A Compact Reconfigurable Multi-mode Resonator-based Multi-band Band Pass Filter for Intelligent Transportation Systems Applications

A compact wide band reconfigurable bandpass filter (BPF) which utilises a hemi-circular flower shaped multimode resonator (MMR) is presented. The proposed MMR provides three resonant modes which fall within the broad frequency spectra. Among these, two modes are even and one is odd. These modes are optimised by varying the dimensions so as to obtain the desired frequency response. The fractional bandwidth is more than 96 per cent. The filter can be operated as multi-band BPF. In OFF condition of ‘Pin’ diode, the centre frequencies are 2.43 GHz, 3.5 GHz, and 5.9 GHz in ON condition of ‘Pin’ diode centre frequencies are 2.43 GHz, 3.5 GHz, 5.9 GHz, 6.5 GHz, and 8.8 GHz which are used for vehicular, WiMAX, intelligent transportation systems and satellite communication respectively. Microstrip filter structures are integrated with ‘Pin’ diodes. Appropriate biasing has been provided by choosing lumped components with precise values. The insertion loss in OFF condition are 0.5 dB, 0.67 dB, and 0.8 dB and in ON condition 0.5 dB, 0.7 dB, 1.2 dB, and 1.9 dB. The measured results agree well with the full-wave simulated results

Multi mode Resonator based Concurrent Triple band Band pass Filter with Six Transmission Zeros for Defence Intelligent Transportation Systems Application

A compact and highly selective triple-band bandpass filter (BPF) is designed and presented in this paper. Proposed filter offers low insertion loss, and passband characteristics is achieved by using two coupled MMR multi-mode resonators (MMR1 and MMR2) and an inverted T and circular shape MMRs. The filter operates at frequency 2.43 GHz (Vehicular Communication), 5.91 GHz (ITS band), and 8.86 GHz (satellite communication band). The simulation and measurement results show a minimum insertion loss of 1.6 dB, 0.73 dB, and 2.8 dB for triple-band BPF. The return loss is found to be greater than 13.06 dB, 28.6 dB, and 21.55 dB. It is noted that measurement results are in accordance with the result of electromagnetic simulation. Desired triple-band multi-mode resonators (MMRs) filter characteristics are achieved with six transmission zeroes (TZs). The filter comprises of MMRs which provide small size and control over the spurious frequency. By using a parallel-coupled microstrip line, the first and third passbands are realised. Whereas by using an end-coupled microstrip line, the second passband is recognised. At the input and output ports, the resonator coupling technique is used. By using the anti-parallel microstrip line arrangement, the transmission zero is acquired. The dimensions of the designed filter are 25×16 mm 2

Novel and Compact Reconfigurable Antennas for Future Wireless Applications

PhDThe development of reconfigurable antennas is considered to be very promising in modern and future communication systems. Reconfigurable antennas have made use of many reconfiguration techniques that are centred upon switching mechanisms such as p-i-n diodes or MEMS. Other techniques such as optical switches, mechanical structure changing or the ability to change the permeability or permittivity of smart substrate materials have also been used. Reconfigurable antennas have created new horizons for many types of applications especially in Cognitive Radio, Multiple Input Multiple Output Systems, personal communication systems, satellites and many other applications. Cognitive Radio is one of the potential wireless applications that may place severe demands on RF systems designers and particularly antenna designers, when it comes to providing exible radio front-ends capable of achieving the set objectives of the technology. The aim of this work is to investigate possible roles that different categories of reconfigurable antenna can play in cognitive and smart radio. Hence, the research described in this thesis focuses on investigating some novel methods to frequency-reconfigure compact ultra-wideband antennas to work in different bands; this will offer additional filtering to the radio front-end. In the ultra-wideband mode, the antenna senses the spectrum for available bands with less congestion and interference and hence decides on the most suitable part to be reconfigured to, allowing reliable and efficient communication links between the radio devices. Ultra-wideband antenna with reconfigurable integrated notch capability is also demonstrated to provide further enhancement to interference rejection and improve the overall communication link. Furthermore, the design of novel pattern and polarisation reconfigurable antennas will be also investigated to assist Cognitive Radio through spatial rather than frequency means. An ultimate target for this research is to combine different degrees of reconfiguration into one compact, state of the art antenna design that meets the growing demand of cognitive and smart radio devices for more intelligent and multi-functional wireless devices within the personal area network domains and beyond

