Impulse radio ultra wideband over fiber techniques for broadband in-building network applications

In recent years, the demand for high bandwidth and mobility from the end users has been continuously growing. To satisfy this demand, broadband communication technologies that combined the benefit of both wired and wireless are considered as vital solutions. These hybrid optical wireless solutions enable multi-Gbit/s transmission as well as adequate flexibility in terms of mobility. Optical fiber is the ideal medium for such hybrid solution due its signal transparency and wide bandwidth. On the other hand, ultra wideband(UWB) radio over optical fiber technology is considered to be one of the key promising technologies for broadband communication and sensor network applications. The growing interest for UWB is mainly due to its numerous attractive features, such as low power spectral density, tolerance to multipath fading, low probability of interception, coexistence with other wireless services and capability of providing cost-effective > 1 Gb/s transmission. The main idea of UWB over fiber is to deliver UWB radio signals over optical channels, where the optical part serves as a backbone communication infrastructure to carry the UWB signal with a bandwidth of several GHz. This enables multiple novel applications such as: range extension of high speed wireless personal area networks (WPANs), low cost distributed antenna systems, secure and intelligent networks, or delivering broadband services to remote areas. In particular, this thesis deals with novel concepts on shaping and generation of IR-UWB pulses, theoretical and experimental demonstrations over different fiber types, routing of integrated wired/wireless IR-UWB services and effect of fiber types on ranging/localization of IR-UWB-over-fiber systems. Accordingly, this thesis investigates techniques for delivery of high data rate wireless services using impulse radio ultra wideband (IR-UWB) over fiber technology for both access and in-building network applications. To effectively utilize the emission mask imposed for UWB technologies by the Federal Communications Commission(FCC), novel pulse shaping techniques have been investigated and experimentally demonstrated. Comparison of the proposed pulses with conventional ones in terms of the compliance to the FCC-mask requirements, spectral power efficiencies and wireless coverage has been theoretically studied. Simple and efficient optical generation of the new pulse has been experimentally demonstrated. Furthermore, performance evaluation of 2 Gb/s transmission of IR-UWB over different types of fiber such as 25 km silica single-mode, 4.4 km silica multi-mode and 100 m plastic heavily-multi-mode fiber have been performed. To improve the functionalities of in-building networks for the delivery of wireless services; techniques that provide flexibility in terms of dynamic capacity allocation have been investigated. By employing wavelength conversion based on cross-gain modulation in optical semiconductor amplifiers(SOA), routing of three optical channels of IR-UWB over fiber system has been experimentally realized. To reduce the cost of the overall system and share the optical infrastructure, an integrated testbed for wired baseband data and wireless IR-UWB over 1 km SMF-28 fiber has been developed. Accordingly, 1.25 Gb/s wired baseband and 2 Gb/s wireless IR-UWB data have been successfully transmitted over the testbed. Furthermore, to improve the network flexibility, routing of both wired baseband and wireless signals has been demonstrated. Additionally, the ranging and localization capability of IR-UWB over fiber for in-door wireless picocells have been investigated. The effect of different fiber types (4 km SMF, 4.4 km GI-MMF and 100 m PF GI-POF) on the accuracy of the range estimation using time-of-arrival (ToA) ranging technique has been studied. A high accuracy in terms of cm level was achieved due to the combined effect of high bandwidth IR-UWB pulses, short reach fiber and low chromatic dispersion at 1300nm wavelength. Furthermore, ranging/ localization using IR-UWB over fiber system provides additional benefit of centralizing complex processing algorithms, simplifying radio access points, relaxing synchronization requirement, enabling energy-efficient and efficient traffic management networks. All the concepts, design and system experiments presented in this thesis underline the strong potential of IR-UWB for over optical fiber(silica and plastic) techniques for future smart, capacity and energy-efficient broadband in-building network applications

Improving the Performance of Wireless LANs

This book quantifies the key factors of WLAN performance and describes methods for improvement. It provides theoretical background and empirical results for the optimum planning and deployment of indoor WLAN systems, explaining the fundamentals while supplying guidelines for design, modeling, and performance evaluation. It discusses environmental effects on WLAN systems, protocol redesign for routing and MAC, and traffic distribution; examines emerging and future network technologies; and includes radio propagation and site measurements, simulations for various network design scenarios, numerous illustrations, practical examples, and learning aids

