4,551 research outputs found
State-of-the-art in Power Line Communications: from the Applications to the Medium
In recent decades, power line communication has attracted considerable
attention from the research community and industry, as well as from regulatory
and standardization bodies. In this article we provide an overview of both
narrowband and broadband systems, covering potential applications, regulatory
and standardization efforts and recent research advancements in channel
characterization, physical layer performance, medium access and higher layer
specifications and evaluations. We also identify areas of current and further
study that will enable the continued success of power line communication
technology.Comment: 19 pages, 12 figures. Accepted for publication, IEEE Journal on
Selected Areas in Communications. Special Issue on Power Line Communications
and its Integration with the Networking Ecosystem. 201
Recommended from our members
The impact of organisational culture on WiMax adoption by Saudi SMEs
Although there is some research that examines Worldwide Inter-operability for Microwave Access (WiMax) adoption, the role of the organisational culture by Small and Medium Enterprises (SMEs) has not been studied in the context of the Kingdom of Saudi Arabia (KSA). This paper presents the outcome of a study carried out to examine the impact of organisational culture on the WiMax adoption by SMEs in the KSA. Based on Cameron and Quinn's Organisational Culture Assessments Instrument (OCAI), 63 questionnaires were distributed to different SMEs in Saudi Arabia. The results showed that there is a relatively low level of WiMax adoption by Saudi SMEs. Findings stated that Saudi SMEs are dominated by the clan culture where people are less innovative than the people in adhocracy culture
Performance Comparison of Dual Connectivity and Hard Handover for LTE-5G Tight Integration in mmWave Cellular Networks
MmWave communications are expected to play a major role in the Fifth
generation of mobile networks. They offer a potential multi-gigabit throughput
and an ultra-low radio latency, but at the same time suffer from high isotropic
pathloss, and a coverage area much smaller than the one of LTE macrocells. In
order to address these issues, highly directional beamforming and a very
high-density deployment of mmWave base stations were proposed. This Thesis aims
to improve the reliability and performance of the 5G network by studying its
tight and seamless integration with the current LTE cellular network. In
particular, the LTE base stations can provide a coverage layer for 5G mobile
terminals, because they operate on microWave frequencies, which are less
sensitive to blockage and have a lower pathloss. This document is a copy of the
Master's Thesis carried out by Mr. Michele Polese under the supervision of Dr.
Marco Mezzavilla and Prof. Michele Zorzi. It will propose an LTE-5G tight
integration architecture, based on mobile terminals' dual connectivity to LTE
and 5G radio access networks, and will evaluate which are the new network
procedures that will be needed to support it. Moreover, this new architecture
will be implemented in the ns-3 simulator, and a thorough simulation campaign
will be conducted in order to evaluate its performance, with respect to the
baseline of handover between LTE and 5G.Comment: Master's Thesis carried out by Mr. Michele Polese under the
supervision of Dr. Marco Mezzavilla and Prof. Michele Zorz
Flat Cellular (UMTS) Networks
Traditionally, cellular systems have been built in a hierarchical manner: many specialized cellular access network elements that collectively form a hierarchical cellular system. When 2G and later 3G systems were designed there was a good reason to make system hierarchical: from a cost-perspective it was better to concentrate traffic and to share the cost of processing equipment over a large set of users while keeping the base stations relatively cheap. However, we believe the economic reasons for designing cellular systems in a hierarchical manner have disappeared: in fact, hierarchical architectures hinder future efficient deployments. In this paper, we argue for completely flat cellular wireless systems, which need just one type of specialized network element to provide radio access network (RAN) functionality, supplemented by standard IP-based network elements to form a cellular network. While the reason for building a cellular system in a hierarchical fashion has disappeared, there are other good reasons to make the system architecture flat: (1) as wireless transmission techniques evolve into hybrid ARQ systems, there is less need for a hierarchical cellular system to support spatial diversity; (2) we foresee that future cellular networks are part of the Internet, while hierarchical systems typically use interfaces between network elements that are specific to cellular standards or proprietary. At best such systems use IP as a transport medium, not as a core component; (3) a flat cellular system can be self scaling while a hierarchical system has inherent scaling issues; (4) moving all access technologies to the edge of the network enables ease of converging access technologies into a common packet core; and (5) using an IP common core makes the cellular network part of the Internet
A Unified Mobility Management Architecture for Interworked Heterogeneous Mobile Networks
