12 research outputs found
Améliorations des transmissions VLC (Visible Light Communication) sous contrainte d'éclairage : études théoriques et expérimentations
Abstract : Indoor visible light communication (VLC) networks based on light-emitting diodes (LEDs)
currently enjoy growing interest thanks in part to their robustness against interference,
wide license-free available bandwidth, low cost, good energy efficiency and compatibility
with existing lighting infrastructure. In this thesis, we investigate spectral-efficient modulation
techniques for the physical layer of VLC to increase throughput while considering
the quality of illumination as well as implementation costs. Numerical and experimental
studies are performed employing pulse amplitude modulation (PAM) and carrierless amplitude
and phase (CAP) modulation under illumination constraints and for high modulation
orders. Furthermore, the impact of LED nonlinearity is investigated and a postdistortion
technique is evaluated to compensate these nonlinear effects. Within this framework,
transmission rates in the order of a few hundred Mb/s are achieved using a test bench made
of low-cost components. In addition, an imaging multiple input multiple-output (MIMO)
system is developed and the impact on performance of imaging lens misalignment is theoretically
and numerically assessed. Finally, a polynomial matrix decomposition technique
based on the classical LU factorization method is studied and applied for the first time to
MIMO VLC systems in large space indoor environments.Les réseaux de communication en lumière visible (VLC) s’appuyant sur l’utilisation de diodes électroluminescentes (LED) bénéficient actuellement d’un intérêt grandissant, en partie grâce à leur robustesse face aux interférences électromagnétiques, leur large bande disponible non-régulée, leur faible coût, leur bonne efficacité énergétique, ainsi que leur compatibilité avec les infrastructures d’éclairage déjà existantes. Dans cette thèse, nous étudions des techniques de modulation à haute efficacité spectrale pour la couche physique des VLC pour augmenter les débits tout en considérant la qualité de l’éclairage ainsi que les coûts d’implémentation. Des études numériques et expérimentales sont réalisées sur la modulation d’impulsion d’amplitude (PAM) et sur la modulation d’amplitude et de phase sans porteuse (CAP) sous des contraintes d’éclairage et pour des grands ordres de modulation. De plus, l’impact des non-linéarités de la LED est étudié et une technique de post-distorsion est évaluée pour corriger ces effets non-linéaires. Dans ce cadre, des débits de plusieurs centaines de Mb/s sont atteints en utilisant un banc de test réalisé à partir de composants à bas coûts. Par ailleurs, un système multi-entrées multi-sorties (MIMO) imageant est également développé et l’impact du désaxage de l’imageur sur les performances est étudié. Finalement, une technique de décomposition polynomiale basée sur la méthode de factorisation classique LU est étudiée et appliquée aux systèmes MIMO VLC dans des grands espaces intérieurs
A review of gallium nitride LEDs for multi-gigabit-per-second visible light data communications
The field of visible light communications (VLC) has gained significant interest over the last decade, in both fibre and free-space embodiments. In fibre systems, the availability of low cost plastic optical fibre (POF) that is compatible with visible data communications has been a key enabler. In free-space applications, the availability of hundreds of THz of the unregulated spectrum makes VLC attractive for wireless communications. This paper provides an overview of the recent developments in VLC systems based on gallium nitride (GaN) light-emitting diodes (LEDs), covering aspects from sources to systems. The state-of-the-art technology enabling bandwidth of GaN LEDs in the range of >400 MHz is explored. Furthermore, advances in key technologies, including advanced modulation, equalisation, and multiplexing that have enabled free-space VLC data rates beyond 10 Gb/s are also outlined
A Survey on Recent Advances in Organic Visible Light Communications