Multimode fibre broadband access and self-referencing sensor networks

Future Internet Access technologies are supposed to bring us a very performing connection to the main door of our homes. At the same time, new services and devices and their increase use will require data transfers at speeds exceeding 1Gbps inside the building or home at the horizon 2012. Both drivers lead to the deployment of a high-quality, futureproof network inside buildings and homes. This environment may end up taking advantage of optical cabling solutions as an alternative to more traditional copper or pure wireless approaches. Related to this latter fact, the objectives of this work are: • The achievement of a full convergence scenario between optical networks from the telecommunication services providers to the end users underscores the necessity of accurate and realistic fibre models in assessing the performance of broadband access networks with the premises of high-capacity and total compatibility. Silicabased MMFs and PF GIPOFs are the most promising candidates for such a convergence within the in-building/home scenario. Contributions to a better understanding of the possibilities of signal transmission outside the baseband of such fibres are investigated, in order to extend their capabilities, together with the evaluation of current fibre frequency response theoretical models by means of an extensive set of measurements. • The achievement of a full convergence scenario between optical networks from the telecommunication services providers to the end users is also contingent on research and development in the field of optical fibre sensors, mainly driven by the growing demand of fully building/home and industry automation, leading to a reliable integration of the optical networks. Related to this, development of multiplexing and measurement techniques for fibre-optic intensity-based sensors are analyzed and experimentally investigated. In the sensor network topology proposed, by replacing the fibre delay line with an electronic delay in the reception stage, it is possible to avoid long fibre delay coils in the remote sensing points and achieving a compact, flexible and re-configurable self-referencing technique. Applications in both scenarios can be considered, on the one hand the in-building/home network and on the other hand the WDM-PON access network topology through which operators provision the different services. -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------La demanda e incursión en la sociedad de nuevos servicios multimedia, tales como televisión por Internet (IPTV, Internet Protocol Television) o video-bajo-demanda (VoD, Video on Demand) junto con el incremento del tráfico de datos requerido para nuevas aplicaciones como la televisión por alta definición (HDTV, High-Definition Television) y transferencias P2P (Peer-to-Peer) exigen un aumento de la capacidad de las redes de datos desplegadas hoy en día. Para hacer frente a este aumento de la demanda de capacidad de las redes de acceso, los proveedores de estos servicios multimedia están reemplazando las infraestructuras de las redes de acceso basadas en cable coaxial, tales como xDSL (x- Digital Subscriber Line), por otras nuevas de mayor capacidad desplegadas en fibra óptica, permitiendo la interconexión de los nodos de red con los múltiples hogares y negocios de los abonados, constituyendo el núcleo de lo que es conocido como “fibra hasta el hogar/nodo/edificio” o redes FTTx. Tradicionalmente el despliegue de las redes ópticas se ha realizado mediante fibra óptica monomodo de sílice (SMF, Singlemode Fibre). Ello es debido a su gran ancho de banda que permite una gran capacidad de transporte de servicios y datos. Es por ello que en base a este tipo de fibra se ha realizado el despliegue de redes de distribución y metropolitanas y, de un tiempo a esta parte, incluso penetrando su instalación en las redes de acceso. Junto con lo anteriormente expuesto, existe una necesidad de convergencia de servicios e infraestructuras dentro de las redes de acceso. Actualmente, cables coaxiales, par trenzado de cobre e incluso señales inalámbricas se encuentran entremezcladas dentro del hogar proporcionando servicios diferentes con apenas cooperación entre ellos. Una infraestructura común dentro del hogar en el que una gran cantidad de servicios pudieran ser integrados y soportados por la misma sería un aspecto deseable. Y es más, frente a las desventajas de infraestructuras basadas en cable de cobre (cable coaxial y par trenzado) como son susceptibilidad a interferencias electromagnéticas, presencia de crosstalk y relativa baja capacidad de transporte de datos, las fibras ópticas (tanto en su versión monomodo como multimodo) presentan las ventajas de un menor volumen, mayor flexibilidad y menor peso junto con una capacidad mayor de transmisión de datos sobre distancias mayores. Es por esto que éstas últimas constituyen la base para las futuras redes de acceso en el hogar

Quality of service differentiation for multimedia delivery in wireless LANs

Delivering multimedia content to heterogeneous devices over a variable networking environment while maintaining high quality levels involves many technical challenges. The research reported in this thesis presents a solution for Quality of Service (QoS)-based service differentiation when delivering multimedia content over the wireless LANs. This thesis has three major contributions outlined below: 1. A Model-based Bandwidth Estimation algorithm (MBE), which estimates the available bandwidth based on novel TCP and UDP throughput models over IEEE 802.11 WLANs. MBE has been modelled, implemented, and tested through simulations and real life testing. In comparison with other bandwidth estimation techniques, MBE shows better performance in terms of error rate, overhead, and loss. 2. An intelligent Prioritized Adaptive Scheme (iPAS), which provides QoS service differentiation for multimedia delivery in wireless networks. iPAS assigns dynamic priorities to various streams and determines their bandwidth share by employing a probabilistic approach-which makes use of stereotypes. The total bandwidth to be allocated is estimated using MBE. The priority level of individual stream is variable and dependent on stream-related characteristics and delivery QoS parameters. iPAS can be deployed seamlessly over the original IEEE 802.11 protocols and can be included in the IEEE 802.21 framework in order to optimize the control signal communication. iPAS has been modelled, implemented, and evaluated via simulations. The results demonstrate that iPAS achieves better performance than the equal channel access mechanism over IEEE 802.11 DCF and a service differentiation scheme on top of IEEE 802.11e EDCA, in terms of fairness, throughput, delay, loss, and estimated PSNR. Additionally, both objective and subjective video quality assessment have been performed using a prototype system. 3. A QoS-based Downlink/Uplink Fairness Scheme, which uses the stereotypes-based structure to balance the QoS parameters (i.e. throughput, delay, and loss) between downlink and uplink VoIP traffic. The proposed scheme has been modelled and tested through simulations. The results show that, in comparison with other downlink/uplink fairness-oriented solutions, the proposed scheme performs better in terms of VoIP capacity and fairness level between downlink and uplink traffic

Elektromagnetische Verträglichkeit emv : Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit. Creating a compatible future. Köln, 17.-19.03.2020

Proceedings der EMV 2020

Elektromagnetische Verträglichkeit emv : Internationale Fachmesse und Kongress für Elektromagnetische Verträglichkeit : Düsseldorf, 11.-13.03.2014

Proceedings der EMV 2014