Characteristic Modes Analysis of a Near-Field Polarization-Conversion Metasurface for the Design of a Wideband Circularly Polarized X-Band Antenna

A metasurface (MS) based on loop elements operating in the near field of a linearly-polarized microstrip antenna is employed to realize a circularly polarized radiated field. The properties of the loop unit cell are highlighted with the help of the Characteristic Mode Analysis that is employed for investigating the achievable linear to circular polarization conversion bandwidth and providing the guidelines for the design of the final antenna. A finite structure comprising 4×4 unit cells is tailored for achieving a circularly polarized far field within the whole X-band adopted for satellite communications (7.25 GHz-7.75 GHz, 7.9 GHz-8.4 GHz). A simple but effective single-port excitation scheme is adopted, and the overall performance are assessed by measurements on the fabricated prototype. The good agreement between simulated and measured results confirms the reliability of the proposed approach as well as the meaningful insight provided by Characteristic Modes Theory

Recent developments of reconfigurable antennas for 4G and 5G wireless communications: A survey

YesReconfigurable antennas play important roles in smart and adaptive systems and are the subject of many research studies. They offer several advantages such as multifunctional capabilities, minimized volume requirements, low front-end processing efforts with no need for a filtering element, good isolation, and sufficient out-ofband rejection; these make them well suited for use in wireless applications such as fourth generation (4G) and fifth generation (5G) mobile terminals. With the use of active materials such as microelectromechanical systems (MEMS), varactor or p-i-n (PIN) diodes, an antenna’s characteristics can be changed through altering the current flow on the antenna structure. If an antenna is to be reconfigurable into many different states, it needs to have an adequate number of active elements. However, a large number of high-quality active elements increases cost, and necessitates complex biasing networks and control circuitry. We review some recently proposed reconfigurable antenna designs suitable for use in wireless communications such as cognitiveratio (CR), multiple-input multiple-output (MIMO), ultra-wideband (UWB), and 4G/5G mobile terminals. Several examples of antennas with different reconfigurability functions are analyzed and their performances are compared. Characteristics and fundamental properties of reconfigurable antennas with single and multiple reconfigurability modes are investigated.European Union’s Horizon 2020 research and innovation programme under grant agreement H2020-MSCA-ITN-2016 SECRET-722424

1-D broadside-radiating leaky-wave antenna based on a numerically synthesized impedance surface

A newly-developed deterministic numerical technique for the automated design of metasurface antennas is applied here for the first time to the design of a 1-D printed Leaky-Wave Antenna (LWA) for broadside radiation. The surface impedance synthesis process does not require any a priori knowledge on the impedance pattern, and starts from a mask constraint on the desired far-field and practical bounds on the unit cell impedance values. The designed reactance surface for broadside radiation exhibits a non conventional patterning; this highlights the merit of using an automated design process for a design well known to be challenging for analytical methods. The antenna is physically implemented with an array of metal strips with varying gap widths and simulation results show very good agreement with the predicted performance

Beam scanning by liquid-crystal biasing in a modified SIW structure

A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium

A Novel Low-RCS and Wideband Circularly Polarized Patch Array Based on Metasurface

In this paper, a novel circularly polarized (CP) array antenna based on metasurface (MS) is designed to realize wideband radar cross section (RCS) reduction, wideband operation and high gain. The MS is composed of compact polarization-dependent artificial magnetic conductors (PDAMCs), by regularly arranging the PDAMCs like chessboard directly on the top of the patch antenna, the MS can significantly bring RCS down. On the other hand, due to the compact structure of MS and the driven array patches, surface wave propagates on the MS and generates additional resonances to achieve wide operation band and high gain. Both the simulated and measured results indicate that the RCS at bore-sight is reduced more than 6dB from 5.08 GHz to 11.46 GHz (77.15%) except for some frequency points, The antenna yielded a good broadside left-hand CP radiation, the ǀS11ǀ<-10 dB impedance bandwidth is from 5.03 GHz to 7.4 GHz (38.13%) and the 1-dB axial ratio bandwidth is from 4GHz to 8GHz. Both the radiating and scattering performances have been obviously improved

