A compact dual-band implantable antenna for wireless biotelemetry in arteriovenous grafts

Arteriovenous grafts (AVGs) are indispensable life-saving implants for chronic kidney disease (CKD) patients undergoing hemodialysis. However, AVGs will often fail due to postoperative complications such as cellular accumulation termed restenosis, blood clots, and infections, which are dominant causes of morbidity and mortality. A new generation of hemodialysis implants equipped with biosensors and multi-band antennas for wireless power and telemetry systems that can detect specific pathological parameters and report AVGs’ patency would be transformative for CKD. Our study proposes a compact dual-band implantable antenna for hemodialysis monitoring applications. It operates in 1.4 GHz and 2.45 GHz for wireless power transfer and biotelemetry purposes. The miniaturized antenna with a current size of 5 × 5 × 0.635 mm 3 exhibits wide bandwidth (300 MHz at 1.4 GHz band and 380 MHz at 2.45 GHz band), along with good impedance matching at two resonance frequencies. In addition, simulations are performed separately in a three-layer homogenous phantom and a realistic human body model. Measurements of the proposed antenna are evaluated in minced pork. The measured results of the fabricated antenna prototype are closely harmonized with the simulation ones, and the effect of different proportions of fat tissue in pork mince was analyzed, to verify the sensitivity of the antenna to the contacting medium. The specific absorption rate (SAR) and link budget calculation are also analyzed. Finally, the wireless biotelemetry function of the proposed antenna is realized and visualized by adopting a pair of nRF24L01 wireless transceivers, and sustainable and stable wireless data transmission characteristics are shown at a high data rate of 2 Mbps with up to 20 cm transmission distance

Multilayered broadband antenna for compact embedded implantable medical devices: design and characterization

Design and characterization of a multilayered compact implantable broadband antenna for wireless biotelemetry applications is presented in this paper. The main features of this novel design are miniaturized size, structure that allows integration of electronic circuits of the implantable medical device inside the antenna, and enhanced bandwidth that mitigates possible frequency detuning caused by heterogeneity of biological tissues. Using electromagnetic simulations based on the finite-difference timedomain method, the antenna geometry was optimized to operate in the 401-406 MHz Medical Device Radio communications service band. The proposed design was simulated implanted in a muscle tissue cuboid phantom and implanted in the arm, head, and chest of a high-resolution whole-body anatomical numerical model of an adult human male. The antenna was fabricated using low-temperature co-fired ceramic technology. Measurements validated simulation results for the antenna implanted in muscle tissue cuboid phantom. The proposed compact antenna, with dimensions of 14 mm × 16 mm × 2 mm, presented a −10 dB bandwidth of 103 MHz and 92 MHz for simulations and measurements, respectively. The proposed antenna allows integration of electronic circuit up to 10 mm × 10 mm × 0.5 mm. Specific absorption rate distributions, antenna input power, radiation pattern and the transmission channel between the proposed antenna and a half-wavelength dipole were evaluated

Experimental Path Loss Models for In-Body Communications Within 2.36-2.5 GHz

"(c) 2015 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other users, including reprinting/ republishing this material for advertising or promotional purposes, creating new collective works for resale or redistribution to servers or lists, or reuse of any copyrighted components of this work in other works."Biomedical implantable sensors transmitting a variety of physiological signals have been proven very useful in the management of chronic diseases. Currently, the vast majority of these in-body wireless sensors communicate in frequencies below 1 GHz. Although the radio propagation losses through biological tissues may be lower in such frequencies, e.g., the medical implant communication services band of 402 to 405 MHz, the maximal channel bandwidths allowed therein constrain the implantable devices to low data rate transmissions. Novel and more sophisticated wireless in-body sensors and actuators may require higher data rate communication interfaces. Therefore, the radio spectrum above 1 GHz for the use of wearable medical sensing applications should be considered for in-body applications too. Wider channel bandwidths and smaller antenna sizes may be obtained in frequency bands above 1 GHz at the expense of larger propagation losses. Therefore, in this paper, we present a phantom-based radio propagation study for the frequency bands of 2360 to 2400 MHz, which has been set aside for wearable body area network nodes, and the industrial, scientific, medical band of 2400 to 2483.5 MHz. Three different channel scenarios were considered for the propagation measurements: in-body to in-body, in-body to on-body, and in-body to off-body.We provide for the first time path loss formulas for all these cases.Chavez-Santiago, R.; García Pardo, C.; Fornés Leal, A.; Vallés Lluch, A.; Vermeeren, G.; Joseph, W.; Balasingham, I.... (2015). Experimental Path Loss Models for In-Body Communications Within 2.36-2.5 GHz. IEEE Journal of Biomedical and Health Informatics. 19(3):930-937. doi:10.1109/JBHI.2015.2418757S93093719

