Towards the sequential assimilation of SAR-derived water stages into hydraulic models using the Particle Filter : proof of concept

With the onset of new satellite radar constellations (e.g. Sentinel-1) and advances in computational science (e.g. grid computing) enabling the supply and processing of multimission satellite data at a temporal frequency that is compatible with real-time flood forecasting requirements, this study presents a new concept for the sequential assimilation of Synthetic Aperture Radar (SAR)-derived water stages into coupled hydrologic-hydraulic models. The proposed methodology consists of adjusting storages and fluxes simulated by a coupled hydrologic-hydraulic model using a Particle Filterbased data assimilation scheme. Synthetic observations of water levels, representing satellite measurements, are assimilated into the coupled model in order to investigate the performance of the proposed assimilation scheme as a function of both accuracy and frequency of water level observations. The use of the Particle Filter provides flexibility regarding the form of the probability densities of both model simulations and remote sensing observations. We illustrate the potential of the proposed methodology using a twin experiment over a widely studied river reach located in the Grand-Duchy of Luxembourg. The study demonstrates that the Particle Filter algorithm leads to significant uncertainty reduction of water level and discharge at the time step of assimilation. However, updating the storages of the model only improves the model forecast over a very short time horizon. A more effective way of updating thus consists in adjusting both states and inputs. The proposed methodology, which consists in updating the biased forcing of the hydraulic model using information on model errors that is inferred from satellite observations, enables persistent model improvement. The present schedule of satellite radar missions is such that it is likely that there will be continuity for SAR-based operational water management services. This research contributes to evolve reactive flood management into systematic or quasi-systematic SAR-based flood monitoring services

Assimilating SAR-derived water level data into a hydraulic model: a case study

Satellite-based active microwave sensors not only provide synoptic overviews of flooded areas, but also offer an effective way to estimate spatially distributed river water levels. If rapidly produced and processed, these data can be used for updating hydraulic models in near real-time. The usefulness of such approaches with real event data sets provided by currently existing sensors has yet to be demonstrated. In this case study, a Particle Filter-based assimilation scheme is used to integrate ERS-2 SAR and ENVISAT ASAR-derived water level data into a one-dimensional (1-D) hydraulic model of the Alzette River. Two variants of the Particle Filter assimilation scheme are proposed with a global and local particle weighting procedure. The first option finds the best water stage line across all cross sections, while the second option finds the best solution at individual cross sections. The variant that is to be preferred depends on the level of confidence that is attributed to the observations or to the model. The results show that the Particle Filter-based assimilation of remote sensing-derived water elevation data provides a significant reduction in the uncertainty at the analysis step. Moreover, it is shown that the periodical updating of hydraulic models through the proposed assimilation scheme leads to an improvement of model predictions over several time steps. However, the performance of the assimilation depends on the skill of the hydraulic model and the quality of the observation data

The potential of flood forecasting using a variable-resolution global Digital Terrain Model and flood extents from Synthetic Aperture Radar images

A basic data requirement of a river flood inundation model is a Digital Terrain Model (DTM) of the reach being studied. The scale at which modeling is required determines the accuracy required of the DTM. For modeling floods in urban areas, a high resolution DTM such as that produced by airborne LiDAR (Light Detection And Ranging) is most useful, and large parts of many developed countries have now been mapped using LiDAR. In remoter areas, it is possible to model flooding on a larger scale using a lower resolution DTM, and in the near future the DTM of choice is likely to be that derived from the TanDEM-X Digital Elevation Model (DEM). A variable-resolution global DTM obtained by combining existing high and low resolution data sets would be useful for modeling flood water dynamics globally, at high resolution wherever possible and at lower resolution over larger rivers in remote areas. A further important data resource used in flood modeling is the flood extent, commonly derived from Synthetic Aperture Radar (SAR) images. Flood extents become more useful if they are intersected with the DTM, when water level observations (WLOs) at the flood boundary can be estimated at various points along the river reach. To illustrate the utility of such a global DTM, two examples of recent research involving WLOs at opposite ends of the spatial scale are discussed. The first requires high resolution spatial data, and involves the assimilation of WLOs from a real sequence of high resolution SAR images into a flood model to update the model state with observations over time, and to estimate river discharge and model parameters, including river bathymetry and friction. The results indicate the feasibility of such an Earth Observation-based flood forecasting system. The second example is at a larger scale, and uses SAR-derived WLOs to improve the lower-resolution TanDEM-X DEM in the area covered by the flood extents. The resulting reduction in random height error is significant