All-metal wideband metasurface for near-field transformation of medium-to-high gain electromagnetic sources

Electromagnetic (EM) metasurfaces are essential in a wide range of EM engineering applications, from incorporated into antenna designs to separate devices like radome. Near-field manipulators are a class of metasurfaces engineered to tailor an EM source's radiation patterns by manipulating its near-field components. They can be made of all-dielectric, hybrid, or all-metal materials; however, simultaneously delivering a set of desired specifications by an all-metal structure is more challenging due to limitations of a substrate-less configuration. The existing near-field phase manipulators have at least one of the following limitations; expensive dielectric-based prototyping, subject to ray tracing approximation and conditions, narrowband performance, costly manufacturing, and polarization dependence. In contrast, we propose an all-metal wideband phase correcting structure (AWPCS) with none of these limitations and is designed based on the relative phase error extracted by post-processing the actual near-field distributions of any EM sources. Hence, it is applicable to any antennas, including those that cannot be accurately analyzed with ray-tracing, particularly for near-field analysis. To experimentally verify the wideband performance of the AWPCS, a shortened horn antenna with a large apex angle and a non-uniform near-field phase distribution is used as an EM source for the AWPCS. The measured results verify a significant improvement in the antenna's aperture phase distribution in a large frequency band of 25%

Design of high gain base station antenna array for mm-wave cellular communication systems

Millimeter wave (mm-Wave) wireless communication systems require high gain antennas to overcome path loss effects and thereby enhance system coverage. This paper presents the design and analysis of an antenna array for high gain performance of future mm-wave 5G communication systems. The proposed antenna is based on planar microstrip technology and fabricated on 0.254 mm thick dielectric substrate (Rogers-5880) having a relative permittivity of 2.2 and loss tangent of 0.0009. The single radiating element used to construct the antenna array is a microstrip patch that has a configuration resembling a two-pronged fork. The single radiator has a realized gain of 7.6 dBi. To achieve the gain required by 5G base stations, a 64-element array antenna design is proposed which has a bore side gain of 21.2 dBi at 37.2 GHz. The 8 × 8, 8 × 16, and 8 × 32 antenna array designs described here were simulated and optimized using CST Microwave Studio, which is a 3D full-wave electromagnetic solver. The overall characteristics of the array in terms of reflection-coefficient and radiation patterns makes the proposed design suitable for mm-Wave 5G and other communication systems.Dr. Mohammad Alibakhshikenari acknowledges support from the CONEX-Plus programme funded by Universidad Carlos III de Madrid and the European Union's Horizon 2020 research and innovation programme under the Marie Sklodowska-Curie grant agreement No. 801538. In addition, this work was partially supported by Ministerio de Ciencia, Innovación y Universidades, Gobierno de España (Agencia Estatal de Investigación, Fondo Europeo de Desarrollo Regional -FEDER-, European Union) under the research grant PID2021-127409OB-C31 CONDOR. The authors also sincerely appreciate funding from Researchers Supporting Project number (RSP2023R58), King Saud University, Riyadh, Saudi Arabia

Recent progress on RF orbital angular momentum antennas

In the last five years or so, there has been a great interest in RF OAM to address the contradiction between the lack of wireless spectrum resources and the continually growing demands of the bandwidth. Recent developments and technological advancements in antenna design, material science, and integrated circuits have enabled miniaturized, multiple modes, tunable in radio frequency (RF) orbital angular momentum (OAM) antenna designs. From conventional methods such as spiral phase plate and reflector antenna to antenna array and metasurface, the working principle and structures are introduced. To improve the performance of RF OAM antennas, several innovative physical concepts have been explored for the designs of RF OAM antenna designs. In this paper, we present an up-to-date survey on the development of RF OAM antenna technologies. Open issues and development trends are explored as a source of inspiration towards the future better outcome of RF OAM antenna designs