FLEXIBLE TEG ON THE ANKLE FOR MEASURING THE POWER GENERATED WHILE PERFORMING ACTIVITIES OF DAILY LIVING

In this work, a commercial flexible thermoelectric generator (f-TEG) was used to harvest the body thermal energy during the execution of activities of daily living (ADL). The f-TEG was placed at the level of the ankle, and the performed activities were sitting at the desk and walking. In the first stage of measurements, tests were performed to choose the value of the resistor load that maximizes the power output. Then, while performing ADL, the values of generated power were in the range from 100 to 450 µW. Moreover, while users are walking, the pattern of the output signal of f-TEG is compatible to a sine function with frequency close to that one of human gait. This preliminary result may represent a new way to study the movement of human body to recognize AD

Energy Harvesting and Energy Storage Systems

This book discuss the recent developments in energy harvesting and energy storage systems. Sustainable development systems are based on three pillars: economic development, environmental stewardship, and social equity. One of the guiding principles for finding the balance between these pillars is to limit the use of non-renewable energy sources

E-textile technology review - from materials to application

Wearable devices are ideal for personalized electronic applications in several domains such as healthcare, entertainment, sports and military. Although wearable technology is a growing market, current wearable devices are predominantly battery powered accessory devices, whose form factors also preclude them from utilizing the large area of the human body for spatiotemporal sensing or energy harvesting from body movements. E-textiles provide an opportunity to expand on current wearables to enable such applications via the larger surface area offered by garments, but consumer devices have been few and far between because of the inherent challenges in replicating traditional manufacturing technologies (that have enabled these wearable accessories) on textiles. Also, the powering of e-textile devices with battery energy like in wearable accessories, has proven incompatible with textile requirements for flexibility and washing. Although current e-textile research has shown advances in materials, new processing techniques, and one-off e-textile prototype devices, the pathway to industry scale commercialization is still uncertain. This paper reports the progress on the current technologies enabling the fabrication of e-textile devices and their power supplies including textile-based energy harvesters, energy storage mechanisms, and wireless power transfer solutions. It identifies factors that limit the adoption of current reported fabrication processes and devices in the industry for mass-market commercialization

Power conditioning optimization for ultra low voltage wearable thermoelectric devices using self-sustained multi-stage charge pump

Waste heat energy recovery from human body utilizing the thermoelectric generator (TEG) has shown potential in the generation of electrical energy. However, the level of heat source from the human body restricts the temperature deviation as compared to ambient temperature (approximately 3~10 °C in difference), thereby yielding an ultra-low voltage (ULV) normally less than 100 mV. This research aims at generating power from the TEG by harnessing human body temperature as the heat source to power up wearable electronic devices realizing a self-sustain system. However, power conversion of the TEG has typically low efficiency (less than 12%), requiring proper design of its power regulation system. The generated ULV marked the lowest energy conversion factor and improvement is therefore required to validate the use of ULV generated from human body temperature. This problem was addressed by proposing an improved solution to the power regulation of the ULV type TEG system based on the DC-DC converter approach, namely a multi-stage charge pump, with specifications restricted at the ULV source. Performances of the TEG connected in multiple array configurations with the generated source voltage fed into fabricated charge pump circuit to boost and regulate the voltage from the ULV into the low voltage (LV) region were analyzed. The maximum source voltage (20 mV) was referred and simulated in the LT Spice software and used as a benchmark to be compared with the voltage generated by the fabricated charge pump circuits. Error performances of the fabricated charge pump circuits were further analyzed by manipulating the circuits’ parameters, namely, the switching frequency and the capacitance values. It was found that the proposed method was able to handle the ULV source voltage with proper tuning on its component parameters. The overall power conversion efficiency of 26.25% was achieved based on the performance evaluation values for components applied in this research. Hence, this proved the viability of thermoelectric applications in ULV using the proposed power regulation system

