An eco-friendly hybrid urban computing network combining community-based wireless LAN access and wireless sensor networking

Computer-enhanced smart environments, distributed environmental monitoring, wireless communication, energy conservation and sustainable technologies, ubiquitous access to Internet-located data and services, user mobility and innovation as a tool for service differentiation are all significant contemporary research subjects and societal developments. This position paper presents the design of a hybrid municipal network infrastructure that, to a lesser or greater degree, incorporates aspects from each of these topics by integrating a community-based Wi-Fi access network with Wireless Sensor Network (WSN) functionality. The former component provides free wireless Internet connectivity by harvesting the Internet subscriptions of city inhabitants. To minimize session interruptions for mobile clients, this subsystem incorporates technology that achieves (near-)seamless handover between Wi-Fi access points. The WSN component on the other hand renders it feasible to sense physical properties and to realize the Internet of Things (IoT) paradigm. This in turn scaffolds the development of value-added end-user applications that are consumable through the community-powered access network. The WSN subsystem invests substantially in ecological considerations by means of a green distributed reasoning framework and sensor middleware that collaboratively aim to minimize the network's global energy consumption. Via the discussion of two illustrative applications that are currently being developed as part of a concrete smart city deployment, we offer a taste of the myriad of innovative digital services in an extensive spectrum of application domains that is unlocked by the proposed platform

A Low Energy FPGA Platform for Real-Time Event-Based Control

We present a wireless sensor node suitable for event-based real-time control networks. The node achieves low-power operation thanks to tight clock synchronisation with the network master (at present we refer to a star network but extensions are envisaged). Also, the node does not employ any programmable device but rather an FPGA, thus being inherently immune to attacks based on code tampering. Experimental results on a simple laboratory apparatus are presented

A Structured Hardware/Software Architecture for Embedded Sensor Nodes

Owing to the limited requirement for sensor processing in early networked sensor nodes, embedded software was generally built around the communication stack. Modern sensor nodes have evolved to contain significant on-board functionality in addition to communications, including sensor processing, energy management, actuation and locationing. The embedded software for this functionality, however, is often implemented in the application layer of the communications stack, resulting in an unstructured, top-heavy and complex stack. In this paper, we propose an embedded system architecture to formally specify multiple interfaces on a sensor node. This architecture differs from existing solutions by providing a sensor node with multiple stacks (each stack implements a separate node function), all linked by a shared application layer. This establishes a structured platform for the formal design, specification and implementation of modern sensor and wireless sensor nodes. We describe a practical prototype of an intelligent sensing, energy-aware, sensor node that has been developed using this architecture, implementing stacks for communications, sensing and energy management. The structure and operation of the intelligent sensing and energy management stacks are described in detail. The proposed architecture promotes structured and modular design, allowing for efficient code reuse and being suitable for future generations of sensor nodes featuring interchangeable components

Survey of Inter-satellite Communication for Small Satellite Systems: Physical Layer to Network Layer View

Small satellite systems enable whole new class of missions for navigation, communications, remote sensing and scientific research for both civilian and military purposes. As individual spacecraft are limited by the size, mass and power constraints, mass-produced small satellites in large constellations or clusters could be useful in many science missions such as gravity mapping, tracking of forest fires, finding water resources, etc. Constellation of satellites provide improved spatial and temporal resolution of the target. Small satellite constellations contribute innovative applications by replacing a single asset with several very capable spacecraft which opens the door to new applications. With increasing levels of autonomy, there will be a need for remote communication networks to enable communication between spacecraft. These space based networks will need to configure and maintain dynamic routes, manage intermediate nodes, and reconfigure themselves to achieve mission objectives. Hence, inter-satellite communication is a key aspect when satellites fly in formation. In this paper, we present the various researches being conducted in the small satellite community for implementing inter-satellite communications based on the Open System Interconnection (OSI) model. This paper also reviews the various design parameters applicable to the first three layers of the OSI model, i.e., physical, data link and network layer. Based on the survey, we also present a comprehensive list of design parameters useful for achieving inter-satellite communications for multiple small satellite missions. Specific topics include proposed solutions for some of the challenges faced by small satellite systems, enabling operations using a network of small satellites, and some examples of small satellite missions involving formation flying aspects.Comment: 51 pages, 21 Figures, 11 Tables, accepted in IEEE Communications Surveys and Tutorial

Combining Wireless Sensor Networks and Semantic Middleware for an Internet of Things-Based Sportsman/Woman Monitoring Application.

