Design of RF Self-interference Cancellation Circuit for 100-W Full-Duplex Radio at 225-400 MHz

The full-duplex (FD) technology enables future military radios to simultaneously transmit and receive (STAR) on the same and adjacent frequencies. This enhances spectral efficiency and makes simultaneous integrated tactical communications and electronic warfare operations possible as opposed to the current time- or frequency-division radios used in military applications. The main challenge in implementing full-duplex radios is the strong self-interference (SI) between the transmitter and the receiver requiring solutions how to cancel the coupling, which has been largely resolved at higher ultra high frequency (UHF) bands for low power transmission. This paper presents a radio-frequency SI cancellation circuit suitable especially for very high-power military applications at military-relevant lower UHF band (225-400 MHz). The circuit couples power from the transmitter and tunes the phase and amplitude of the signal to destructively combine with the received SI, and thus isolates the receiver and transmitter. The paper introduces a concept consisting of a 90° vector modulator and switchable delay lines for a low-loss and high-power-handling cancellation circuit that enables operation with very-high transmit powers of even up to 1 kW.acceptedVersionPeer reviewe

Architectures, Antennas and Circuits for Millimeter-wave Wireless Full-Duplex Applications

Demand for wireless network capacity keeps growing exponentially every year, as a result a 1000-fold increase in data traffic is projected over the next 10 years in the context of 5G wireless networks. Solutions for delivering the 1000-fold increase in capacity fall into three main categories: deploying smaller cells, allocating more spectrum and improving spectral efficiency of wireless systems. Smaller cells at RF frequencies (1-6GHz) are unlikely to deliver the demanded capacity increase. On the other hand, millimeter-wave spectrum (frequencies over 24GHz) offers wider, multi-GHz channel bandwidths, and therefore has gained significant research interest as one of the most promising solutions to address the data traffic demands of 5G. Another disruptive technology is full-duplex which breaks a century-old assumption in wireless communication, by simultaneous transmission and reception on the same frequency channel. In doing so, full-duplex offers many benefits for wireless networks, including an immediate spectral efficiency improvement in the physical layer. Although FD promises great benefits, self-interference from the transmitter to its own receiver poses a fundamental challenge. The self-interference can be more than a billion times stronger than the desired signal and must be suppressed below the receiver noise floor. In recent years, there has been some research efforts on fully-integrated full-duplex RF transceivers, but mm-wave fully-integrated full-duplex systems, are still in their infancy. This dissertation presents novel architectures, antenna and circuit techniques to merge two exciting technologies, mm-wave and full-duplex, which can potentially offer the dual benefits of wide bandwidths and improved spectral efficiency. To this end, two different antenna interfaces, namely a wideband reconfigurable T/R antenna pair with polarization-based antenna cancellation and an mm-wave fully-integrated magnetic-free non-reciprocal circulator, are presented. The polarization-based antenna cancellation is employed in conjunction with the RF and digital cancellation to design a 60GHz full-duplex 45nm SOI CMOS transceiver with nearly 80dB self-interference suppression. The concepts and prototypes presented in this dissertation have also profound implications for emerging applications such as vehicular radars, 5G small-cell base-stations and virtual reality

On the Prospects of In-band Full-Duplex Radios as Monostatic Continuous-Wave Noise Radars

Future full-duplex (FD) radios simultaneously transmit and receive (STAR) on the same frequency band. This improves spectral efficiency and enables multiple new applications in the military context. One of such applications is the use of FD technology for a continuous-wave (CW) monostatic noise radar in which a wideband noise-like waveform is simultaneously transmitted and received. The main challenge in full-duplex communication systems is the strong self-interference (SI), i.e., direct leakage, between the transmitter and the receiver. In a noise radar, this problem is even more challenging as the required bandwidth is wider and transmit power levels are higher than in typical communications applications. This paper explores the feasibility of applying current full-duplex radio technology for a noise radar, targeting a system with a bandwidth of 500 MHz and transmit power in the kilowatt range. This is challenging compared to typical 5 to 80 MHz bandwidths and 0.1 to 2 W transmit powers supported previously in FD demonstrators. The obtainable SI suppression levels are estimated in terms of passive antenna isolation, analog cancellation and digital cancellation. In addition, the effect and tolerance of very-near environmental reflections are studied. It is concluded that, while high enough SI cancellation for a noise radar is feasible using state-of-the-art technology, the available transmit power limits performance.acceptedVersionPeer reviewe

Analysis and Design of Joint Communication and Sensing for Wireless Cellular Networks

