VCSEL-based, CWDM - PON systems using reflective technology for bi-directional multi-play service provision

Orthogonal frequency division multiplexing based on radio-overfiber schemes allows the direct use of multiple, native format wireless platforms. In combination with standard baseband provision such as Gigabit Ethernet, this provides access to a wide range of services without requiring specialized end-user equipment. However, such signals have a high laser power-bandwidth requirement which may not be a good fit to the domestic environment. Here we explore the use of low-power optical components in customer premises which interface with an intermediate optical network node. Two solutions in the context of SSMF over a CWDM optical network are described, based on either reflective or direct modulation. EVMs of better than 35 dB were achieved. ©2012 Optical Society of America

Towards a multiservice & multiformat optical home area networks

International audienceWe propose mid and long term visions of optical Home Area Networks. The challenge is not only to increase the network capacity, but also to take into account the heterogeneity of the signals to be conveyed: Ethernet, RF TV and radio signals for wireless-end-connectivity. Two solutions are described: a mid term solution, based on an active star and centered on a multiformat switch, and a long term solution based on a fully transparent infrastructure, associated with optical wavelength multiplexing. These solutions and the corresponding realized setups will be described and compared in terms of performances, flexibility and robustness to future evolutions

Ethernet - a survey on its fields of application

During the last decades, Ethernet progressively became the most widely used local area networking (LAN) technology. Apart from LAN installations, Ethernet became also attractive for many other fields of application, ranging from industry to avionics, telecommunication, and multimedia. The expanded application of this technology is mainly due to its significant assets like reduced cost, backward-compatibility, flexibility, and expandability. However, this new trend raises some problems concerning the services of the protocol and the requirements for each application. Therefore, specific adaptations prove essential to integrate this communication technology in each field of application. Our primary objective is to show how Ethernet has been enhanced to comply with the specific requirements of several application fields, particularly in transport, embedded and multimedia contexts. The paper first describes the common Ethernet LAN technology and highlights its main features. It reviews the most important specific Ethernet versions with respect to each application field’s requirements. Finally, we compare these different fields of application and we particularly focus on the fundamental concepts and the quality of service capabilities of each proposal

Performance comparison of transmitting jumbo frame on Windows and Linux System

IPv6 is the successor of IPv4, the current Internet Protocol that runs out its address. It offers some improvements including simpler header format and extension header resulting in faster transmission of IP packets. However, IPv6 is a network layer protocol that requires lower layer services. IP packets from the network layer pass to data link layer to be encapsulated by layer 2 headers and trailer to become frames. Ethernet is the most widely used data link layer protocol in the current network devices. The technology is always improved to support high speed transmission. However, from standard Ethernet until ten gigabit Ethernet, the size of MTU remains unchanged at 1500 Bytes. This prevents the network from gaining an optimum performance on transmitting IP packets and operating systems cannot take full advantage of the high-speed performance of Gigabit Ethernet. This research aims to implement the transmission of IPv6 packets using jumbo frame on a test-bed environment. The implementation can be used to justify the impact of jumbo frame on the network as well as operating systems performance. The results prove that the OS used on implementation of jumbo frame affects on the network performance. The highest percentage of increasing throughput is 33.6% when both sender and receiver are running Windows. The decreasing delay by 54.36% was happened when using Linux in sender and Windows in receiver

High-speed, in-band performance measurement instrumentation for next generation IP networks

Facilitating always-on instrumentation of Internet traffic for the purposes of performance measurement is crucial in order to enable accountability of resource usage and automated network control, management and optimisation. This has proven infeasible to date due to the lack of native measurement mechanisms that can form an integral part of the network‟s main forwarding operation. However, Internet Protocol version 6 (IPv6) specification enables the efficient encoding and processing of optional per-packet information as a native part of the network layer, and this constitutes a strong reason for IPv6 to be adopted as the ubiquitous next generation Internet transport. In this paper we present a very high-speed hardware implementation of in-line measurement, a truly native traffic instrumentation mechanism for the next generation Internet, which facilitates performance measurement of the actual data-carrying traffic at small timescales between two points in the network. This system is designed to operate as part of the routers' fast path and to incur an absolutely minimal impact on the network operation even while instrumenting traffic between the edges of very high capacity links. Our results show that the implementation can be easily accommodated by current FPGA technology, and real Internet traffic traces verify that the overhead incurred by instrumenting every packet over a 10 Gb/s operational backbone link carrying a typical workload is indeed negligible

Coal mine low power laser methane detection and alarm instrument

At present, the portable carrier catalytic methane detection and alarm instrument for coal mine generally has many problems, such as high power consumption, short standby time, low detection accuracy, few parameters and single function, which can not meet the rapid development needs of mine safety. In this paper, a low power portable laser methane detection and alarm instrument based on tunable laser absorption spectroscopy (TDLAS) is designed. The instrument can detect methane concentration, ambient temperature and ambient pressure at the same time. It has the functions of sound and light alarm, historical data storage and query, and integrates Wi-Fi to realize data wireless transmission. The instrument can work continuously for 36 hours, and the response time is less than 15 seconds. It has the function of self-diagnosis. The overall performance of the instrument has been greatly improved compared with the traditional mine methane portable instrument. A mobile methane alarm Internet of things(IOT) system for coal mine based on portable instrument has been developed, which realizes real-time upload of data and cloud analysis, makes the traditional mine gas monitoring and control system powerfully supplemented, greatly improves the detection level of coal mine gas, and has broad application prospects