UWB Technology

Ultra Wide Band (UWB) technology has attracted increasing interest and there is a growing demand for UWB for several applications and scenarios. The unlicensed use of the UWB spectrum has been regulated by the Federal Communications Commission (FCC) since the early 2000s. The main concern in designing UWB circuits is to consider the assigned bandwidth and the low power permitted for transmission. This makes UWB circuit design a challenging mission in today's community. Various circuit designs and system implementations are published in this book to give the reader a glimpse of the state-of-the-art examples in this field. The book starts at the circuit level design of major UWB elements such as filters, antennas, and amplifiers; and ends with the complete system implementation using such modules

A Novice Approach of Designing CMOS Based Switchable Filters for ASP Applications

A switchable filter can be designed and fabricated with the desired range and parameters, materials say quartz substrate for RF MEMS based applications. The mathematical modeling of the resonators using the desired characteristics of the capacitive coupled filters can be implemented with low insertion loss. In order to design this filter, one can employ a PIN diode along with a semi-lumped resonator. This PIN diode has been used so as it performs the function of electronic switching i.e. the activating and deactivating the filter circuit action without any compromise in the overall performance of the circuit. These filters circuit are designed and implemented in a way so that it can accommodate the external quality factor in order to ensure a good impedance match at each band of operation. The most dominant parameters and characteristics of the second order switchable filter realization. In this work, the author has put an effort to discuss the most desired parameters of the various switchable filters. In these filter circuits, CMOS devices has been used to design because of their well accepted features i.e. low power loss and requirement of low input signal for operation in addition to other ones. The performance of the proposed CMOS based switchable filters has been discussed with its simulated results that have been carried out by using pSpice software with 0.18 micron technology. The insertion loss of this circuit is with the acceptable limits i.e. 2.9 dB and a tenability within two desired frequencies

Development of tunable and miniature microwave filters for modern wireless communications

Due to the increasing demand for new wireless services and applications, the high level of integration and the coexistence of multi-standard (MS) or multi-band operations into a single device are becoming defining trends in designing microwave filters. This has driven considerable technological advances in reconfigurable/tunable and miniaturized filters. More specifically, reconfigurable/tunable filters that tune to different frequency bands instead of classical filter banks have great potential to significantly reduce the system size and complexity; while reducing the filter size becomes essential to achieve the highest degree of integration density in compact and portable wireless devices. In the light of this scenario, the objective of this dissertation is to develop the new design technologies, concepts and filtering configurations for tunable microstrip filters and compact passive microwave filters. To this aim, this dissertation is divided into two main parts. The first part (Part I) focuses on the designs of novel varactor-tuned microstrip filters with advanced performances. In this aspect, new topologies for realizing tunable lowpass and highpass filters are firstly developed. State-of-the-art performances, including wide tuning range, high selectivity with multiple transmission zeros, low insertion loss and compact size for all the tuning states are obtained in both of these filters. Secondly, two novel classes of tunable bandpass filters are presented. One of them is designed based on varactor-loaded parallel-coupled microstrip lines (PCML) and short-circuited stubs, which allows the lower passband edge together with two transmission zeros located around the lower passband skirt to be reconfigured separately. While the other tunable bandpass filter is constructed by the combination of tunable bandpass and lowpass filters, featuring both centre frequency and bandwidth tunabilities, as well as high selectivity with abundant transmission zeros. Furthermore, a new concept of tunable lossy filter is demonstrated, which attempts to achieve an equivalent high-Q tunable performance by using low-Q resonators. This concept makes the presented tunable combline filter interesting for some frequency-agile applications in which the low in-band loss variation and high selectivity are much desired while the absolute insertion loss can be a tradeoff. The second part (Part II) is devoted to the design of miniaturized passive microwave filters with improved characteristics. For this, the concept of artificial right-handed and left-handed transmission lines are applied to the signal interference filtering topology, which results in a compact circuit size and good out-of-band performance. In particular, for a further size reduction, such filter is implemented in the forms of multilayered structure by using liquid crystal polymer (LCP) technology. Additionally, another two types of miniaturized bandpass filters using stepped impedance resonators are demonstrated, which are implemented based on different fabrication processes (i.e. LCP bonded multilayer PCB technology and a standard planar PCB technology). Among their main features, the compact size, wide passband, broad stopband with multiple transmission zeros and circuit simplicity are highlighted. For all the proposed design techniques and filtering structures, exhaustive theoretical analyses are done, and design equations and guide rules are provided. Furthermore, all the proposed schemes and/or ideas have been experimentally validated through the design, implementation and measurement of different filters. The fabrication processes of multilayer technology utilized: liquid crystal polymer (LCP) technology and liquid crystal polymer (LCP) bonded multilayer printed circuit board (PCB) technology, are also demonstrated for reference. All of the results achieved in this dissertation make the proposed filters very attractive for their use in modern wireless communication systems