Applications of nanogenerators for biomedical engineering and healthcare systems

The dream of human beings for long living has stimulated the rapid development of biomedical and healthcare equipment. However, conventional biomedical and healthcare devices have shortcomings such as short service life, large equipment size, and high potential safety hazards. Indeed, the power supply for conventional implantable device remains predominantly batteries. The emerging nanogenerators, which harvest micro/nanomechanical energy and thermal energy from human beings and convert into electrical energy, provide an ideal solution for self‐powering of biomedical devices. The combination of nanogenerators and biomedicine has been accelerating the development of self‐powered biomedical equipment. This article first introduces the operating principle of nanogenerators and then reviews the progress of nanogenerators in biomedical applications, including power supply, smart sensing, and effective treatment. Besides, the microbial disinfection and biodegradation performances of nanogenerators have been updated. Next, the protection devices have been discussed such as face mask with air filtering function together with real‐time monitoring of human health from the respiration and heat emission. Besides, the nanogenerator devices have been categorized by the types of mechanical energy from human beings, such as the body movement, tissue and organ activities, energy from chemical reactions, and gravitational potential energy. Eventually, the challenges and future opportunities in the applications of nanogenerators are delivered in the conclusive remarks. The combination of nanogenerator and biomedicine have been accelerating the development of self‐powered biomedical devices, which show a bright future in biomedicine and healthcare such as smart sensing, and therapy

Triboelectric Effect Enabled Self-Powered, Point-of-Care Diagnostics: Opportunities for developing ASSURED and REASSURED devices

The use of rapid point-of-care (PoC) diagnostics in conjunction with physiological signal monitoring has seen tremendous progress in their availability and uptake, particularly in low- and middle-income countries (LMICs). However, to truly overcome infrastructural and resource constraints, there is an urgent need for self-powered devices which can enable on-demand and/or continuous monitoring of patients. The past decade has seen the rapid rise of triboelectric nanogenerators (TENGs) as the choice for high-efficiency energy harvesting for developing self-powered systems as well as for use as sensors. This review provides an overview of the current state of the art of such wearable sensors and end-to-end solutions for physiological and biomarker monitoring. We further discuss the current constraints and bottlenecks of these devices and systems and provide an outlook on the development of TENG-enabled PoC/monitoring devices that could eventually meet criteria formulated specifically for use in LMICs.Ulster Universityhttp://www.mdpi.com/journal/micromachineshj2021Electrical, Electronic and Computer Engineerin

Analysis of Potential and Efficiency of Electric Generation Using Thermoelectric Effect

This research identifies the electrical potential associated with Thermoelectric Generators (TEG) under the incidence of solar rays and performs efficiency comparison using this type of devices and those photovoltaic. TEG characterization and modeling is presented to favor the estimation of the electrical potential, defined as power density (W/m2). The proper operation of thermal harvesting lays in maintaining a temperature difference of at least 26.31K between the TEG sides. With this requirement fulfilled, power conversion eficiencies of about 26.43% are obtained, higher than that of high-quality solar panels and without efficiency reductions associated with heating and soiling, while keeping the same superficial area of only 16cm 2. An estimate of at least 407.3mW corresponding to 2.44Wh of available energy is found considering specific operation hours determined statistically for a given geographic location. Thus, given such performance metric, a complete power unit is devised complementing the thermoelectric energy harvesting with a Li-Po battery to guarantee in that way a continuous operation. The total energy available from the prototype allows maintaining a battery discharge percentage of 38.05% considering the energy budget of a low-power remote sensor.MaestríaMagister en Ingeniería Electrónic

Development of Redox-Gel Electrolyte for Wearable Thermocells

The thermo-electrochemical cells (TECs, known as thermocells) provide a new potential for self-powered devices by converting heat energy into electricity through redox reactions driven by the presence of a temperature gradient. Among multiple power sources, human body heat has attracted the attention in last decades due to its continuously releasing heat energy. For harvesting body waste heat, the wearable thermocell is urgent to develop, where the gel electrolyte is the most essential component. Wearable thermocell devices could be twisted or stretched during realistic applications, therefore flexible gel-based solid-state electrolytes are the ideal candidate to avoid the leakage issue and maintain integrity while deformations. Tremendous progress has been achieved in developing flexible gel electrolytes, however, challenges are still remained in compatibility, mechanical strength and electrochemical performance. In this thesis, the primary purpose is to develop high performance gel electrolytes for wearable thermal-electrochemical cells. Initially, the suitable polymer will match the unique redox couple. Additionally, the effort should focus on improving electrochemical properties especially the issue of ion transfer limited by the gel system. Meanwhile, the mechanical strength of gel electrolytes is also needed to pursue to satisfy the movement of human limbs