Wireless Sensor Networks (WSNs) are spearheading the efforts taken to build and deploy systems aiming to accomplish the ultimate objectives of the Internet of Things. Due to the sensors WSNs nodes are provided with, and to their ubiquity and pervasive capabilities, these networks become extremely suitable for many applications that so-called conventional cabled or wireless networks are unable to handle. One of these still underdeveloped applications is monitoring physical parameters on a person. This is an especially interesting application regarding their age or activity, for any detected hazardous parameter can be notified not only to the monitored person as a warning, but also to any third party that may be helpful under critical circumstances, such as relatives or healthcare centers. We propose a system built to monitor a sportsman/woman during a workout session or performing a sport-related indoor activity. Sensors have been deployed by means of several nodes acting as the nodes of a WSN, along with a semantic middleware development used for hardware complexity abstraction purposes. The data extracted from the environment, combined with the information obtained from the user, will compose the basis of the services that can be obtained

Exploiting partial reconfiguration through PCIe for a microphone array network emulator

The current Microelectromechanical Systems (MEMS) technology enables the deployment of relatively low-cost wireless sensor networks composed of MEMS microphone arrays for accurate sound source localization. However, the evaluation and the selection of the most accurate and power-efficient network’s topology are not trivial when considering dynamic MEMS microphone arrays. Although software simulators are usually considered, they consist of high-computational intensive tasks, which require hours to days to be completed. In this paper, we present an FPGA-based platform to emulate a network of microphone arrays. Our platform provides a controlled simulated acoustic environment, able to evaluate the impact of different network configurations such as the number of microphones per array, the network’s topology, or the used detection method. Data fusion techniques, combining the data collected by each node, are used in this platform. The platform is designed to exploit the FPGA’s partial reconfiguration feature to increase the flexibility of the network emulator as well as to increase performance thanks to the use of the PCI-express high-bandwidth interface. On the one hand, the network emulator presents a higher flexibility by partially reconfiguring the nodes’ architecture in runtime. On the other hand, a set of strategies and heuristics to properly use partial reconfiguration allows the acceleration of the emulation by exploiting the execution parallelism. Several experiments are presented to demonstrate some of the capabilities of our platform and the benefits of using partial reconfiguration

Unsupervised Parkinson’s Disease Assessment

Parkinson’s Disease (PD) is a progressive neurological disease that affects 6.2 million people worldwide. The most popular clinical method to measure PD tremor severity is a standardized test called the Unified Parkinson’s Disease Rating Scale (UPDRS), which is performed subjectively by a medical professional. Due to infrequent checkups and human error introduced into the process, treatment is not optimally adjusted for PD patients. According to a recent review there are two devices recommended to objectively quantify PD symptom severity. Both devices record a patient’s tremors using inertial measurement units (IMUs). One is not currently available for over the counter purchases, as they are currently undergoing clinical trials. It has also been used in studies to evaluate to UPDRS scoring in home environments using an Android application to drive the tests. The other is an accessible product used by researchers to design home monitoring systems for PD tremors at home. Unfortunately, this product includes only the sensor and requires technical expertise and resources to set up the system. In this paper, we propose a low-cost and energy-efficient hybrid system that monitors a patient’s daily actions to quantify hand and finger tremors based on relevant UPDRS tests using IMUs and surface Electromyography (sEMG). This device can operate in a home or hospital environment and reduces the cost of evaluating UPDRS scores from both patient and the clinician’s perspectives. The system consists of a wearable device that collects data and wirelessly communicates with a local server that performs data analysis. The system does not require any choreographed actions so that there is no need for the user to follow any unwieldy peripheral. In order to avoid frequent battery replacement, we employ a very low-power wireless technology and optimize the software for energy efficiency. Each collected signal is filtered for motion classification, where the system determines what analysis methods best fit with each period of signals. The corresponding UPDRS algorithms are then used to analyze the signals and give a score to the patient. We explore six different machine learning algorithms to classify a patient’s actions into appropriate UPDRS tests. To verify the platform’s usability, we conducted several tests. We measured the accuracy of our main sensors by comparing them with a medically approved industry device. The our device and the industry device show similarities in measurements with errors acceptable for the large difference in cost. We tested the lifetime of the device to be 15.16 hours minimum assuming the device is constantly on. Our filters work reliably, demonstrating a high level of similarity to the expected data. Finally, the device is run through and end-to-end sequence, where we demonstrate that the platform can collect data and produce a score estimate for the medical professionals

Smart Navigation System for the Port of Seville

Las ponencias del congreso pueden descargarse desde: http://www.pianc.org.ar/_stage/papers_in.phpThis paper focuses in the development of an information platform for rivers and integrated navigation aid system in waterways. The proposed system will not only offer vessel traffic services (VTS) and other RIS basic services but also those advanced and customized services of interest for the Port of Seville. This system, eRIO, is being developed under the project TECNOPORT2025 which is initiative of the Port Authority of Seville, co-funded by the European Commission by means of the European Region Development Funds, under the Pre-commercial Public Procurement model aiming the “Port of Future”

Firefighter of the future

Tese de mestrado integrado. Engenharia Electrotécnica e de Computadores. Faculdade de Engenharia. Universidade do Porto. 201