A Platform for Proactive, Risk-Based Slope Asset Management, Phase II

INE/AUTC 15.0

Ground Profile Recovery from Aerial 3D LiDAR-based Maps

The paper presents the study and implementation of the ground detection methodology with filtration and removal of forest points from LiDAR-based 3D point cloud using the Cloth Simulation Filtering (CSF) algorithm. The methodology allows to recover a terrestrial relief and create a landscape map of a forestry region. As the proof-of-concept, we provided the outdoor flight experiment, launching a hexacopter under a mixed forestry region with sharp ground changes nearby Innopolis city (Russia), which demonstrated the encouraging results for both ground detection and methodology robustness.Comment: 8 pages, FRUCT-2019 conferenc

Sedimentological characterization of Antarctic moraines using UAVs and Structure-from-Motion photogrammetry

In glacial environments particle-size analysis of moraines provides insights into clast origin, transport history, depositional mechanism and processes of reworking. Traditional methods for grain-size classification are labour-intensive, physically intrusive and are limited to patch-scale (1m2) observation. We develop emerging, high-resolution ground- and unmanned aerial vehicle-based ‘Structure-from-Motion’ (UAV-SfM) photogrammetry to recover grain-size information across an moraine surface in the Heritage Range, Antarctica. SfM data products were benchmarked against equivalent datasets acquired using terrestrial laser scanning, and were found to be accurate to within 1.7 and 50mm for patch- and site-scale modelling, respectively. Grain-size distributions were obtained through digital grain classification, or ‘photo-sieving’, of patch-scale SfM orthoimagery. Photo-sieved distributions were accurate to <2mm compared to control distributions derived from dry sieving. A relationship between patch-scale median grain size and the standard deviation of local surface elevations was applied to a site-scale UAV-SfM model to facilitate upscaling and the production of a spatially continuous map of the median grain size across a 0.3 km2 area of moraine. This highly automated workflow for site scale sedimentological characterization eliminates much of the subjectivity associated with traditional methods and forms a sound basis for subsequent glaciological process interpretation and analysis

Predicting growing stock volume of Eucalyptus plantations using 3-D point clouds derived from UAV imagery and ALS data

Estimating forest inventory variables is important in monitoring forest resources and mitigating climate change. In this respect, forest managers require flexible, non-destructive methods for estimating volume and biomass. High-resolution and low-cost remote sensing data are increasingly available to measure three-dimensional (3D) canopy structure and to model forest structural attributes. The main objective of this study was to evaluate and compare the individual tree volume estimates derived from high-density point clouds obtained from airborne laser scanning (ALS) and digital aerial photogrammetry (DAP) in Eucalyptus spp. plantations. Object-based image analysis (OBIA) techniques were applied for individual tree crown (ITC) delineation. The ITC algorithm applied correctly detected and delineated 199 trees from ALS-derived data, while 192 trees were correctly identified using DAP-based point clouds acquired fromUnmannedAerialVehicles(UAV), representing accuracy levels of respectively 62% and 60%. Addressing volume modelling, non-linear regression fit based on individual tree height and individual crown area derived from the ITC provided the following results: Model E ciency (Mef) = 0.43 and 0.46, Root Mean Square Error (RMSE) = 0.030 m3 and 0.026 m3, rRMSE = 20.31% and 19.97%, and an approximately unbiased results (0.025 m3 and 0.0004 m3) using DAP and ALS-based estimations, respectively. No significant di erence was found between the observed value (field data) and volume estimation from ALS and DAP (p-value from t-test statistic = 0.99 and 0.98, respectively). The proposed approaches could also be used to estimate basal area or biomass stocks in Eucalyptus spp. plantationsinfo:eu-repo/semantics/publishedVersio

Airborne LiDAR for DEM generation: some critical issues

Airborne LiDAR is one of the most effective and reliable means of terrain data collection. Using LiDAR data for DEM generation is becoming a standard practice in spatial related areas. However, the effective processing of the raw LiDAR data and the generation of an efficient and high-quality DEM remain big challenges. This paper reviews the recent advances of airborne LiDAR systems and the use of LiDAR data for DEM generation, with special focus on LiDAR data filters, interpolation methods, DEM resolution, and LiDAR data reduction. Separating LiDAR points into ground and non-ground is the most critical and difficult step for DEM generation from LiDAR data. Commonly used and most recently developed LiDAR filtering methods are presented. Interpolation methods and choices of suitable interpolator and DEM resolution for LiDAR DEM generation are discussed in detail. In order to reduce the data redundancy and increase the efficiency in terms of storage and manipulation, LiDAR data reduction is required in the process of DEM generation. Feature specific elements such as breaklines contribute significantly to DEM quality. Therefore, data reduction should be conducted in such a way that critical elements are kept while less important elements are removed. Given the highdensity characteristic of LiDAR data, breaklines can be directly extracted from LiDAR data. Extraction of breaklines and integration of the breaklines into DEM generation are presented

Estimation of canopy structure and individual trees from laser scanning data

During the last fifteen years, laser scanning has emerged as a data source for forest inventory. Airborne laser scanning (ALS) provides 3D data, which may be used in an automated analysis chain to estimate vegetation properties for large areas. Terrestrial laser scanning (TLS) data are highly accurate 3D ground-based measurements, which may be used for detailed 3D modeling of vegetation elements. The objective of this thesis is to further develop methods to estimate forest information from laser scanning data. The aims are to estimate lists of individual trees from ALS data with accuracy comparable to area-based methods, to collect detailed field reference data using TLS, and to estimate canopy structure from ALS data. The studies were carried out in boreal and hemi-boreal forests in Sweden. Tree crowns were delineated in three dimensions with a model-based clustering approach. The model-based clustering identified more trees than delineation of a surface model, especially for small trees below the dominant tree layer. However, it also resulted in more erroneously delineated tree crowns. Individual trees were estimated with statistical methods from ALS data based on field-measured trees to obtain unbiased results at area level. The accuracy of the estimates was similar for delineation of a surface model (stem density root mean square error or RMSE 32.0%, bias 1.9%; stem volume RMSE 29.7%, bias 3.8%) as for model-based clustering (stem density RMSE 33.3%, bias 1.1%; stem volume RMSE 22.0%, bias 2.5%). Tree positions and stem diameters were estimated from TLS data with an automated method. Stem attributes were then estimated from ALS data trained with trees found from TLS data. The accuracy (diameter at breast height or DBH RMSE 15.4%; stem volume RMSE 34.0%) was almost the same as when trees from a manual field inventory were used as training data (DBH RMSE 15.1%; stem volume RMSE 34.5%). Canopy structure was estimated from discrete return and waveform ALS data. New models were developed based on the Beer-Lambert law to relate canopy volume to the fraction of laser light reaching the ground. Waveform ALS data (canopy volume RMSE 27.6%) described canopy structure better than discrete return ALS data (canopy volume RMSE 36.5%). The methods may be used to estimate canopy structure for large areas