이미지 센서 또는 컨트롤러, 프로세서를 포함하는 외부의 주변 장치들로 구성된다. 망막 보철 장치 또는 망막 임플란트와 같이 몇몇 시각 보철 시스템은 이미 상용화 되었지만, 여전히 더 나은 시각 보철 시스템을 위하여 다뤄져야 할 많은 이슈들 (예를 들어, 이식형 장치의 기판 물질, 전극의 배열, 외부 하드웨어의 사용, 전력 공급 및 데이터 전송 방법, 설계 및 제작 방식 등)이 있다. 본 학위논문은 완전 이식형 시각 보철 시스템을 제안하며, 이를 위하여 다음과 같이 중요하다고 생각되는 총 네 가지의 이슈들과 관련된 연구 내용을 다룬다. 1) 폴리머를 기반으로 한 신경 자극기의 미세 전극 및 패키지와 같은 이식 가능한 부분을 반도체 기술 없이 간단하게 제작하는 방법과 2) 제한된 공간에서 전극 개수의 물리적인 한계를 극복하기 위하여 가상 채널을 형성하는 다극성 자극 방식, 3) 이식형 카메라를 사용하는 새로운 이미지 획득 전략, 4) 환자의 다양한 활동을 방해하지 않으면서 신경 자극기에 전력을 공급하고 데이터를 전송하는 방법. 첫째로, 금속이나 실리콘, 세라믹에 비하여 폴리머는 유연성 및 미세 제작에의 적용 가능성을 포함하는 두드러진 이점들이 있기 때문에 시각 보철 시스템을 구성하는 다양한 이식 가능한 부분들에 널리 이용되었다. 대부분의 폴리머 기반 이식형 장치들은 금속 증착과 사진 식각을 기반으로 하는 반도체 공정으로 제작되었다. 이 공정은 폴리머 기판 위에 금속을 패터닝 하는 데에 있어서 높은 정확성과 정밀도를 제공한다. 하지만 그 공정은 또한, 사진 식각에 쓰이는 마스크와 금속 증착을 위한 진공뿐만 아니라 아주 큰 공정 설비를 요구하기 때문에 시간 소모가 심하고 복잡하다. 이는 본 연구에서 낮은 수분 흡수 (<0.01 %)와 높은 빛 투과 (92 %)를 특징으로 하는 생체적합한 고리형 올레핀 폴리머 (cyclic olefin polymer, COP)가 이식형 장치를 위한 새로운 기판 물질로써 선택된 이유이다. COP를 기반으로 하여, 마스크와 진공, 큰 공정 설비가 필요 없이 이식 가능한 장치를 간단하게 제작하는 공정이 개발되었다. COP는 금과의 강한 접합과 자외선에 대한 높은 투명성을 또 다른 특징으로 한다. 이와 같은 접합 특성과 자외선 투명성 덕분에, 금박은 COP 기판에 별도의 접합층 없이 열로 접합될 수 있을 뿐만 아니라 그 기판에 손상을 주지 않으면서 자외선 레이저를 통하여 미세하게 가공될 수 있다. 개발된 COP 기반의 공정을 처음으로 사용하여 침습형 미세 프로브가 제작되었고, 그 전기화학적, 기계적 특성과 기능성이 각각 임피던스 측정과 버클링 테스트, 생체 내 신경신호 기록으로 평가되었다. 그리고 COP를 사용한 밀봉의 가능성도 알아보기 위하여, 개발된 공정을 사용하여 형성된 COP 밀봉의 장기 안정성이 생리식염수에서의 가속 노화 중 누설 전류 측정을 통하여 추정되었다. 둘째로, 자극 전극의 크기가 충분히 작아진다고 하더라도, 동시에 출력되는 자극에 의해 형성되는 전기장의 중첩인 크로스 토크 때문에 개개의 신경세포를 정밀하게 자극하기 위하여 전극을 배열하는 것은 아주 어렵다. 따라서 인접한 전극 사이에 적당한 간격이 필요하게 되고, 이는 특히 뇌 또는 망막과 같은 제한된 공간에서 전극 개수의 물리적인 한계를 야기한다. 이 한계를 극복하기 위하여, 많은 연구자들은 실제 전극 사이에서 큰 전기장 세기를 갖는 중간 영역을 나타내는 가상 채널을 이용한 자극 전략을 제안하였다. 이러한 가상 채널은 둘 이상의 전극에서 동시에 출력되는 자극 파형을 합칠 수 있는 다극성 자극에 의하여 형성이 가능하다. 본 연구에서는 가상 채널을 이용하여 더 정교한 자극 패턴을 만들기 위하여, 특히 2차원에서의 가상 채널을 생성하고자 격자형 배열의 전극과 함께 5극성 자극이 사용되었다. 이 5극성 자극은 다섯 개의 서로 다른 전류원을 갖도록 맞춤 설계된 집적회로와 개발된 COP 기반 공정으로 제작된 평면형 전극을 사용하여 구현되었다. 먼저, 5극성 자극의 효과를 확인하고자 이 자극으로 전기장을 한 곳에 더 집중된 형태로 만들 수 있음이 단극성 자극과의 비교를 통하여 검증되었다. 그리고 유한 요소 분석과 생체 외 평가 둘 모두를 통하여, 5극성 자극으로 인한 가상 채널 형성을 뜻하는 전기장 분포가 인접한 두 전극에서 나오는 자극의 진폭비와 그 전극으로부터 떨어진 거리에 따라 변화됨이 추정되었다. 셋째로, 본 연구에서는 눈에 이식된 채로 실시간 이미지를 얻음으로써 완전 이식형 시각 보철 시스템을 구성하는 이식형 카메라를 새로운 이미지 획득 방식으로써 제안한다. 이 이식형 카메라는 실명 환자들이 자연스러운 눈의 움직임을 따라서 물체를 볼 수 있으며 잠이나 샤워, 달리기와 같은 일상적인 활동들을 방해 받지 않고 수행할 수 있도록 돕는다는 점에서 독특한 장점을 갖는다. 기존의 부분 이식형 시각 보철 시스템에서 쓰이는 안경 부착형 카메라와 같은 착용 장비로는 이러한 장점들을 얻을 수 없다. 게다가, 이식형 카메라는 망막 임플란트의 미세 포토다이오드 어레이와 달리 완전한 카메라 구조를 이용하여 다양한 이미지 정보를 획득할 수 있다는 장점을 갖는다. 이러한 이점들을 달성하기 위하여, 그 이식형 카메라는 수분 침투를 막고자 생체적합한 에폭시로 코팅되었고 생체적합성과 유연성을 얻기 위하여 의료용 실리콘 엘라스토머로 밀봉된 후에 눈에 충분히 삽입될 수 있는 형태 및 크기로 제작되었다. 이 장치의 동작은 흑백으로 처리된 이미지를 표시하는 무선 이미지 획득으로 시험되었다. 그리고 몸 안에서 이식형 카메라 갖는 안정적인 통신 거리를 측정하기 위하여, 장치가 생체 내 환경을 모사하기 위한 8 mm 두께의 생체 물질로 덮인 상태에서 그 장치의 신호 대 잡음비가 측정되었다. 마지막으로, 기존의 시각 보철 시스템에서 몸에 부착된 형태의 외부 하드웨어는 이식된 장치에 전력과 데이터를 안정적으로 전달하고 이미지 신호를 수집하기 위하여 일반적으로 사용되었다. 그럼에도 불구하고, 이러한 하드웨어는 외부로부터의 손상으로 인한 기능적인 결함과 수면 및 샤워, 달리기, 수영 활동 중 이용 불가능성, 외형적인 이슈 등을 포함하는 공통적인 문제들을 야기한다. 전력 및 데이터 전송을 위한 외부 코일은 시각 보철 시스템에서 컨트롤러와 프로세서에 유선으로 연결되고, 이러한 연결은 그 코일이 앞서 언급된 문제들에 특히 취약하게 만든다. 이러한 이슈를 해결하고자, 휴대용 무선 컨트롤러로 제어되는 완전 이식형 신경 자극 시스템이 제안된다. 이 휴대용 무선 컨트롤러는 저전력이지만 비교적 장거리 통신이 가능한 직비 (ZigBee) 무선 통신을 통하여 재충전 가능한 배터리로 동작하는 완전 이식형 자극기를 제어할 수 있다. 이 외에도, 이 휴대용 컨트롤러를 사용하면 폭넓은 응용을 위한 두 가지 기능을 추가로 수행할 수 있다. 하나는 유선 경피 자극이며, 다른 하나는 재충전 가능한 배터리의 유도 충전 기능이다. 또한, 이 휴대용 컨트롤러의 간단한 스위치를 사용하면 사용자는 게임패드와 같이 자극 파라미터를 쉽게 조절할 수 있다. 이러한 휴대 가능하고 사용자 친화적인 인터페이스를 통해 다양한 상황에서 그 컨트롤러를 쉽게 사용할 수 있다. 