Simulation of charge-trapping in nano-scale MOSFETs in the presence of random-dopants-induced variability

The growing variability of electrical characteristics is a major issue associated with continuous downscaling of contemporary bulk MOSFETs. In addition, the operating conditions brought about by these same scaling trends have pushed MOSFET degradation mechanisms such as Bias Temperature Instability (BTI) to the forefront as a critical reliability threat. This thesis investigates the impact of this ageing phenomena, in conjunction with device variability, on key MOSFET electrical parameters. A three-dimensional drift-diffusion approximation is adopted as the simulation approach in this work, with random dopant fluctuations—the dominant source of statistical variability—included in the simulations. The testbed device is a realistic 35 nm physical gate length n-channel conventional bulk MOSFET. 1000 microscopically different implementations of the transistor are simulated and subjected to charge-trapping at the oxide interface. The statistical simulations reveal relatively rare but very large threshold voltage shifts, with magnitudes over 3 times than that predicted by the conventional theoretical approach. The physical origin of this effect is investigated in terms of the electrostatic influences of the random dopants and trapped charges on the channel electron concentration. Simulations with progressively increased trapped charge densities—emulating the characteristic condition of BTI degradation—result in further variability of the threshold voltage distribution. Weak correlations of the order of 10-2 are found between the pre-degradation threshold voltage and post-degradation threshold voltage shift distributions. The importance of accounting for random dopant fluctuations in the simulations is emphasised in order to obtain qualitative agreement between simulation results and published experimental measurements. Finally, the information gained from these device-level physical simulations is integrated into statistical compact models, making the information available to circuit designers

Statistical compact model strategies for nano CMOS transistors subject of atomic scale variability

One of the major limiting factors of the CMOS device, circuit and system simulation in sub 100nm regimes is the statistical variability introduced by the discreteness of charge and granularity of matter. The statistical variability cannot be eliminated by tuning the layout or by tightening fabrication process control. Since the compact models are the key bridge between technology and design, it is necessary to transfer reliably the MOSFET statistical variability information into compact models to facilitate variability aware design practice. The aim of this project is the development of a statistical extraction methodology essential to capture statistical variability with optimum set of parameters particularly in industry standard compact model BSIM. This task is accomplished by using a detailed study on the sensitivity analysis of the transistor current in respect to key parameters in compact model in combination with error analysis of the fitted Id-Vg characteristics. The key point in the developed direct statistical compact model strategy is that the impacts of statistical variability can be captured in device characteristics by tuning a limited number of parameters and keeping the values for remaining major set equal to their default values obtained from the “uniform” MOSFET compact model extraction. However, the statistical compact model extraction strategies will accurately represent the distribution and correlation of the electrical MOSFET figures of merit. Statistical compact model parameters are generated using statistical parameter generation techniques such as uncorrelated parameter distributions, principal component analysis and nonlinear power method. The accuracy of these methods is evaluated in comparison with the results obtained from ‘atomistic’ simulations. The impact of the correlations in the compact model parameters has been analyzed along with the corresponding transistor figures of merit. The accuracy of the circuit simulations with different statistical compact model libraries has been studied. Moreover, the impact of the MOSFET width/length on the statistical trend of the optimum set of statistical compact model parameters and electrical figures of merit has been analyzed with two methods to capture geometry dependencies in proposed statistical models

Simulation study of scaling design, performance characterization, statistical variability and reliability of decananometer MOSFETs

This thesis describes a comprehensive, simulation based scaling study – including device design, performance characterization, and the impact of statistical variability – on deca-nanometer bulk MOSFETs. After careful calibration of fabrication processes and electrical characteristics for n- and p-MOSFETs with 35 nm physical gate length, 1 nm EOT and stress engineering, the simulated devices closely match the performance of contemporary 45 nm CMOS technologies. Scaling to 25 nm, 18 nm and 13 nm gate length n and p devices follows generalized scaling rules, augmented by physically realistic constraints and the introduction of high-k/metal-gate stacks. The scaled devices attain the performance stipulated by the ITRS. Device a.c. performance is analyzed, at device and circuit level. Extrinsic parasitics become critical to nano-CMOS device performance. The thesis describes device capacitance components, analyzes the CMOS inverter, and obtains new insights into the inverter propagation delay in nano-CMOS. The projection of a.c. performance of scaled devices is obtained. The statistical variability of electrical characteristics, due to intrinsic parameter fluctuation sources, in contemporary and scaled decananometer MOSFETs is systematically investigated for the first time. The statistical variability sources: random discrete dopants, gate line edge roughness and poly-silicon granularity are simulated, in combination, in an ensemble of microscopically different devices. An increasing trend in the standard deviation of the threshold voltage as a function of scaling is observed. The introduction of high-k/metal gates improves electrostatic integrity and slows this trend. Statistical evaluations of variability in Ion and Ioff as a function of scaling are also performed. For the first time, the impact of strain on statistical variability is studied. Gate line edge roughness results in areas of local channel shortening, accompanied by locally increased strain, both effects increasing the local current. Variations are observed in both the drive current, and in the drive current enhancement normally expected from the application of strain. In addition, the effects of shallow trench isolation (STI) on MOSFET performance and on its statistical variability are investigated for the first time. The inverse-narrow-width effect of STI enhances the current density adjacent to it. This leads to a local enhancement of the influence of junction shapes adjacent to the STI. There is also a statistical impact on the threshold voltage due to random STI induced traps at the silicon/oxide interface