Wireless Power Transfer Techniques for Implantable Medical Devices:A Review

Wireless power transfer (WPT) systems have become increasingly suitable solutions for the electrical powering of advanced multifunctional micro-electronic devices such as those found in current biomedical implants. The design and implementation of high power transfer efficiency WPT systems are, however, challenging. The size of the WPT system, the separation distance between the outside environment and location of the implanted medical device inside the body, the operating frequency and tissue safety due to power dissipation are key parameters to consider in the design of WPT systems. This article provides a systematic review of the wide range of WPT systems that have been investigated over the last two decades to improve overall system performance. The various strategies implemented to transfer wireless power in implantable medical devices (IMDs) were reviewed, which includes capacitive coupling, inductive coupling, magnetic resonance coupling and, more recently, acoustic and optical powering methods. The strengths and limitations of all these techniques are benchmarked against each other and particular emphasis is placed on comparing the implanted receiver size, the WPT distance, power transfer efficiency and tissue safety presented by the resulting systems. Necessary improvements and trends of each WPT techniques are also indicated per specific IMD

Market Analysis: Wavetrend Technologies, Inc.

Our project team performed a market analysis for Wavetrend Technologies, Inc. Wavetrend is a world leader in the deployment of comprehensive track-and-trace solutions providing real-time visibility of assets, people and modes of transportation. This project recommended implementation of RFID technology in the aviation and healthcare industries because of profit potential and the technology\u27s advantages. These recommendations were supported by a great deal of market research gathered from a variety of primary and secondary sources. Our key primary source was a survey distributed to a number of Wavetrend\u27s customers while our secondary sources consisted of various RFID technology periodicals, several academic publications in the WPI database, Yahoo! Finance, and ABI Research

Design of a Customized multipurpose nano-enabled implantable system for in-vivo theranostics

The first part of this paper reviews the current development and key issues on implantable multi-sensor devices for in vivo theranostics. Afterwards, the authors propose an innovative biomedical multisensory system for in vivo biomarker monitoring that could be suitable for customized theranostics applications. At this point, findings suggest that cross-cutting Key Enabling Technologies (KETs) could improve the overall performance of the system given that the convergence of technologies in nanotechnology, biotechnology, micro&nanoelectronics and advanced materials permit the development of new medical devices of small dimensions, using biocompatible materials, and embedding reliable and targeted biosensors, high speed data communication, and even energy autonomy. Therefore, this article deals with new research and market challenges of implantable sensor devices, from the point of view of the pervasive system, and time-to-market. The remote clinical monitoring approach introduced in this paper could be based on an array of biosensors to extract information from the patient. A key contribution of the authors is that the general architecture introduced in this paper would require minor modifications for the final customized bio-implantable medical device

Exploiting Near Field and Surface Wave Propagation for Implanted Devices

<p>This thesis examines the bandwidth shortcomings of conventional inductive coupling biotelemetry systems for implantable devices, and presents two approaches toward an end-to-end biotelemetry system for reducing the power consumption of implanted devices at increased levels of bandwidth. By leveraging the transition zone between the near and far field, scattering in the near field at UHF frequencies for increased bandwidth at low power budgets can be employed. Additionally, taking advantage of surface wave propagation permits the use of single-wire RF transmission lines in biological tissue, offering more efficient signal routing over near field coupling resulting in controlled implant depth at low power budgets.</p><p>Due to the dielectric properties of biological tissue, and the necessity to operate in the radiating near field to communicate via scattered fields, the implant depth drives the carrier frequency. The information bandwidth supplied by each sensing electrode in conventional implants also drives the operating frequency and regime. At typical implant depths, frequencies in the UHF range permit operation in the radiating near field as well as sufficient bandwidth.</p><p>Backscatter modulation provides a low-power, high-bandwidth alternative to conventional low frequency inductive coupling. A prototype active implantable device presented in this thesis is capable of transmitting data at 30 Mbps over a 915 MHz link while immersed in saline, at a communication efficiency of 16.4 pJ/bit. A prototype passive device presented in this thesis is capable of operating battery-free, fully immersed in saline, while transmitting data at 5 Mbps and consuming 1.23 mW. This prototype accurately demodulates neural data while immersed in saline at a distance of 2 cm. This communication distance is extended at similar power budgets by exploiting surface wave propagation along a single-wire transmission line. Theoretical models of single-wire RF transmission lines embedded in high permittivity and conductivity dielectrics are validated by measurements. A single-wire transmission line of radius 152.4 um exhibits a loss of 1 dB/cm at 915 MHz in saline, and extends the implant depth to 6 cm while staying within SAR limits.</p><p>This work opens the door for implantable biotelemetry systems to handle the vast amount of data generated by modern sensing devices, potentially offering new insight into neurological diseases, and may aid in the development of BMI's.</p>Dissertatio

