Full-duplex wireless communications: challenges, solutions and future research directions

The family of conventional half-duplex (HD) wireless systems relied on transmitting and receiving in different time-slots or frequency sub-bands. Hence the wireless research community aspires to conceive full-duplex (FD) operation for supporting concurrent transmission and reception in a single time/frequency channel, which would improve the attainable spectral efficiency by a factor of two. The main challenge encountered in implementing an FD wireless device is the large power difference between the self-interference (SI) imposed by the device’s own transmissions and the signal of interest received from a remote source. In this survey, we present a comprehensive list of the potential FD techniques and highlight their pros and cons. We classify the SI cancellation techniques into three categories, namely passive suppression, analog cancellation and digital cancellation, with the advantages and disadvantages of each technique compared. Specifically, we analyse the main impairments (e.g. phase noise, power amplifier nonlinearity as well as in-phase and quadrature-phase (I/Q) imbalance, etc.) that degrading the SI cancellation. We then discuss the FD based Media Access Control (MAC)-layer protocol design for the sake of addressing some of the critical issues, such as the problem of hidden terminals, the resultant end-to-end delay and the high packet loss ratio (PLR) due to network congestion. After elaborating on a variety of physical/MAC-layer techniques, we discuss potential solutions conceived for meeting the challenges imposed by the aforementioned techniques. Furthermore, we also discuss a range of critical issues related to the implementation, performance enhancement and optimization of FD systems, including important topics such as hybrid FD/HD scheme, optimal relay selection and optimal power allocation, etc. Finally, a variety of new directions and open problems associated with FD technology are pointed out. Our hope is that this treatise will stimulate future research efforts in the emerging field of FD communication

Multipacket reception in the presence of in-band full-duplex communication

In-Band Full-DupleX (IB-FDX) is defined as the ability for nodes to transmit and receive signals simultaneously on the same channel. Conventional digital wireless networks do not implement it, since a node’s own transmission signal causes interference to the signal it is trying to receive. However, recent studies attempt to overcome this obstacle, since it can potentially double the spectral efficiency of current wireless networks. Different mechanisms exist today that are able to reduce a significant part of the Self- Interference (SI), although specially tuned Medium Access Control (MAC) protocols are required to optimize its use. One of IB-FDX’s biggest problems is that the nodes’ interference range is extended, meaning the unusable space for other transmissions and receptions is broader. This dissertation proposes using MultiPacket Reception (MPR) to address this issue and adapts an already existing Single-Carrier with Frequency-Domain Equalization (SC-FDE) receiver to IB-FDX. The performance analysis suggests that MPR and IB-FDX have a strong synergy and are able to achieve higher data rates, when used together. Using analytical models, the optimal transmission patterns and transmission power were identified, which maximize the channel capacity with the minimal energy consumption. This was used to define a new MAC protocol, named Full-duplex Multipacket reception Medium Access Control (FM-MAC). FM-MAC was designed for a single-hop cellular infrastructure, where the Access Point (AP) and the terminals implement both IB-FDX and MPR. It divides the coverage range of the AP into a closer Full-DupleX (FDX) zone and a farther Half-DupleX (HDX) zone and adds a tunable fairness mechanism to avoid terminal starvation. Simulation results show that this protocol provides efficient support for both HDX and FDX terminals, maximizing its capacity when more FDX terminals are used

A Passive UHF RFID System over Ethernet Cable for Long Range Detection

This paper proposes a new form of passive UHF RFID system which has high tag detection accuracy but lower costs than existing systems for wide-range RFID scenarios requiring greater flexibility. This new system concept consists of a central baseband controller and a remote antenna subsystem, connected using a twisted-pair cable. Baseband signals are transmitted over the twisted-pair cable during the inventory session, and the transmitted radio frequency (RF) signals are up and down converted in the antenna subsystem. – 88 dBm reader sensitivity is achieved with an active leakage cancellation block, showing little degradation in tag detection performance over a 300m of Cat5e cable between the controller and the antenna. An average leakage suppression of 36.9 dB can be achieved with a fixed transmission power of 26.5 dBm. Compared with conventional RFID systems using coaxial cables between the reader and antenna, the presented system is superior in terms of link distance, link cost, and installation flexibility