The buzzword of this decade has been convergence: the convergence of telecommunications, Internet, entertainment, and information technologies for the seamless provisioning of multimedia services across different network types. Thus the future Next Generation Mobile Network (NGMN) can be envisioned as a group of co-existing heterogeneous mobile data networking technologies sharing a common Internet Protocol (IP) based backbone. In such all-IP based heterogeneous networking environments, ongoing sessions from roaming users are subjected to frequent vertical handoffs across network boundaries. Therefore, ensuring uninterrupted service continuity during session handoffs requires successful mobility and session management mechanisms to be implemented in these participating access networks. Therefore, it is essential for a common interworking framework to be in place for ensuring seamless service continuity over dissimilar networks to enable a potential user to freely roam from one network to another. For the best of our knowledge, the need for a suitable unified mobility and session management framework for the NGMN has not been successfully addressed as yet. This can be seen as the primary motivation of this research. Therefore, the key objectives of this thesis can be stated as: To propose a mobility-aware novel architecture for interworking between heterogeneous mobile data networks To propose a framework for facilitating unified real-time session management (inclusive of session establishment and seamless session handoff) across these different networks. In order to achieve the above goals, an interworking architecture is designed by incorporating the IP Multimedia Subsystem (IMS) as the coupling mediator between dissipate mobile data networking technologies. Subsequently, two different mobility management frameworks are proposed and implemented over the initial interworking architectural design. The first mobility management framework is fully handled by the IMS at the Application Layer. This framework is primarily dependant on the IMS’s default session management protocol, which is the Session Initiation Protocol (SIP). The second framework is a combined method based on SIP and the Mobile IP (MIP) protocols, which is essentially operated at the Network Layer. An analytical model is derived for evaluating the proposed scheme for analyzing the network Quality of Service (QoS) metrics and measures involved in session mobility management for the proposed mobility management frameworks. More precisely, these analyzed QoS metrics include vertical handoff delay, transient packet loss, jitter, and signaling overhead/cost. The results of the QoS analysis indicates that a MIP-SIP based mobility management framework performs better than its predecessor, the Pure-SIP based mobility management method. Also, the analysis results indicate that the QoS performances for the investigated parameters are within acceptable levels for real-time VoIP conversations. An OPNET based simulation platform is also used for modeling the proposed mobility management frameworks. All simulated scenarios prove to be capable of performing successful VoIP session handoffs between dissimilar networks whilst maintaining acceptable QoS levels. Lastly, based on the findings, the contributions made by this thesis can be summarized as: The development of a novel framework for interworked heterogeneous mobile data networks in a NGMN environment. The final design conveniently enables 3G cellular technologies (such as the Universal Mobile Telecommunications Systems (UMTS) or Code Division Multiple Access 2000 (CDMA2000) type systems), Wireless Local Area Networking (WLAN) technologies, and Wireless Metropolitan Area Networking (WMAN) technologies (e.g., Broadband Wireless Access (BWA) systems such as WiMAX) to interwork under a common signaling platform. The introduction of a novel unified/centralized mobility and session management platform by exploiting the IMS as a universal coupling mediator for real-time session negotiation and management. This enables a roaming user to seamlessly handoff sessions between different heterogeneous networks. As secondary outcomes of this thesis, an analytical framework and an OPNET simulation framework are developed for analyzing vertical handoff performance. This OPNET simulation platform is suitable for commercial use
Survey of Spectrum Sharing for Inter-Technology Coexistence
Increasing capacity demands in emerging wireless technologies are expected to
be met by network densification and spectrum bands open to multiple
technologies. These will, in turn, increase the level of interference and also
result in more complex inter-technology interactions, which will need to be
managed through spectrum sharing mechanisms. Consequently, novel spectrum
sharing mechanisms should be designed to allow spectrum access for multiple
technologies, while efficiently utilizing the spectrum resources overall.
Importantly, it is not trivial to design such efficient mechanisms, not only
due to technical aspects, but also due to regulatory and business model
constraints. In this survey we address spectrum sharing mechanisms for wireless
inter-technology coexistence by means of a technology circle that incorporates
in a unified, system-level view the technical and non-technical aspects. We
thus systematically explore the spectrum sharing design space consisting of
parameters at different layers. Using this framework, we present a literature
review on inter-technology coexistence with a focus on wireless technologies
with equal spectrum access rights, i.e. (i) primary/primary, (ii)
secondary/secondary, and (iii) technologies operating in a spectrum commons.
Moreover, we reflect on our literature review to identify possible spectrum
sharing design solutions and performance evaluation approaches useful for
future coexistence cases. Finally, we discuss spectrum sharing design
challenges and suggest future research directions
- …