Examination on the Denoising Methods for Electrical and Acoustic Emission Partial Discharge Signals in Oil

Partial discharge (PD) measurements either through electrical or acoustic emission approaches can be subjected to noises that arise from different sources. In this study, the examination on the denoising methods for electrical and acoustic emission PD signal is carried out. The PD was produced through needle-plane electrodes configuration. Once the voltage reached to 30 kV, the electrical and acoustic emission PD signals were recorded and additive white Gaussian noise (AWGN) was introduced. These signals were then denoised using moving average (MA), finite impulse response (FIR) low/high-pass filters, and discrete wavelet transform (DWT) methods. The denoising methods were evaluated through ratio to noise level (RNL), normalized root mean square error (NRMSE) and normalized correlation coefficient (NCC). In addition, the computation times for all denoising methods were also recorded. Based on RNL, NRMSE and NCC indexes, the performances of the denoising methods were analyzed through normalization based on the coefficient of variation (). Based on the current study, it is found that DWT performs well to denoise the electrical PD signal based on the RNL and NRMSE index while MA has a good denoising NCC and computation time index for acoustic emission PD signal

Partial discharge denoising for power cables

Partial discharge (PD) diagnostics is considered a major and effective tool for the monitoring of insulating conditions of power cables. As such, a large amount of off-line or online PD measurements have been deployed in power cables during the past decades. However, challenges still exist in PD diagnostics for power cables. Noise is one of the challenges involved in PD measurement. This thesis develops new algorithms based on the characteristics of both PD signals and noise to improve the effectiveness of wavelet-based PD denoising. In the meantime, it presents new findings in the application of empirical mode decomposition (EMD) in PD denoising. Wavelet-based technique has received high attention in the area of PD denoising, it still faces challenges, however, in wavelet selection, decomposition scale determination, and noise estimation. It is therefore the first area of interest in this thesis to improve the effectiveness of existing wavelet-based technique in PD detection by incorporating proposed algorithms. These new algorithms were developed based on the difference of entropy between transformed PD signals and noise, and the sparsity of transformed PD signals corrupted by noise. One concern commonly expressed by critics of wavelet-based technique is a pre-defined wavelet is applied in wavelet-based technique. EMD is an algorithm that can decompose a signal based on the signal itself. Thus, the second area of interest in this thesis is to further investigate the application of EMD in PD denoising; a technique that does not require the selection of a pre-defined signal to represent the "unknown" signal of interest. A new method for relative mode selection (RMS) was proposed based on the entropy of each intrinsic mode function (IMF). Although this new method cannot outperform the existing ones, it reveals that RMS is not as important as claimed in the application of EMD in signal denoising. Also, PD signals, especially those with lower magnitudes, can receive serious distortion through EMD-based denoising. Finally, comparisons between wavelet-based and EMD-based denoising were implemented in the following aspects, i.e., executing time, distortion, effectiveness, adaptivity and robustness. Results unveil that improved wavelet-based technique is more preferable as it can present better performance in PD denoising.Partial discharge (PD) diagnostics is considered a major and effective tool for the monitoring of insulating conditions of power cables. As such, a large amount of off-line or online PD measurements have been deployed in power cables during the past decades. However, challenges still exist in PD diagnostics for power cables. Noise is one of the challenges involved in PD measurement. This thesis develops new algorithms based on the characteristics of both PD signals and noise to improve the effectiveness of wavelet-based PD denoising. In the meantime, it presents new findings in the application of empirical mode decomposition (EMD) in PD denoising. Wavelet-based technique has received high attention in the area of PD denoising, it still faces challenges, however, in wavelet selection, decomposition scale determination, and noise estimation. It is therefore the first area of interest in this thesis to improve the effectiveness of existing wavelet-based technique in PD detection by incorporating proposed algorithms. These new algorithms were developed based on the difference of entropy between transformed PD signals and noise, and the sparsity of transformed PD signals corrupted by noise. One concern commonly expressed by critics of wavelet-based technique is a pre-defined wavelet is applied in wavelet-based technique. EMD is an algorithm that can decompose a signal based on the signal itself. Thus, the second area of interest in this thesis is to further investigate the application of EMD in PD denoising; a technique that does not require the selection of a pre-defined signal to represent the "unknown" signal of interest. A new method for relative mode selection (RMS) was proposed based on the entropy of each intrinsic mode function (IMF). Although this new method cannot outperform the existing ones, it reveals that RMS is not as important as claimed in the application of EMD in signal denoising. Also, PD signals, especially those with lower magnitudes, can receive serious distortion through EMD-based denoising. Finally, comparisons between wavelet-based and EMD-based denoising were implemented in the following aspects, i.e., executing time, distortion, effectiveness, adaptivity and robustness. Results unveil that improved wavelet-based technique is more preferable as it can present better performance in PD denoising