Development of turnable and miniature microwave filters for modern wireless communication

Due to the increasing demand for new wireless services and applications, the high level of integration and the coexistence of multi-standard (MS) or multi-band operations into a single device are becoming defining trends in designing microwave filters. This has driven considerable technological advances in reconfigurable/tunable and miniaturized filters. More specifically, reconfigurable/tunable filters that tune to different frequency bands instead of classical filter banks have great potential to significantly reduce the system size and complexity; while reducing the filter size becomes essential to achieve the highest degree of integration density in compact and portable wireless devices. In the light of this scenario, the objective of this dissertation is to develop the new design technologies, concepts and filtering configurations for tunable microstrip filters and compact passive microwave filters. To this aim, this dissertation is divided into two main parts. The first part (Part I) focuses on the designs of novel varactor-tuned microstrip filters with advanced performances. In this aspect, new topologies for realizing tunable lowpass and highpass filters are firstly developed. State-of-the-art performances, including wide tuning range, high selectivity with multiple transmission zeros, low insertion loss and compact size for all the tuning states are obtained in both of these filters. Secondly, two novel classes of tunable bandpass filters are presented. One of them is designed based on varactor-loaded parallel-coupled microstrip lines (PCML) and short-circuited stubs, which allows the lower passband edge together with two transmission zeros located around the lower passband skirt to be reconfigured separately. While the other tunable bandpass filter is iii constructed by the combination of tunable bandpass and lowpass filters, featuring both centre frequency and bandwidth tunabilities, as well as high selectivity with abundant transmission zeros. Furthermore, a new concept of tunable lossy filter is demonstrated, which attempts to achieve an equivalent high-Q tunable performance by using low-Q resonators. This concept makes the presented tunable combline filter interesting for some frequency-agile applications in which the low in-band loss variation and high selectivity are much desired while the absolute insertion loss can be a tradeoff. The second part (Part II) is devoted to the design of miniaturized passive microwave filters with improved characteristics. For this, the concept of artificial right-handed and left-handed transmission lines are applied to the signal interference filtering topology, which results in a compact circuit size and good out-of-band performance. In particular, for a further size reduction, such filter is implemented in the forms of multilayered structure by using liquid crystal polymer (LCP) technology. Additionally, another two types of miniaturized bandpass filters using stepped impedance resonators are demonstrated, which are implemented based on different fabrication processes (i.e. LCP bonded multilayer PCB technology and a standard planar PCB technology). Among their main features, the compact size, wide passband, broad stopband with multiple transmission zeros and circuit simplicity are highlighted. For all the proposed design techniques and filtering structures, exhaustive theoretical analyses are done, and design equations and guide rules are provided. Furthermore, all the proposed schemes and/or ideas have been experimentally validated through the design, implementation and measurement of different filters. The fabrication processes of multilayer technology utilized: liquid crystal polymer (LCP) technology and liquid crystal polymer (LCP) bonded multilayer printed circuit board (PCB) technology, are also demonstrated for reference. All of the results achieved in this dissertation make the proposed filters very attractive for their use in modern wireless communication systems.MultiWaves Project (PIRSES-GA-2010-247532) of the Seventh Framework Programme (FP7), European Commission