Non-Orthogonal Signal and System Design for Wireless Communications

The thesis presents research in non-orthogonal multi-carrier signals, in which: (i) a new signal format termed truncated orthogonal frequency division multiplexing (TOFDM) is proposed to improve data rates in wireless communication systems, such as those used in mobile/cellular systems and wireless local area networks (LANs), and (ii) a new design and experimental implementation of a real-time spectrally efficient frequency division multiplexing (SEFDM) system are reported. This research proposes a modified version of the orthogonal frequency division multiplexing (OFDM) format, obtained by truncating OFDM symbols in the time-domain. In TOFDM, subcarriers are no longer orthogonally packed in the frequency-domain as time samples are only partially transmitted, leading to improved spectral efficiency. In this work, (i) analytical expressions are derived for the newly proposed TOFDM signal, followed by (ii) interference analysis, (iii) systems design for uncoded and coded schemes, (iv) experimental implementation and (v) performance evaluation of the new proposed signal and system, with comparisons to conventional OFDM systems. Results indicate that signals can be recovered with truncated symbol transmission. Based on the TOFDM principle, a new receiving technique, termed partial symbol recovery (PSR), is designed and implemented in software de ned radio (SDR), that allows efficient operation of two users for overlapping data, in wireless communication systems operating with collisions. The PSR technique is based on recovery of collision-free partial OFDM symbols, followed by the reconstruction of complete symbols to recover progressively the frames of two users suffering collisions. The system is evaluated in a testbed of 12-nodes using SDR platforms. The thesis also proposes channel estimation and equalization technique for non-orthogonal signals in 5G scenarios, using an orthogonal demodulator and zero padding. Finally, the implementation of complete SEFDM systems in real-time is investigated and described in detail

隠れ端末問題及びフロー内干渉キャンセルを考慮したワイヤレスアドホックネットワークに関する研究

Performance of CSMA/CA (carrier sense multiple access/collision avoidance) wireless ad hoc network is severely affected by hidden terminal (HT) problem that results in the failure of carrier sense and causes the packet error due to collision. This thesis proposes a method of improving the performance of multi-hop ad hoc network by 4 steps which can be summarized as follows. First, the thesis analyzes HT effect on CSMA/CA unicast communication taking into account actual radio environments including both fading and capture effect. Based on the analysis results, it is predicted that multi-hop transmission is vulnerable to HT problem because of intra-flow interference (IFI). Regarding to this issue, as the second step, a CINR (carrier to interference and noise ratio) -based analysis method is proposed that can precisely estimate the packet delivery probability for CSMA/CA multi-hop transmission suffering from HT-caused IFI under fading environment. The results prove that conventional CSMA/CA media access control cannot achieve efficient multi-hop transmission. Therefore, as the third step, this thesis further proposes IFI-canceling multi-hop transmission (IFIC-MHT) scheme that enables efficient relaying with the highest traffic load for half-duplex multi-hop networks. The interference cancellation (IC) technique employs adaptive signal processing with a normalized least mean square (NLMS) algorithm for channel estimation and has good BER (bit error rate) and PER (packet error rate) performance under a wide range of SNR (signal to noise ratio) and SIR (signal to interference ratio) conditions. A multi-hop packet transmission frame format dedicated to the IFIC is designed. Finally, this thesis studies the effect of IFIC on large-scale ad hoc network where both intra-flow interference and inter-flow interference take place and together affect the multi-hop transmission.電気通信大学201

