Human-Machine Interface Development For Modifying Driver Lane Change Behavior In Manual, Automated, And Shared Control Automated Driving

Rear-end crashes are common on U.S. roads. Driver assistance and automated driving technologies can reduce rear-end crashes (among other crash types as well). Braking is assumed for forward collision warning (FCW) and automatic emergency braking (AEB) systems. Braking is also used for adaptive cruise control (ACC) and in automated driving systems more generally. However, steering may be advised in an emergency if the adjacent lane is clear and braking is unlikely to avoid a collision. Steering around an obstacle when feasible also eliminates the risk of becoming the new forward collision hazard. Driver assist technology like emergency steer assist (ESA) and Level 2 or Level 3 automated driving systems might facilitate manual emergency lane changes but may require the driver to manually initiate the maneuver, something which drivers are often reluctant to do. An Human-Machine Interface (HMI) might advise the driver of a steerable path when feasible in forward collision hazard situations. Such an HMI might also advise a driver of normal lane change opportunities that can reduce travel time, increase fuel efficiency, or simply enhance the driving experience by promoting `flow.\u27 This dissertation investigated the propensity of drivers to brake only versus steer in both manual and automated driving situations that end in a high-intensity forward collision hazard. A audio-visual Field of Safe Travel (FOST) cluster display and haptic steering wheel HMI were developed to advise drivers in both discretionary and emergency situations of a lane change opportunity. The HMI was tested in a moving base simulator in manual driving, in fully autonomous driving, and in shared-control autonomous driving during a simulated highway commute that ended in an high-intensity forward collision hazard situation. Results indicated that a) driver response was affected by the nature of the automated driving (faster response in hands-on shared control versus hands-off fully autonomous driving); b) exposure to the HMI in normal lane changes both familiarized the driver with the HMI and introduced a mental set that steering was also a possibility rather than braking only; c) but that drivers used their direct vision to determine their response in the emergency event. A methodological issue related to mental set was also uncovered and resolved through screening studies. The final study brought the dissertation full-circle, comparing hands-off fully automated driving to hands-on shared control automated driving in the context of either providing some or no exposure to the developed LCA system concept. Results of the final study indicated that shared control lies somewhere between that of manual driving and hands-off fully automate driving. Benefits were also shown to exist for the LCA system concept irrespective of whether the discrete haptic profiles are included or not. The discrete haptic profiles did not statistically reliably increase response times to the FC hazard event, although they do show a trend toward decreasing response variability. This finding solidified the fact that by implementing a system for benign driving that aids in establishing a mental set to steer around an obstacle may actually be beneficial for rear-end crash scenarios. This dissertation’s contributions include a) audio-visual FOST display concepts; b) discrete haptic steering display concepts; c) a paired-comparisons scaling for urgency for haptic displays applied while driving; d) a new ``mirage scenario\u27\u27 methodology for eliciting subjective assessments in the context of a forward collision hazard, briefly presented then removed, without risk of simulator sickness, and e) a methodological lesson for others who wish to investigate semi-automated and automated driving interventions and must manage driver mental set carefully

Automated tactile sensing for object recognition and localization

Thesis (Sc. D.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 1986.MICROFICHE COPY AVAILABLE IN ARCHIVES AND ENGINEERINGBibliography: leaves 115-119.by John Lewis Schneiter.Sc.D

Advanced Automation for Space Missions

The feasibility of using machine intelligence, including automation and robotics, in future space missions was studied

Fabricate

Bringing together pioneers in design and making within architecture, construction, engineering, manufacturing, materials technology and computation, Fabricate is a triennial international conference, now in its third year (ICD, University of Stuttgart, April 2017). Each year it produces a supporting publication, to date the only one of its kind specialising in Digital Fabrication. The 2017 edition features 32 illustrated articles on built projects and works in progress from academia and practice, including contributions from leading practices such as Foster + Partners, Zaha Hadid Architects, Arup, and Ron Arad, and from world-renowned institutions including ICD Stuttgart, Harvard, Yale, MIT, Princeton University, The Bartlett School of Architecture (UCL) and the Architectural Association