Joint communication and sensing (JCAS) has emerged as an important piece of technology that will radically change ordinary wireless communication and radar systems. This research area, which has significantly grown over the last decade, aims to develop integrated systems that can provide both communication and sensing/radar functionalities simultaneously. The convergence of both systems into the same joint platform facilitates a more efficient use of the hardware and spectrum resources, enabling new civilian and professional applications. This thesis focuses on the integration of JCAS functionalities into mobile cellular networks, such as fifth-generation new radio (5G NR) and sixth generation (6G) communication systems, which are developing toward higher frequency ranges at millimeter-wave (mm-wave) bands, coming with wider bandwidths, and have massive antenna arrays, providing a great framework to develop sensing functionalities. By implementing JCAS, the different nodes of the cellular network, such as the base station and user equipment, can sense and reconstruct their surroundings. However, the JCAS operation yields multiple design challenges that need to be addressed. To this end, this thesis aims to develop novel algorithms in two relevant research areas that comprise self-interference (SI) cancellation and beamforming optimization techniques for JCAS systems. This work analyzes the potential sensing performance of mobile cellular networks, proposing a joint framework and identifying the main radar processing techniques to support JCAS. The fundamental SI challenge stemming from the simultaneous operation of the transmitter and receiver is investigated, and different JCAS cancellation techniques are proposed. The performance and feasibility of the proposed JCAS system is evaluated through simulation and measurement experiments at different frequency bands and scenarios, identifying mm-wave frequencies as the key enabler for future JCAS systems. Alternative antenna architectures and beamforming methods for mm-wave JCAS platforms are proposed by considering both communication and sensing requirements. Specifically, this thesis proposes novel beamforming methods that provide multiple beams, supporting efficient beamformed communications while an additional beam senses the environment simultaneously. In addition, the proposed beam-forming algorithms address the SI challenge by implementing an efficient spatial suppression scheme to suppress the direct transmitter–receiver coupling

Performance evaluation of currently available VLSI implementations satisfying U-interface requirements for an ISDN in South Africa.

A project report submitted to the Faculty of Engineering, University of the Witwatersrand, Johannesburg, in partial fulfilment of the requirements for the degree of Master of Science in Engineering.This project report examines the performance of three VLSI U-interface implementations satisfying the requirements of Basic Access on an ISDN. The systems evaluated are the Intel 89120,Siemens PEB2090 and STC DSP144, operating on 2BIQ, MMS4J and SU32 line codes respectively. Before evaluating the three abovementioned systems, a review of the underlying principles of U-interface technology is presented. Included in the review are aspects of transmission line theory, line coding, echo-cancellation, decision feedback equalisation, and pulse density modulation. The functional specifications of the three systems are then presented followed by a practical evaluation of each system. As an aid to testing the transmission systems, an evaluation board has been designed and built. The latter provides the necessary functionality to correctly activate each system, as well as the appropriate interfacing requirements for the error-rate tester. The U-interface transmission systems are evaluated on a number of test-loops, comprising sections of cable varying in length and gauge. Additionally, impairments are injected into data-carrying cables, in order to test the performance of each system in the presence of noise. The results of each test are recorded and analysed. Finally, a recommendation is made in favour of the 2BIQ U-interface. It is shown to offer superior transmission performance, at the expense of a slightly higher transmit-power level.Andrew Chakane 201

Fully-Integrated Magnetic-Free Nonreciprocal Components by Breaking Lorentz Reciprocity: from Physics to Applications

Reciprocity is a fundamental physical precept that governs wave propagation in a wide variety of physical domains. The various reciprocity theorems state that the response of a system remains unchanged if the excitation source and the measuring point are interchanged within a medium, and are closely related to the concept of time reversal symmetry in physics. Lorentz reciprocity is a fundamental characteristic of linear, time-invariant electronic and photonic structures with symmetric permittivity and permeability tensors. However, breaking reciprocity enables the realization of nonreciprocal components, such as isolators and circulators, which are critical to electronic, optical and acoustic systems, as well as new functionalities and devices based on novel wave propagation modes. Nonreciprocal components have traditionally relied on magnetic materials such as ferrites that lose reciprocity under the application of an external magnetic field through the Faraday Effect. The need for a magnetic bias limits the applicability of such approaches in small-form-factor Complementary Metal–Oxide–Semiconductor (CMOS)-compatible integrated devices. One of the main features of CMOS technology is the availability of high-speed transistor switches which can be turned ON and OFF, modulating the conductance of the medium. In this dissertation, a novel approach to break Lorentz reciprocity is presented based on staggered commutation in Linear Periodically-Time-Varying (LPTV) circuits. We have demonstrated the world’s first CMOS passive magnetic-free nonreciprocal circulator through spatio-temporal conductivity modulation. Since conductivity in semiconductors can be modulated over a wide range (CMOS transistor ON/OFF conductance ratio at Radio Frequency (RF)/millimeter-wave frequencies is as high as 103-105), commutated LPTV networks break reciprocity within a deeply sub-wavelength form-factor with low loss and high linearity. The resulting nonreciprocal components find application in antenna interfaces of wireless communication systems, connecting the Transmitter (TX) and the Receiver (RX) to a shared antenna. This is particularly important for full-duplex wireless, where the TX and the RX operate simultaneously at the same frequency band and need to be highly isolated in order to maintain receiver sensitivity. Multiple fully-integrated full-duplex receivers are demonstrated in this dissertation that best show the synergy between the physical concept and application-based implementations by using circuit techniques to benefit the system-level performance, such as TX-side linearity enhancement and co-design and co-optimization of the antenna interface and the RX and utilization of the multi-phase structure of our antenna interfaces for analog beamforming in multi-antenna systems. Finally, this dissertation discusses some of the fundamental limits of space-time modulated nonreciprocal structures, as well as new directions to build nonreciprocal components which can ideally be infinitesimal in size. A novel family of inductor-less nonreciprocal components including circulators and isolators have been demonstrated that achieve a wide tuning range in an infinitesimal form-factor. This family of devices combine reciprocal and nonreciprocal modes of operation, through the transfer properties of fundamental and harmonics of the system and enable a wide variety of functionalities