그 컨트롤러의 기능은 생체 외 평가뿐만 아니라 조류의 움직임 제어를 위한 유선 경피 자극 및 원격 제어를 통해 생체 내에서도 평가되었다. 또한, 그 컨트롤러를 사용한 원격 신경 자극 제어의 수행 가능성을 검증하기 위하여 두 생체 내 실험의 결과가 서로 비교되었다. 결론적으로, COP 기반의 간단한 제작 공정과 5극성 자극, 이식형 카메라, 휴대용 다기능 무선 컨트롤러를 포함하는 연구 결과에 대한 여러 논의가 이루어진다. 그리고 이러한 결과와 고찰에 기초하여, 본 학위논문의 연구가 완전 이식형 시각 보철 시스템의 구현에 어떻게 적용될 수 있는 지가 이 논문의 끝에서 상세히 설명된다.Abstract ------------------------------------------------------------------ i Contents ---------------------------------------------------------------- vi List of Figures ---------------------------------------------------------- xi List of Tables ----------------------------------------------------------- xx List of Abbreviations ------------------------------------------------ xxii Chapter 1. Introduction --------------------------------------------- 1 1.1. Visual Prosthetic System --------------------------------------- 2 1.1.1. Current Issues ------------------------------------------------- 2 1.1.1.1. Substrate Materials ---------------------------------------- 3 1.1.1.2. Electrode Configurations --------------------------------- 5 1.1.1.3. External Hardware ----------------------------------------- 6 1.1.1.4. Other Issues ------------------------------------------------- 7 1.2. Suggested Visual Prosthetic System ------------------------ 8 1.3. Four Motivations ---------------------------------------------- 10 1.4. Proposed Approaches ---------------------------------------- 11 1.4.1. Cyclic Olefin Polymer (COP) ------------------------------ 11 1.4.2. Penta-Polar Stimulation ----------------------------------- 13 1.4.3. Implantable Camera --------------------------------------- 16 1.4.4. Handheld Remote Controller ---------------------------- 18 1.5. Objectives of this Dissertation ------------------------------ 20 Chapter 2. Materials and Methods ----------------------------- 23 2.1. COP-Based Fabrication and Encapsulation -------------- 24 2.1.1. Overview ----------------------------------------------------- 24 2.1.2. Simple Fabrication Process ------------------------------- 24 2.1.3. Depth-Type Microprobe ---------------------------------- 26 2.1.3.1. Design ----------------------------------------------------- 26 2.1.3.2. Characterization ----------------------------------------- 27 2.1.3.3. In Vivo Neural Signal Recording ---------------------- 30 2.1.4. COP Encapsulation ---------------------------------------- 31 2.1.4.1. In Vitro Reliability Test ---------------------------------- 33 2.2. Penta-Polar Stimulation ------------------------------------- 34 2.2.1. Overview ---------------------------------------------------- 34 2.2.2. Design and Fabrication ----------------------------------- 35 2.2.2.1. Integrated Circuit (IC) Design ------------------------- 35 2.2.2.2. Surface-Type Electrode Fabrication ------------------ 38 2.2.3. Evaluations -------------------------------------------------- 39 2.2.3.1. Focused Electric Field Measurement ---------------- 42 2.2.3.2. Steered Electric Field Measurement ----------------- 42 2.3. Implantable Camera ----------------------------------------- 43 2.3.1. Overview ---------------------------------------------------- 43 2.3.2. Design and Fabrication ----------------------------------- 43 2.3.2.1. Circuit Design -------------------------------------------- 43 2.3.2.2. Wireless Communication Program ------------------ 46 2.3.2.3. Epoxy Coating and Elastomer Sealing -------------- 47 2.3.3. Evaluations ------------------------------------------------- 50 2.3.3.1. Wireless Image