Intrinsic variability of nanoscale CMOS technology for logic and memory.

The continuous downscaling of CMOS technology, the main engine of development of the semiconductor Industry, is limited by factors that become important for nanoscale device size, which undermine proper device operation completely offset gains from scaling. One of the main problems is device variability: nominally identical devices are different at the microscopic level due to fabrication tolerance and the intrinsic granularity of matter. For this reason, structures, devices and materials for the next technology nodes will be chosen for their robustness to process variability, in agreement with the ITRS (International Technology Roadmap for Semiconductors). Examining the dispersion of various physical and geometrical parameters and the effect these have on device performance becomes necessary. In this thesis, I focus on the study of the dispersion of the threshold voltage due to intrinsic variability in nanoscale CMOS technology for logic and for memory. In order to describe this, it is convenient to have an analytical model that allows, with the assistance of a small number of simulations, to calculate the standard deviation of the threshold voltage due to the various contributions

Large-scale simulations of intrinsic parameter fluctuations in nano-scale MOSFETs

Intrinsic parameter fluctuations have become a serious obstacle to the continued scaling of MOSFET devices, particularly in the sub-100 nm regime. The increase in intrinsic parameter fluctuations means that simulations on a statistical scale are necessary to capture device parameter distributions. In this work, large-scale simulations of samples of 100,000s of devices are carried out in order to accurately characterise statistical variability of the threshold voltage in a real 35 nm MOSFET. Simulations were performed for the two dominant sources of statistical variability – random discrete dopants (RDD) and line edge roughness (LER). In total ∼400,000 devices have been simulated, taking approximately 500,000 CPU hours (60 CPU years). The results reveal the true shape of the distribution of threshold voltage, which is shown to be positively skewed for random dopants and negatively skewed for line edge roughness. Through further statistical analysis and data mining, techniques for reconstructing the distributions of the threshold voltage are developed. By using these techniques, methods are demonstrated that allow statistical enhancement of random dopant and line edge roughness simulations, thereby reducing the computational expense necessary to accurately characterise their effects. The accuracy of these techniques is analysed and they are further verified against scaled and alternative device architectures. The combined effects of RDD and LER are also investigated and it is demonstrated that the statistical combination of the individual RDD and LER-induced distributions of threshold voltage closely matches that obtained from simulations. By applying the statistical enhancement techniques developed for RDD and LER, it is shown that the computational cost of characterising their effects can be reduced by 1–2 orders of magnitude

Gate leakage variability in nano-CMOS transistors

Gate leakage variability in nano-scale CMOS devices is investigated through advanced modelling and simulations of planar, bulk-type MOSFETs. The motivation for the work stems from the two of the most challenging issues in front of the semiconductor industry - excessive leakage power, and device variability - both being brought about with the aggressive downscaling of device dimensions to the nanometer scale. The aim is to deliver a comprehensive tool for the assessment of gate leakage variability in realistic nano-scale CMOS transistors. We adopt a 3D drift-diffusion device simulation approach with density-gradient quantum corrections, as the most established framework for the study of device variability. The simulator is first extended to model the direct tunnelling of electrons through the gate dielectric, by means of an improved WKB approximation. A study of a 25 nm square gate n-type MOSFET demonstrates that combined effect of discrete random dopants and oxide thickness variation lead to starndard deviation of up to 50% (10%) of the mean gate leakage current in OFF(ON)-state of the transistor. There is also a 5 to 6 times increase of the magnitude of the gate current, compared to that simulated of a uniform device. A significant part of the research is dedicated to the analysis of the non-abrupt bandgap and permittivity transition at the Si/SiO2 interface. One dimensional simulation of a MOS inversion layer with a 1nm SiO2 insulator and realistic band-gap transition reveals a strong impact on subband quantisation (over 50mV reduction in the delta-valley splitting and over 20% redistribution of carriers from the delta-2 to the delta-4 valleys), and enhancement of capacitance (over 10%) and leakage (about 10 times), relative to simulations with an abrupt band-edge transition at the interface