Applications of nanogenerators for biomedical engineering and healthcare systems

The dream of human beings for long living has stimulated the rapid development of biomedical and healthcare equipment. However, conventional biomedical and healthcare devices have shortcomings such as short service life, large equipment size, and high potential safety hazards. Indeed, the power supply for conventional implantable device remains predominantly batteries. The emerging nanogenerators, which harvest micro/nanomechanical energy and thermal energy from human beings and convert into electrical energy, provide an ideal solution for self-powering of biomedical devices. The combination of nanogenerators and biomedicine has been accelerating the development of self-powered biomedical equipment. This article first introduces the operating principle of nanogenerators and then reviews the progress of nanogenerators in biomedical applications, including power supply, smart sensing, and effective treatment. Besides, the microbial disinfection and biodegradation performances of nanogenerators have been updated. Next, the protection devices have been discussed such as face mask with air filtering function together with real-time monitoring of human health from the respiration and heat emission. Besides, the nanogenerator devices have been categorized by the types of mechanical energy from human beings, such as the body movement, tissue and organ activities, energy from chemical reactions, and gravitational potential energy. Eventually, the challenges and future opportunities in the applications of nanogenerators are delivered in the conclusive remarks.Web of Science4

Energy harvesting technologies for structural health monitoring of airplane components - a review

With the aim of increasing the efficiency of maintenance and fuel usage in airplanes, structural health monitoring (SHM) of critical composite structures is increasingly expected and required. The optimized usage of this concept is subject of intensive work in the framework of the EU COST Action CA18203 "Optimising Design for Inspection" (ODIN). In this context, a thorough review of a broad range of energy harvesting (EH) technologies to be potentially used as power sources for the acoustic emission and guided wave propagation sensors of the considered SHM systems, as well as for the respective data elaboration and wireless communication modules, is provided in this work. EH devices based on the usage of kinetic energy, thermal gradients, solar radiation, airflow, and other viable energy sources, proposed so far in the literature, are thus described with a critical review of the respective specific power levels, of their potential placement on airplanes, as well as the consequently necessary power management architectures. The guidelines provided for the selection of the most appropriate EH and power management technologies create the preconditions to develop a new class of autonomous sensor nodes for the in-process, non-destructive SHM of airplane components.The work of S. Zelenika, P. Gljušcic, E. Kamenar and Ž. Vrcan is partly enabled by using the equipment funded via the EU European Regional Development Fund (ERDF) project no. RC.2.2.06-0001: “Research Infrastructure for Campus-based Laboratories at the University of Rijeka (RISK)” and partly supported by the University of Rijeka, Croatia, project uniri-tehnic-18-32 „Advanced mechatronics devices for smart technological solutions“. Z. Hadas, P. Tofel and O. Ševecek acknowledge the support provided via the Czech Science Foundation project GA19-17457S „Manufacturing and analysis of flexible piezoelectric layers for smart engineering”. J. Hlinka, F. Ksica and O. Rubes gratefully acknowledge the financial support provided by the ESIF, EU Operational Programme Research, Development and Education within the research project Center of Advanced Aerospace Technology (Reg. No.: CZ.02.1.01/0.0/0.0/16_019/0000826) at the Faculty of Mechanical Engineering, Brno University of Technology. V. Pakrashi would like to acknowledge UCD Energy Institute, Marine and Renewable Energy Ireland (MaREI) centre Ireland, Strengthening Infrastructure Risk Assessment in the Atlantic Area (SIRMA) Grant No. EAPA\826/2018, EU INTERREG Atlantic Area and Aquaculture Operations with Reliable Flexible Shielding Technologies for Prevention of Infestation in Offshore and Coastal Areas (FLEXAQUA), MarTera Era-Net cofund PBA/BIO/18/02 projects. The work of J.P.B. Silva is partially supported by the Portuguese Foundation for Science and Technology (FCT) in the framework of the Strategic Funding UIDB/FIS/04650/2020. M. Mrlik gratefully acknowledges the support of the Ministry of Education, Youth and Sports of the Czech Republic-DKRVO (RP/CPS/2020/003