Acquisition --------------------------- 50 2.3.3.2. Signal-to-Noise Ratio (SNR) Measurement -------- 52 2.4. Multi-Functional Handheld Remote Controller --------- 53 2.4.1. Overview ---------------------------------------------------- 53 2.4.2. Design and Fabrication ----------------------------------- 53 2.4.2.1. Hardware Description ---------------------------------- 53 2.4.2.2. Software Description ----------------------------------- 57 2.4.3. Evaluations -------------------------------------------------- 57 2.4.3.1. In Vitro Evaluation -------------------------------------- 57 2.4.3.2. In Vivo Evaluation --------------------------------------- 59 Chapter 3. Results ------------------------------------------------- 61 3.1. COP-Based Fabrication and Encapsulation ------------- 62 3.1.1. Fabricated Depth-Type Microprobe ------------------- 62 3.1.1.1. Electrochemical Impedance -------------------------- 63 3.1.1.2. Mechanical Characteristics --------------------------- 64 3.1.1.3. In Vivo Neural Signal Recording --------------------- 66 3.1.2. COP Encapsulation --------------------------------------- 68 3.1.2.1. In Vitro Reliability Test --------------------------------- 68 3.2. Penta-Polar Stimulation ------------------------------------ 70 3.2.1. Fabricated IC and Surface-Type Electrodes ---------- 70 3.2.2. Evaluations ------------------------------------------------- 73 3.2.2.1. Focused Electric Field Measurement --------------- 73 3.2.2.2. Steered Electric Field Measurement ---------------- 75 3.3. Implantable Camera ---------------------------------------- 76 3.3.1. Fabricated Implantable Camera ----------------------- 76 3.3.2. Evaluations ------------------------------------------------ 77 3.3.2.1. Wireless Image Acquisition -------------------------- 77 3.3.2.2. SNR Measurement ------------------------------------ 78 3.4. Multi-Functional Handheld Remote Controller ------- 80 3.4.1. Fabricated Remote Controller ------------------------- 80 3.4.2. Evaluations ------------------------------------------------ 81 3.4.2.1. In Vitro Evaluation ------------------------------------ 81 3.4.2.2. In Vivo Evaluation ------------------------------------- 83 Chapter 4. Discussions ------------------------------------------ 86 4.1. COP-Based Fabrication and Encapsulation ------------ 87 4.1.1. Fabrication Process and Fabricated Devices -------- 87 4.1.2. Encapsulation and Optical Transparency ------------ 89 4.2. Penta-Polar Stimulation------------------------------------ 99 4.2.1. Designed IC and Electrode Configurations --------- 99 4.2.2. Virtual Channels in Two Dimensions ---------------- 101 4.3. Implantable Camera -------------------------------------- 102 4.3.1. Enhanced Reliability by Epoxy Coating ------------- 106 4.4. Multi-Functional Handheld Remote Controller ------ 107 4.4.1. Brief Discussions of the Two Extra Functions ------ 108 4.5. Totally Implantable Visual Prosthetic System --------- 113 Chapter 5. Conclusion ------------------------------------------ 117 References -------------------------------------------------------- 121 Supplements ------------------------------------------------------ 133 국문 초록 ----------------------------------------------------------- 143Docto

Modulation Techniques for Biomedical Implanted Devices and Their Challenges