Analysis of asymmetry of traffic in full-duplex wireless local area network

Mestrado de dupla diplomação com a UTFPR - Universidade Tecnológica Federal do ParanáThe standard commodity wireless hardware is half-duplex because there are challenges in full-duplex wireless that need attention and improvement. The self-interference in radios is one of the big challenges, but, even though there is no standard yet, there are several proposals that cancel enough self-interference that it is possible for communication to be successfully made. The standard half-duplex rules of the media access control (MAC) protocol contained on wireless cards do not accept simultaneous transmissions, because simultaneous transmissions are likely to collide with each other. Therefore, full-duplex wireless networks need a new MAC protocol to be able to handle the different full-duplex transmissions, namely, symmetric and asymmetric. Symmetric full-duplex transmissions ocurr between just two stations, which can be managed trivially by a suitable MAC protocol. On the other hand, asymmetric transmissions occur in communications involving three stations, and those transmissions are likely to produce collisions if one station receives simultaneously signals from the two others. From the different difficulties of each transmission type, emerges the doubt about how many opportunities are there for a full-duplex wireless network to make each type of transmission. With the focus on this question, this research proposes a method to collect traffic data from a real half-duplex wireless local area network (WLAN) to measure the amount of full-duplex symmetric and asymmetric transmission opportunities. The proposed method relies on: the brcmfmac driver, to collect the traffic data in kernel space; the Ftrace tracing utility framework, to send the data from kernel to user space; a Raspberry Pi 3 B+, in which is installed the modified driver and tracing utility; and an estimate of the travel time of frames between the kernel and firmware. The results of this research include a method to collect traffic data with the goal of measuring the amount of full-duplex transmissions opportunities and their types in a real half-duplex WLAN. It is also presented the analysis of a small amount of data collected during four days as an example of the proposed method, which shows that 4.096% of the frames presented the proper conditions to symmetric transmissions, while only 0.025% in the case of asymmetric transmissions.Os dispositivos sem fio padrão são half-duplex, pois o full-duplex sem fio apresenta desafios que precisam receber atenção e melhorias. A auto-interferência presente é um dos desafios, mas, ainda que não haja padrão, existem algumas propostas que cancelam a auto-interferência a ponto de comunicações serem realizadas com sucesso. As regras padrão do protocolo de controle de acesso ao meio (MAC) half-duplex contido nas placas sem fio não permitem transmissões simultâneas, já que são propensas a causar colisões. Portanto, redes full-duplex sem fio precisam de um novo protocolo MAC para que os diferentes tipos de transmissão full-duplex (simétrico e assimétrico) sejam utilizados. As transmissões simétricas ocorrem em comunicações entre apenas duas estações, o que pode ser gerido de forma trivial por um protocolo MAC apropriado. Por outro lado, as transmissões assimétricas envolvem comunicações entre três estações, e estas transmissões são propensas a gerar colisões no caso de uma das estações receber sinal das outras duas, simultaneamente. Devido às diferentes dificuldades de cada tipo de transmissão, surge a dúvida sobre quantas oportunidades existem para comunicação full-duplex de cada tipo de transmissão. Com foco nessa questão, esta pesquisa propõe um método para coleta de dados de tráfego de uma rede de área local sem fio (WLAN) half-duplex com o objetivo de calcular a quantidade de oportunidades de transmissões full-duplex simétricas e assimétricas. O método proposto conta com: o driver brcmfmac, para coleta de dados de tráfego em ambiente de kernel; o Ftrace, ferramenta utilitária de rastreamento, usado para enviar os dados do kernel para o ambiente do usuário; um Raspberry Pi 3 B+, no qual é instalado o driver modificado e o utilitário de rastreamento; e, um cálculo para estimar o tempo de viagem de pacotes entre o kernel e o firmware. Os resultados desta pesquisa incluem um método de coleta de dados de tráfego com o objetivo de quantificar as oportunidades de transmissões full-duplex e seus tipos em uma WLAN real. Também é apresentado uma coleta feita por quatro dias como um exemplo do mesmo. A análise mostra que 4.096% dos pacotes apresentam condições adequadas para transmissões simétricas, e apenas 0.025% para transmissões assimétricas

Co-channel interference reduction in Optical Code Division Multiple Access systems

In this thesis few new code sets and a multi-user interference (MUI) cancellation scheme have been proposed for Optical Code Division Multiple Access (OCDMA) systems, which can be employed in the next generation of global communication networks to enhance their existing systems’ performance dramatically. The initial evaluation of the proposed code sets shows that their implementation improves the performance, decreases the BER and increases security considerably. Also the proposed MUI cancellation scheme totally removes all the cross-talk and interference between the active users within the network. These novel schemes and codes can be easily implemented in the optical packet switched networks. Optical switching has the ability of bandwidth manipulation at the wavelength level (e.g. with optical circuit/packet/burst switching); the capability to accommodate a wide range of traffic distributions, and also to make dynamic resource reservations possible. This thesis first gives a brief overview of co-channel interference reduction in OCDMA networks, then proposes two novel code sets, Uniform Cross-Correlation Modified Prime Code (UC-MPC) and Transposed UC-MPC (T-UCMPC), along with their evaluation and analysis in various systems, including IP routing over an OCDMA network. Thereafter, the new MUI cancellation scheme is proposed and then the proposed code sets and the MUI cancellation scheme are implemented and analysed in a laboratory-based experimental test bed. Finally the conclusion of this research is discussed