Enhanced flood mapping using synthetic aperture radar (SAR) images, hydraulic modelling, and social media: A case study of Hurricane Harvey (Houston, TX)

n/

On the use of global flood forecasts and satellite-derived inundation maps for flood monitoring in data-sparse regions

Early flood warning and real-time monitoring systems play a key role in flood risk reduction and disaster response decisions. Global-scale flood forecasting and satellite-based flood detection systems are currently operating, however their reliability for decision making applications needs to be assessed. In this study, we performed comparative evaluations of several operational global flood forecasting and flood detection systems, using 10 major flood events recorded over 2012-2014. Specifically, we evaluated the spatial extent and temporal characteristics of flood detections from the Global Flood Detection System (GFDS) and the Global Flood Awareness System (GloFAS). Furthermore, we compared the GFDS flood maps with those from NASA’s two Moderate Resolution Imaging Spectroradiometer (MODIS) sensors. Results reveal that: 1) general agreement was found between the GFDS and MODIS flood detection systems, 2) large differences exist in the spatio-temporal characteristics of the GFDS detections and GloFAS forecasts, and 3) the quantitative validation of global flood disasters in data-sparse regions is highly challenging. Overall, the satellite remote sensing provides useful near real-time flood information that can be useful for risk management. We highlight the known limitations of global flood detection and forecasting systems, and propose ways forward to improve the reliability of large scale flood monitoring tools.JRC.H.7-Climate Risk Managemen

Flood Prediction and Mitigation in Data-Sparse Environments

In the last three decades many sophisticated tools have been developed that can accurately predict the dynamics of flooding. However, due to the paucity of adequate infrastructure, this technological advancement did not benefit ungauged flood-prone regions in the developing countries in a major way. The overall research theme of this dissertation is to explore the improvement in methodology that is essential for utilising recently developed flood prediction and management tools in the developing world, where ideal model inputs and validation datasets do not exist. This research addresses important issues related to undertaking inundation modelling at different scales, particularly in data-sparse environments. The results indicate that in order to predict dynamics of high magnitude stream flow in data-sparse regions, special attention is required on the choice of the model in relation to the available data and hydraulic characteristics of the event. Adaptations are necessary to create inputs for the models that have been primarily designed for areas with better availability of data. Freely available geospatial information of moderate resolution can often meet the minimum data requirements of hydrological and hydrodynamic models if they are supplemented carefully with limited surveyed/measured information. This thesis also explores the issue of flood mitigation through rainfall-runoff modelling. The purpose of this investigation is to assess the impact of land-use changes at the sub-catchment scale on the overall downstream flood risk. A key component of this study is also quantifying predictive uncertainty in hydrodynamic models based on the Generalised Likelihood Uncertainty Estimation (GLUE) framework. Detailed uncertainty assessment of the model outputs indicates that, in spite of using sparse inputs, the model outputs perform at reasonably low levels of uncertainty both spatially and temporally. These findings have the potential to encourage the flood managers and hydrologists in the developing world to use similar data sets for flood management

The impact of uncertainty in satellite data on the assessment of flood inundation models