의료용 인체 삽입물을 위한 무선 저전력 송수신기에 관한 연구

학위논문 (박사)-- 서울대학교 대학원 : 전기·컴퓨터공학부, 2016. 2. 남상욱.This thesis presents the wireless transceiver for medical implant application. The high propagation loss in human body which has high relative permittivity and conductive makes the implantable device be required for high sensitivity. Moreover, the device should have low power consumption to use for wireless implant medical application due to a restricted battery life. Also, this problem should be solved for on-body device considering integration with mobile device in the future. Simultaneously, the specific medical application such as epiretinal prosthesis, multi-channel electroencephalogram sensor demand high-data rate. Therefore, it is a main challenge that enhancing the devices power consumption and data-rate for implantable medical application. In order to enhance the performance of the device, several techniques are proposed in implantable human body transceivers. Firstly, the propagation loss in human-body is calculated for determine the frequency for medical implant application. The frequency bands allocated by FCC or MICS are too narrow and high lossy bands in human-body. For this reason, the optimum frequency for Implantable medical device is found by using Frisss formula and the link budget is calculated for capsule endoscopy system. The optimum frequency is verified through image recovery experiment in liquid human phantom and pig by using designed capsule endoscopy system. Secondly, the Super-Regenerative Receiver (SRR) with Digital Self-Quenching Loop (DSQL) is proposed for low power consumption. The proposed DSQL replaces the envelope detector used in a conventional SRR and minimizes power consumption by generating a self-quench signal digitally for a super-regenerative oscillator. The measurement results are given to show the performance of the proposed receiver. Thirdly, the RF Current Reused and Current Combining (CRCC) Power Amplifier (PA) is proposed for low power and high-speed transmitter. Normally, the PA having low output power has a feasibility issue that an optimum impedance of PA is too high to match with antenna impedance. For this reason, obtaining the maximum efficiency of PA is difficult for conventional structure. Moreover, conventional PAs output bandwidth is to be narrow due to high impedance transform ratio between PAs output and antennas input impedances. The CRCC structure solves this issue by decreasing the impedance transform ratio. The transmitter with CRCC PA is designed and verified through the measurement.Chapter 1. Introduction 1 1.1. WBAN (Wireless Body Area Network) 1 1.2. Challenges in Designing Transceiver for Medical Implant Application 7 Chapter 2. Propagation Loss in Human Body 10 2.1. Introduction 10 2.2. Far field approximation in human-body 13 2.3. Calculation of propagation loss in human-body 15 2.3.1. Frisss formula 15 2.3.2. Efficiency of transmitting antenna in human-body 17 2.4. Calculation of propagation loss in human-body and conclusion 19 Chapter 3. A Design of Transceiver for Capsule Endoscopy Application 21 3.1. Introduction 21 3.2. System Link Budget Calculation 24 3.3. Implementation 26 3.3.1. Transmitter with class B amplifier 26 3.3.2. Super-heterodyne receiver with AGC 28 3.3.3. Measurement results 30 3.4. Image recovery experiment 35 3.4.1. Integration of capsule endoscopy 35 3.4.2. Image recovery in the liquid human phantom 38 3.4.3. Image recovery in a pigs stomach and large intestine 40 3.5. Conclusion 41 Chapter 4. Super-Regenerative Receiver with Digitally Self-Quenching Loop 42 4.1. Introduction 42 4.1.1. Selection of receivers architecture for implantable medical device 44 4.1.2. Previous study of super-regenerative receiver 50 4.2. Main idea of proposed super-regenerative receiver 51 4.3. Description of proposed receiver 53 4.3.1. Digital self-quenching loop 55 4.3.2. Low noise amplifier and super-regenerative oscillator 57 4.3.3. Active RC filter for low power consumption 59 4.4. Experimental results 63 4.5. Summary and conclusion 69 Chapter 5. A Transmitter with Current-Reused and Current-Combining PA 71 5.1. Introduction 71 5.1.1. Previous study of OOK transmitter 72 5.2. Main idea of proposed transmitter 73 5.3. Description of proposed transmitter 79 5.3.1. Current-combining and current-reused PA 79 5.3.2. Ring oscillator with driving buffer 83 5.4. Experimental Results 85 5.5. Summary and conclusion 93 Chapter 6. Conclusion 95 Chapter 7. Appendix 97 7.1. Output spectrum of OOK signal 97 7.2. Theoretical BER of OOK comunication 99 Bibliography 101 초 록 109Docto