Multiple Access Trade Study

The Personal Access Satellite System (PASS) strawman design uses a hybrid Time Division Multiple Access (TDMA)/Frequency Division Multiple Access (FDMA) implementation. TDMA is used for the forward direction (from Suppliers to Users), and FDMA for the return direction (from Users to Suppliers). An alternative architecture is proposed that will require minimal real time coordination and yet provide a fast access method by using random access Code Division Multiple Access (CDMA). The CDMA system issues are addressed such as connecting suppliers and users, both of whom may be located anywhere in the CONUS, when the user terminals are constrained in size and weight; and providing efficient traffic routing under highly variable traffic requirements. It is assumed that bandwidth efficiency is not of paramount importance. CDMA or Spread Spectrum Multiple Access (SSMA) communication is a method in which a group of carriers operate at the same nominal center frequency but are separable from each other by the low cross correlation of the spreading codes used. Interference and multipath rejection capability, ease of selective addressing and message screening, low density power spectra for signal hiding and security, and high resolution ranging are among the benefits of spread spectrum communications

Flat Cellular (UMTS) Networks

Traditionally, cellular systems have been built in a hierarchical manner: many specialized cellular access network elements that collectively form a hierarchical cellular system. When 2G and later 3G systems were designed there was a good reason to make system hierarchical: from a cost-perspective it was better to concentrate traffic and to share the cost of processing equipment over a large set of users while keeping the base stations relatively cheap. However, we believe the economic reasons for designing cellular systems in a hierarchical manner have disappeared: in fact, hierarchical architectures hinder future efficient deployments. In this paper, we argue for completely flat cellular wireless systems, which need just one type of specialized network element to provide radio access network (RAN) functionality, supplemented by standard IP-based network elements to form a cellular network. While the reason for building a cellular system in a hierarchical fashion has disappeared, there are other good reasons to make the system architecture flat: (1) as wireless transmission techniques evolve into hybrid ARQ systems, there is less need for a hierarchical cellular system to support spatial diversity; (2) we foresee that future cellular networks are part of the Internet, while hierarchical systems typically use interfaces between network elements that are specific to cellular standards or proprietary. At best such systems use IP as a transport medium, not as a core component; (3) a flat cellular system can be self scaling while a hierarchical system has inherent scaling issues; (4) moving all access technologies to the edge of the network enables ease of converging access technologies into a common packet core; and (5) using an IP common core makes the cellular network part of the Internet

Performance Evaluation of Distributed-Antenna Communications Systems Using Beam-Hopping

Digital beamforming (DBF) techniques are capable of improving the performance of communications systems significantly. However, if the transmitted signals are conflicted with strong interference, especially, in the direction of the transmitted beams , these directional jamming signals will severely degrade the system performance. In order to efficiently mitigate the interference of the directional jammers, in this contribution a beam-hopping (BH) communications scheme is proposed. In the proposed BH communications scheme, only one pair of the beams is used for transmission and it hops from one to the next according to an assigned BH pattern. In this contribution a range of expressions in terms of the average SINR performance have been derived, when both the uplink and downlink are considered. The average SINR performance of the proposed BH scheme and that of the conventional single-beam (SB) as well as multiple-beam (MB) assisted beam-processing schemes have been investigated. Our analysis and results show that the proposed BH scheme is capable of efficiently combating the directional jamming, with the aid of utilizing the directional gain of the beams generated by both the transmitter and the receiver. Furthermore, the BH scheme is capable of reducing the intercept probability of the communications. Therefore, the proposed BH scheme is suitable for communications, when several distributed antenna arrays are available around a mobile

Vulnerability of LTE to Hostile Interference

LTE is well on its way to becoming the primary cellular standard, due to its performance and low cost. Over the next decade we will become dependent on LTE, which is why we must ensure it is secure and available when we need it. Unfortunately, like any wireless technology, disruption through radio jamming is possible. This paper investigates the extent to which LTE is vulnerable to intentional jamming, by analyzing the components of the LTE downlink and uplink signals. The LTE physical layer consists of several physical channels and signals, most of which are vital to the operation of the link. By taking into account the density of these physical channels and signals with respect to the entire frame, as well as the modulation and coding schemes involved, we come up with a series of vulnerability metrics in the form of jammer to signal ratios. The ``weakest links'' of the LTE signals are then identified, and used to establish the overall vulnerability of LTE to hostile interference.Comment: 4 pages, see below for citation. M. Lichtman, J. Reed, M. Norton, T. Clancy, "Vulnerability of LTE to Hostile Interference'', IEEE Global Conference on Signal and Information Processing (GlobalSIP), Dec 201

Uplink capacity of self-organizing clustered orthogonal CDMA networks in flat fading channels

International audienceIn this paper, we derive a deterministic equivalent of the Shannon-transform of certain type of large unitary random matrices. This approximation is exploited to evaluate the uplink channel capacity of clustered orthogonal CDMA network. When non-uniform power allocation among the users of each cluster is allowed, we derive an explicit iterative water-filling algorithm which, upon convergence, achieves the multi-user decoding capacity. In particular, we show that, in a self-organizing clustered orthogonal CDMA network, each cluster can optimize its power allocation policy independently of the other clusters at the expense of a small feedback overhead. Simulations corroborate the theoretical derivations

Destination-directed, packet-switching architecture for 30/20-GHz FDMA/TDM geostationary communications satellite network

A destination-directed packet switching architecture for a 30/20-GHz frequency division multiple access/time division multiplexed (FDMA/TDM) geostationary satellite communications network is discussed. Critical subsystems and problem areas are identified and addressed. Efforts have concentrated heavily on the space segment; however, the ground segment has been considered concurrently to ensure cost efficiency and realistic operational constraints

Numerical study on failure process of aluminium plate subjected to normal impact by hemispherical projectiles

In this paper a study is presented on the numerical analysis of the failure process of aluminium armour plate subjected to normal impact by hemispherical projectiles. The perforation process has been simulated by the application of 3D analysis using IMPACT dynamic FE program suite. The comparison on the elements size of meshing towards failure mode was observed and evaluated. The material behaviour of the target plate was approximated by an appropriate constitutive relation. The study covered different size of meshing element on target plate as well as different level of impact velocities. Different failure modes for each case were found. For low speed impact condition a petalling was observed, whereas for high speed impact a radial neck along with a holes enlargement was observed with better and uniform perforation mode. The deformation and failure mode of the impacted target plate will be given special attention in this investigation