Implanted medical devices are very important electronic devices because of their usefulness in monitoring and diagnosis, safety and comfort for patients. Since 1950s, remarkable efforts have been undertaken for the development of bio-medical implanted and wireless telemetry bio-devices. Issues such as design of suitable modulation methods, use of power and monitoring devices, transfer energy from external to internal parts with high efficiency and high data rates and low power consumption all play an important role in the development of implantable devices. This paper provides a comprehensive survey on various modulation and demodulation techniques such as amplitude shift keying (ASK), frequency shift keying (FSK) and phase shift keying (PSK) of the existing wireless implanted devices. The details of specifications, including carrier frequency, CMOS size, data rate, power consumption and supply, chip area and application of the various modulation schemes of the implanted devices are investigated and summarized in the tables along with the corresponding key references. Current challenges and problems of the typical modulation applications of these technologies are illustrated with a brief suggestions and discussion for the progress of implanted device research in the future. It is observed that the prime requisites for the good quality of the implanted devices and their reliability are the energy transformation, data rate, CMOS size, power consumption and operation frequency. This review will hopefully lead to increasing efforts towards the development of low powered, high efficient, high data rate and reliable implanted devices

Information transmission in normal vision and optogenetically resensitised dystrophic retinas

Phd ThesisThe retina is a sophisticated image processing machine, transforming the visual scene as detected by the photoreceptors into a pattern of action potentials that is sent to the brain by the retinal ganglion cells (RGCs), where it is further processed to help us understand and navigate the world. Understanding this encoding process is important on a number of levels. First, it informs the study of upstream visual processing by elucidating the signals higher visual areas receive as input and how they relate to the outside world. Second, it is important for the development of treatments for retinal blindness, such as retinal prosthetics. In this thesis, I present work using multielectrode array (MEA) recordings of RGC populations from ex-vivo retinal wholemounts to study various aspects of retinal information processing. My results fall into two main themes. In the rst part, in collaboration with Dr Geo rey Portelli and Dr Pierre Kornprobst of INRIA, I use ashed gratings of varying spatial frequency and phase to compare di erent coding strategies that the retina might use. These results show that information is encoded synergistically by pairs of neurons and that, of the codes tested, a Rank Order Code based on the relative order of ring of the rst spikes of a population of neurons following a stimulus provides information about the stimulus faster and more e ciently than other codes. In the later parts, I use optogenetic stimulation of RGCs in congenitally blind retinas to study how visual information is corrupted by the spontaneous hyperactivity that arises as a result of photoreceptor degeneration. I show that by dampening this activity with the gap junction blocker meclofenamic acid, I can improve the signal-to-noise ratio, spatial acuity and contrast sensitivity of prosthetically evoked responses. Taken together, this work provides important insights for the future development of retinal prostheses