Imaging time series for the classification of EMI discharge sources

In this work, we aim to classify a wider range of Electromagnetic Interference (EMI) discharge sources collected from new power plant sites across multiple assets. This engenders a more complex and challenging classification task. The study involves an investigation and development of new and improved feature extraction and data dimension reduction algorithms based on image processing techniques. The approach is to exploit the Gramian Angular Field technique to map the measured EMI time signals to an image, from which the significant information is extracted while removing redundancy. The image of each discharge type contains a unique fingerprint. Two feature reduction methods called the Local Binary Pattern (LBP) and the Local Phase Quantisation (LPQ) are then used within the mapped images. This provides feature vectors that can be implemented into a Random Forest (RF) classifier. The performance of a previous and the two new proposed methods, on the new database set, is compared in terms of classification accuracy, precision, recall, and F-measure. Results show that the new methods have a higher performance than the previous one, where LBP features achieve the best outcome

A Wavelet Threshold Function for Treatment of Partial Discharge Measurements

Based on the wavelet transform filtering theory, the chapter will describe the elaboration of a wavelet threshold function intended for the denoising of the partial discharge phenomenon measurements. This new function, conveniently named Fleming threshold, is based on the logistic function, which is well known for its utility in several important areas. In the development is shown some variations in the application of the Fleming function, in an attempt to identify the decomposition levels where the thresholding process must be more stringent and those where it can be more lenient, which increases its effectiveness in the removal of noisy coefficients. The proposed function and its variants demonstrate excellent results compared to other wavelet thresholding methods already described in the literature, including the famous Hard and Soft functions

Underground distribution cable incipient fault diagnosis system

This dissertation presents a methodology for an efficient, non-destructive, and online incipient fault diagnosis system (IFDS) to detect underground cable incipient faults before they become catastrophic. The system provides vital information to help the operator with the decision-making process regarding the condition assessment of the underground cable. It incorporates advanced digital signal processing and pattern recognition methods to classify recorded data into designated classes. Additionally, the IFDS utilizes novel detection methodologies to detect when the cable is near failure. The classification functionality is achieved through employing an ensemble of rule-based and supervised classifiers. The Support Vector Machines, designed and used as a supervised classifier, was found to perform superior. In addition to the normalized energy features computed from wavelet packet analysis, two new features, namely Horizontal Severity Index, and Vertical Severity Index are defined and used in the classification problem. The detection functionality of the IFDS is achieved through incorporating a temporal severity measure and a detection method. The novel severity measure is based on the temporal analysis of arrival times of incipient abnormalities, which gives rise to a numeric index called the Global Severity Index (GSI). This index portrays the progressive degradation path of underground cable as catastrophic failure time approaches. The detection approach utilizes the numerical modeling capabilities of SOM as well as statistical change detection techniques. The natural logarithm of the chronologically ordered minimum modeling errors, computed from exposing feature vectors to a trained SOM, is used as the detection index. Three modified change detection algorithms, namely Cumulative Sum, Exponentially Weighted Moving Averages, and Generalized Likelihood Ratio, are introduced and applied to this application. These algorithms determine the change point or near failure time of cable from the instantaneous values of the detection index. Performance studies using field recorded data were conducted at three warning levels to assess the capability of the IFDS in predicting the faults that actually occurred in the monitored underground cable. The IFDS presents a high classification rate and satisfactory detection capability at each warning level. Specifically, it demonstrates that at least one detection technique successfully provides an early warning that a fault is imminent

Wavelet Theory

The wavelet is a powerful mathematical tool that plays an important role in science and technology. This book looks at some of the most creative and popular applications of wavelets including biomedical signal processing, image processing, communication signal processing, Internet of Things (IoT), acoustical signal processing, financial market data analysis, energy and power management, and COVID-19 pandemic measurements and calculations. The editor’s personal interest is the application of wavelet transform to identify time domain changes on signals and corresponding frequency components and in improving power amplifier behavior

Eddy current defect response analysis using sum of Gaussian methods

This dissertation is a study of methods to automatedly detect and produce approximations of eddy current differential coil defect signatures in terms of a summed collection of Gaussian functions (SoG). Datasets consisting of varying material, defect size, inspection frequency, and coil diameter were investigated. Dimensionally reduced representations of the defect responses were obtained utilizing common existing reduction methods and novel enhancements to them utilizing SoG Representations. Efficacy of the SoG enhanced representations were studied utilizing common Machine Learning (ML) interpretable classifier designs with the SoG representations indicating significant improvement of common analysis metrics

30th International Conference on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2017)

Proceedings of COMADEM 201