The performance of flood inundation models is often assessed using satellite observed data; however these data have inherent uncertainty. In this study we assess the impact of this uncertainty when calibrating a flood inundation model (LISFLOOD-FP) for a flood event in December 2006 on the River Dee, North Wales, UK. The flood extent is delineated from an ERS-2 SAR image of the event using an active contour model (snake), and water levels at the flood margin calculated through intersection of the shoreline vector with LiDAR topographic data. Gauged water levels are used to create a reference water surface slope for comparison with the satellite-derived water levels. Residuals between the satellite observed data points and those from the reference line are spatially clustered into groups of similar values. We show that model calibration achieved using pattern matching of observed and predicted flood extent is negatively influenced by this spatial dependency in the data. By contrast, model calibration using water elevations produces realistic calibrated optimum friction parameters even when spatial dependency is present. To test the impact of removing spatial dependency a new method of evaluating flood inundation model performance is developed by using multiple random subsamples of the water surface elevation data points. By testing for spatial dependency using Moran’s I, multiple subsamples of water elevations that have no significant spatial dependency are selected. The model is then calibrated against these data and the results averaged. This gives a near identical result to calibration using spatially dependent data, but has the advantage of being a statistically robust assessment of model performance in which we can have more confidence. Moreover, by using the variations found in the subsamples of the observed data it is possible to assess the effects of observational uncertainty on the assessment of flooding risk

Multisensor systems and flood risk management. Application to the Danube Delta using radar and hyperspectral imagery

International audienceAt the beginning of the 21st century, flood risk still represents a major world threat ( 60% of natural disasters are initiated by storms ) and the climate warming might even accentuate this phenomenon in the future. In Europe, despite all the policies in place and the measures taken during the past decades, large floods have occurred almost every year. The news regularly confirms this reality and the serious threat posed by flood risks in Europe. This paper presents an application to the Danube Delta exploiting radar imagery ENVISAT/ASAR and hyperspectral imagery CHRIS/PROBA for mapping flooded and floodable areas during the events of spring 2006. The uses of multisensor systems, such as radar and hyperspectral imagers, contribute to a better comprehension of floods in this wetland, their impacts, and risk management and sustainable development in the delta. In the section Risk management, this paper approaches the methodological aspects related to the characterization of the flood hazard whereas in the section Forecasting we will focus on the knowledge and modeling of the Land cover. The method of kernels, particularly adapted to the highlighting of the special-temporal variations - Support Vector Machine - and the methods based on the principle of the vague logic ( object-oriented classifications ) will be implemented so as to obtain the information plan of the spatial data.En ce début de 21e siècle, le risque d'inondation constitue encore le risque majeur au monde ( avec les tempêtes, les inondations représentent 60% des catastrophes naturelles ) et le réchauffement climatique pourrait encore renforcer ce phénomène à l'avenir. En Europe, malgré toutes les politiques et les mesures prises, au cours des dernières décennies, de grandes inondations ont lieu quasiment chaque année. Les actualités confirment régulièrement la réalité et la prégnance du risque d'inondation en Europe. Cet article présente une application concernant le risque d'inondation durant les événements du printemps 2006 dans le delta du Danube en exploitant des images radar ENVISAT/ASAR et l'imagerie hyperspectrale CHRIS/PROBA en matière d'analyse et de cartographie des zones inondées et de la classe de l'inondable. L'utilisation couplée des techniques spatiales ( radar et hyperspectrale ) pourrait contribuer à une meilleure compréhension des phénomènes liés aux inondations dans le Delta du Danube, ainsi qu'à la gestion de ce risque dans le delta et à son développement durable. Dans la partie Gestion du risque, ce travail aborde des aspects méthodologiques liés à la caractérisation de l'aléa de l'inondation tandis que dans la partie Prévision, la connaissance et la modélisation de l'Occupation du sol seront abordés. Des méthodes des noyaux ( kernels ), adaptées en particulier à la mise en évidence des variations spatio-temporelles - Suport Vector Machine - ainsi que des méthodes basées sur le principe de la logique floue ( classifications orientées objet ) sont mis en place afin d'obtenir le plan d'information des données spatiales