A low-cost microwave filter with improved passband and stopband characteristics using stub loaded multiple mode resonator for 5g mid-band applications

This paper presents the design and implementation of a printed circuit microwave band-pass filter for 5G mid-band applications, using a Stub Loaded Multiple Mode Resonator (SL-MMR) technique. The objective of this article is to introduce a low-cost microstrip filter with improved passband and stopband characteristics, based on a mathematical analysis of stub loaded resonators. The filter cost is reduced by selecting the low-cost FR4 dielectric material as a substrate for the proposed filter. Based on the transmission line model of the filter, mathematical expressions are derived to predict the odd-mode and the even-mode resonant frequencies of the SL-MMR. The mathematical model also highlights the capability of controlling the position of the SL-MMR resonant frequen-cies, so that the 5G sub-band that extends along the range (3.7–4.2 GHz) can perfectly be covered with almost a flat passband. At the resonance frequency, a fractional bandwidth of 12.8% (500 MHz impedance bandwidth) has been obtained with a return loss of more than 18 dB and an insertion loss of less than 2.5 dB over the targeted bandwidth. Furthermore, a pair of parasitic elements is attached to the proposed filter to create an additional transmission zero in the lower stopband of the filter to enhance the suppression of the filter stopband. The measured and simulation results are well agreed, and both reveal the acceptable performance of the stopband and passband characteristics of the filter

The Study of Reconfigurable Antennas and Associated Circuitry

This research focuses on the design of pattern reconfigurable antennas and the associated circuitry. The proposed pattern reconfigurable antenna designs benefit from advantages such as maximum pattern diversity and optimum switching circuits to realise 5G reconfigurable antennas. Whereas MIMO based solutions can provide increased channel capacity, they demand high computational capability and power consumption due to multiple channel processing. This prevents their use in many applications most notably in the Internet of Things where power consumption is of key importance. A switched-beam diversity allows an energy-efficient solution improving the link budget even for small low-cost battery operated IoT/sensor network applications. The main focus of the antenna reconfiguration in this work is for switched-beam diversity. The fundamental switching elements are discussed including basic PIN diode circuits. Techniques to switch the antenna element in the feed or shorting the antenna element to the ground plane are presented. A back-to-back microstrip patch antenna with two hemispherical switchable patterns is proposed. The patch elements on a common ground plane, are switched with a single-pole double-throw PIN diode circuit. Switching the feed selects either of two identical oppositely oriented radiation patterns for maximum diversity in one plane. The identical design of the antenna elements provides similar performance control of frequency and radiation pattern in different states. This antenna provides a simple solution to cross-layer PIN diode circuit designs. A mirrored structure study provides an understanding of performance control for different switching states. A printed inverted-F antenna is presented for monopole reconfigurable antenna design. The proposed low-profile antenna consists of one main radiator and one parasitic element. By shorting the parasitic element to the ground plane using only one PIN diode, the antenna is capable of switching both the pattern and polarisation across the full bandwidth. The switched orthogonal pattern provides the maximum spatial pattern diversity and is realised using a simple structure. Then, a dual-stub coplanar Vivaldi antenna with a parasitic element is presented for the 5G mm-Wave band. The use of a dual-stub coupled between the parasitic element and two tapered slots is researched. The parasitic element shape and size is optimised to increase the realised gain. A bandpass coupled line filter is used for frequency selective features. The use of slits on the outer edge of the ground plane provides a greater maximum gain. This integrated filtenna offers lower insertion loss than the commercial DC blocks. The UWB antenna with an integrated filter can be used for harmonic suppression. The influence of the integrated filter circuit close to the antenna geometry informs the design of PIN diode circuit switching and power supply in the 5G band. Based on the filter design in the mm-Wave band, a method of designing a feasible DC power supply for the PIN diode in the mm-Wave band is studied. A printed Yagi-Uda antenna array is integrated with switching circuitry to realise a switched 180° hemispheres radiation pattern. The antenna realises a maximum diversity in one plane. The study offers the possibility to use PIN diodes in the mm-Wave band for reconfigurable antenna designs. For the presented antennas, key geometric parameters are discussed for improved understanding of the trade-offs in radiation pattern/beamwidth and gain control for reconfigurable antenna applications