Fifth Conference on Artificial Intelligence for Space Applications

The Fifth Conference on Artificial Intelligence for Space Applications brings together diverse technical and scientific work in order to help those who employ AI methods in space applications to identify common goals and to address issues of general interest in the AI community. Topics include the following: automation for Space Station; intelligent control, testing, and fault diagnosis; robotics and vision; planning and scheduling; simulation, modeling, and tutoring; development tools and automatic programming; knowledge representation and acquisition; and knowledge base/data base integration

Proceedings of the 10th international conference on disability, virtual reality and associated technologies (ICDVRAT 2014)

The proceedings of the conferenc

Spatial Displays and Spatial Instruments

The conference proceedings topics are divided into two main areas: (1) issues of spatial and picture perception raised by graphical electronic displays of spatial information; and (2) design questions raised by the practical experience of designers actually defining new spatial instruments for use in new aircraft and spacecraft. Each topic is considered from both a theoretical and an applied direction. Emphasis is placed on discussion of phenomena and determination of design principles

Fabricate 2017

Bringing together pioneers in design and making within architecture, construction, engineering, manufacturing, materials technology and computation, Fabricate is a triennial international conference, now in its third year (ICD, University of Stuttgart, April 2017). Each year it produces a supporting publication, to date the only one of its kind specialising in Digital Fabrication. The 2017 edition features 32 illustrated articles on built projects and works in progress from academia and practice, including contributions from leading practices such as Foster + Partners, Zaha Hadid Architects, Arup, and Ron Arad, and from world-renowned institutions including ICD Stuttgart, Harvard, Yale, MIT, Princeton University, The Bartlett School of Architecture (UCL) and the Architectural Association

Development of a workload estimator: The influence of surrounding traffic behaviour on driver workload and performance

The consumers’ increasing desire to be connected at all times and the advancement of integrated functionality within the vehicle, increases the risk that drivers could be faced with information overload while driving. Given the importance of human interaction with technology within the vehicle, automobile manufacturers are introducing workload manager systems within the vehicles to help prevent driver overload. However the ability of the system to decide in a timely manner requires anticipation of changes in workload, depending on the capacity of the driver and matching it with the demand expected from the driving task such as the dynamic traffic environment. In relation to the need to understand the influence of traffic demand on driver workload, the work here comprises the systematic manipulation of traffic complexity and exploration of workload measures to highlight which are sensitive to primary task demand manipulated. A within-subjects design was used in the studies explored in this thesis to allow comparison between different manipulated traffic conditions. In the first simulator test, the ability of various objective and subjective workload measures to tap into drivers’ momentary workload was examined. Following the identification of a subjective measure that was sensitive to the influence of lane changes performed by neighbouring vehicle on drivers’ momentary workload, the characteristics of the lane change were explored in the subsequent studies involving single and dual-task conditions. Overall, these studies suggested suppression of non-urgent communications by a workload manager during safety-critical conditions involving critical cut-ins would be advantageous to both younger and older drivers. This thesis offers a novel and valuable contribution to the design of a workload estimator so as to ensure that the driving demand is always within drivers’ capacity to avoid driver overload. Results of these studies have also highlighted the utility of vehicle-based sensor data in improving workload manager functionality

Using MapReduce Streaming for Distributed Life Simulation on the Cloud

Distributed software simulations are indispensable in the study of large-scale life models but often require the use of technically complex lower-level distributed computing frameworks, such as MPI. We propose to overcome the complexity challenge by applying the emerging MapReduce (MR) model to distributed life simulations and by running such simulations on the cloud. Technically, we design optimized MR streaming algorithms for discrete and continuous versions of Conway’s life according to a general MR streaming pattern. We chose life because it is simple enough as a testbed for MR’s applicability to a-life simulations and general enough to make our results applicable to various lattice-based a-life models. We implement and empirically evaluate our algorithms’ performance on Amazon’s Elastic MR cloud. Our experiments demonstrate that a single MR optimization technique called strip partitioning can reduce the execution time of continuous life simulations by 64%. To the best of our knowledge, we are the first to propose and evaluate MR streaming algorithms for lattice-based simulations. Our algorithms can serve as prototypes in the development of novel MR simulation algorithms for large-scale lattice-based a-life models.https://digitalcommons.chapman.edu/scs_books/1014/thumbnail.jp