Surpassing Fundamental Limits through Time Varying Electromagnetics

Surpassing the fundamental limits that govern all electromagnetic structures, such as reciprocity and the delay-bandwidth-size limit, will have a transformative impact on all applications based on electromagnetic circuits and systems. For instance, violating principles of reciprocity enables non-reciprocal components such as isolators and circulators, which find application in full-duplex wireless radios, radar, biomedical imaging, and quantum computing systems. Overcoming the delay-bandwidth-size limit enables ultra-broadband yet extremely-compact devices whose size is not fundamentally related to the wavelength at the operating frequency. The focus of this dissertation is on using time-variance as a new toolbox to overcome these fundamental limits and re-imagine circuit and system design. Traditional non-reciprocal components are realized using ferrite materials that loose their reciprocity under the application of external magnetic bias. However, the sheer volume, cost and weight of these magnet based non-reciprocal components coupled with their inability to be fabricated in conventional semiconductor processes, have limited their application to bulky and large-scale systems. Other approaches such as active-biased and non-linearity based non-reciprocity are compatible with semiconductor processes, however, they suffer from other poor linearity and noise performance. In this dissertation, using passive transistor switch as the modulating element, we have proposed the concept of spatio-temporal conductivity modulation and have demonstrated a gamut of non-reciprocal devices ranging from gyrators to isolators and circulators. Through novel circuit topologies, for the first time, we have demonstrated on-chip circulators with multi-watt input power handling, operation at high millimeter-wave frequencies, and tailor made circulators for emerging technologies such as simultaneous-transmit-and-receive MRI and quantum computing. Delay-bandwidth-size trade-off is another fundamental electromagnetic limit, that constrains the delay imparted by a medium or a device within a fixed footprint to be inversely proportional to the signal bandwidth. It is this limit that governs the size of any microwave passive devices to be inversely proportional to its operating frequency. As a part of this dissertation, through intelligent clocking of switched capacitor networks we overcame the delay-bandwidth-size limit, thus resulting in infinitesimal, yet broadband microwave devices. Here we proposed a new paradigm in wave propagation where the properties such as the propagation delay and characteristic impedance does not depend on the constituent elements/materials of the medium, but rather heavily rely on the user-defined modulation scheme, thereby opening huge opportunities for realizing highly-reconfigurable passives. Leveraging these concepts, we demonstrated wide range of reciprocal an non-reciprocal devices including ultra-compact delay elements, highly-reconfigurable microwave passives, ultra-wideband circulators with infinitesimal form-factors and dispersion-free chip scale floquet topological insulators. Application of these devices have also been evaluated in real-world systems through our demonstrations of wideband, full-duplex receivers leveraging switched capacitors based true-time-delay interference cancelers and floquet topological insulator based antenna interfaces for full-duplex phased-arrays and ultra-wideband beamformers. Furthermore, to cater the growing RF and microwave needs of future, large-scale quantum computing systems, we demonstrated a low-cryogenic, wideband circulator based on time modulation of superconducting devices. This superconducting circulator is expected to operate alongside the superconducting qubits, inside a dilution refrigerator at 10mK-100mK, thus enabling a tightly integrated quantum system. We also presented the design and implementation of a cryogenic-CMOS clock driver chip that will generate the clocks required by the superconducting circulator. Finally, we also demonstrated the design and implementation of a low-noise, low power consumption, 6GHz - 8GHz cryogenic downconversion receiver at 4K for cryogenic qubit readout

Proceedings of the Fifth International Mobile Satellite Conference 1997

Satellite-based mobile communications systems provide voice and data communications to users over a vast geographic area. The users may communicate via mobile or hand-held terminals, which may also provide access to terrestrial communications services. While previous International Mobile Satellite Conferences have concentrated on technical advances and the increasing worldwide commercial activities, this conference focuses on the next generation of mobile satellite services. The approximately 80 papers included here cover sessions in the following areas: networking and protocols; code division multiple access technologies; demand, economics and technology issues; current and planned systems; propagation; terminal technology; modulation and coding advances; spacecraft technology; advanced systems; and applications and experiments