CMOS Characterization, Modeling, and Circuit Design in the Presence of Random Local Variation

Random local variation in CMOS transistors complicates characterization procedures, modeling efforts, simulation tools, and circuit design methodologies in highly scaled CMOS devices. Mismatch is not only a concern for closely matched device pairs in analog circuits; digital circuit designers also have to consider the effects of random variation. Device characterization, modeling, process development, and circuit design engineers have to work together to mitigate the impact of random local variation. This thesis outlines the primary challenges of CMOS characterization, modeling, and circuit design in the presence of random local variation and offers guidelines and solutions to help mitigate and model the unique characteristics that mismatch introduces. Random data sets are generated to demonstrate the statistical transistor and circuit response to random variation across die and process and to demonstrate the challenges in each area of CMOS development

Statistical modelling of nano CMOS transistors with surface potential compact model PSP

The development of a statistical compact model strategy for nano-scale CMOS transistors is presented in this thesis. Statistical variability which arises from the discreteness of charge and granularity of matter plays an important role in scaling of nano CMOS transistors especially in sub 50nm technology nodes. In order to achieve reasonable performance and yield in contemporary CMOS designs, the statistical variability that affects the circuit/system performance and yield must be accurately represented by the industry standard compact models. As a starting point, predictive 3D simulation of an ensemble of 1000 microscopically different 35nm gate length transistors is carried out to characterize the impact of statistical variability on the device characteristics. PSP, an advanced surface potential compact model that is selected as the next generation industry standard compact model, is targeted in this study. There are two challenges in development of a statistical compact model strategy. The first challenge is related to the selection of a small subset of statistical compact model parameters from the large number of compact model parameters. We propose a strategy to select 7 parameters from PSP to capture the impact of statistical variability on current-voltage characteristics. These 7 parameters are used in statistical parameter extraction with an average RMS error of less than 2.5% crossing the whole operation region of the simulated transistors. Moreover, the accuracy of statistical compact model extraction strategy in reproducing the MOSFET electrical figures of merit is studied in detail. The results of the statistical compact model extraction are used for statistical circuit simulation of a CMOS inverter under different input-output conditions and different number of statistical parameters. The second challenge in the development of statistical compact model strategy is associated with statistical generation of parameters preserving the distribution and correlation of the directly extracted parameters. By using advanced statistical methods such as principal component analysis and nonlinear power method, the accuracy of parameter generation is evaluated and compared to directly extracted parameter sets. Finally, an extension of the PSP statistical compact model strategy to different channel width/length devices is presented. The statistical trends of parameters and figures of merit versus channel width/length are characterized

A novel deep submicron bulk planar sizing strategy for low energy subthreshold standard cell libraries

Engineering andPhysical Science ResearchCouncil (EPSRC) and Arm Ltd for providing funding in the form of grants and studentshipsThis work investigates bulk planar deep submicron semiconductor physics in an attempt to improve standard cell libraries aimed at operation in the subthreshold regime and in Ultra Wide Dynamic Voltage Scaling schemes. The current state of research in the field is examined, with particular emphasis on how subthreshold physical effects degrade robustness, variability and performance. How prevalent these physical effects are in a commercial 65nm library is then investigated by extensive modeling of a BSIM4.5 compact model. Three distinct sizing strategies emerge, cells of each strategy are laid out and post-layout parasitically extracted models simulated to determine the advantages/disadvantages of each. Full custom ring oscillators are designed and manufactured. Measured results reveal a close correlation with the simulated results, with frequency improvements of up to 2.75X/2.43X obs erved for RVT/LVT devices respectively. The experiment provides the first silicon evidence of the improvement capability of the Inverse Narrow Width Effect over a wide supply voltage range, as well as a mechanism of additional temperature stability in the subthreshold regime. A novel sizing strategy is proposed and pursued to determine whether it is able to produce a superior complex circuit design using a commercial digital synthesis flow. Two 128 bit AES cores are synthesized from the novel sizing strategy and compared against a third AES core synthesized from a state-of-the-art subthreshold standard cell library used by ARM. Results show improvements in energy-per-cycle of up to 27.3% and frequency improvements of up to 10.25X. The novel subthreshold sizing strategy proves superior over a temperature range of 0 °C to 85 °C with a nominal (20 °C) improvement in energy-per-cycle of 24% and frequency improvement of 8.65X. A comparison to prior art is then performed. Valid cases are presented where the proposed sizing strategy would be a candidate to produce superior subthreshold circuits