Visible light communication (VLC) employs light emitting diodes (LEDs) to provide illumination and data communications simultaneously. Organic LEDs (OLEDs) employing small molecules and long-chain polymers PLEDs, have been gaining attention within the VLC research community due to their inherent advantages such as flexible substrates and low-cost manufacturing. However, the carrier mobility of organic semiconductors is much slower than the devices composed of metal alloys, such as gallium nitride, thus leading to a restriction in the OLED modulation bandwidth. The manufacturing processes, materials and the photoactive size of the devices can affect the raw bandwidth of OLEDs. To increase the transmission speeds, novel approaches have been proposed including equalization techniques, signalling schemes and the optimum driver circuits. The paper provides a survey on the evolution of OLED-based VLC systems, and the respective challenges and recent progresses
Visible Light Communications for Indoor Applications
The field of visible light communications (VLC) has undergone a rapid development in
recent years. The increased utilization of light emitting diodes (LEDs) has opened new
possibilities for especially indoor services such as broadband internet connection and po-
sitioning. Thus, a research within VLC is the main focus of the thesis and is divided into
two main parts. At rst, the multiband carrier-less amplitude and phase (m-CAP) mod-
ulation, introducing a newly adopted format for spectrally e cient VLC links, is under
investigation using both theoretical and experimental approaches. The recommendations
for m-CAP transmitter site design are proposed. Next, the channel modeling of indoor
VLC is investigated with emphasis on the dynamically changing environments caused by
moving people and non-line of sight (NLOS) propagation and new statistical models are
derived.Katedra elektromagnetického pol
Hybrid Free-Space Optical and Visible Light Communication Link
V součastnosti bezdrátové optické komunikace (optical wireless communication, OWC) získávají širokou pozornost jako vhodný doplněk ke komunikačním přenosům v rádiovém pásmu. OWC nabízejí několik výhod včetně větší šířky přenosového pásma, neregulovaného frekvenčního pásma či odolnosti vůči elektromagnetickému rušení. Tato práce se zabývá návrhem OWC systémů pro připojení koncových uživatelů. Samotná realizace spojení může být provedena za pomoci různých variant bezdrátových technologií, například pomocí OWC, kombinací různých OWC technologií nebo hybridním rádio-optickým spojem. Za účelem propojení tzv. poslední míle je analyzován optický bezvláknový spoj (free space optics, FSO). Tato práce se dále zabývá analýzou přenosových vlastností celo-optického více skokového spoje s důrazem na vliv atmosférických podmínek. V dnešní době mnoho uživatelů tráví čas ve vnitřních prostorech kanceláří či doma, kde komunikace ve viditelném spektru (visible light communication, VLC) poskytuje lepší přenosové parametry pokrytí než úzce směrové FSO. V rámci této práce byla odvozena a experimentálně ověřena závislost pro bitovou chybovost přesměrovaného (relaying) spoje ve VLC. Pro propojení poskytovatele datavých služeb s koncovým uživatelem může být výhodné zkombinovat více přenosových technologií. Proto je navržen a analyzovám systém pro překonání tzv. problému poslední míle a posledního metru kombinující hybridní FSO a VLC technologie.The field of optical wireless communications (OWC) has recently attracted significant attention as a complementary technology to radio frequency (RF). OWC systems offer several advantages including higher bandwidth, an unregulated spectrum, resistance to electromagnetic interference and a high order of reusability. The thesis focuses on the deployment and analyses of end-user interconnections using the OWC systems. Interconnection can be established by many wireless technologies, for instance, by a single OWC technology, a combination of OWC technologies, or by hybrid OWC/RF links. In order to establish last mile outdoor interconnection, a free-space optical (FSO) has to be investigated. In this thesis, the performance of all-optical multi-hop scenarios is analyzed under atmospheric conditions. However, nowadays, many end users spend much time in indoor environments where visible light communication (VLC) technology can provide better transmission parameters and, significantly, better coverage. An analytical description of bit error rate for relaying VLC schemes is derived and experimentally verified. Nonetheless, for the last mile, interconnection of a provider and end users (joint outdoor and indoor connection) can be advantageous when combining multiple technologies. Therefore, a hybrid FSO/VLC system is proposed and analyzed for the interconnection of the last mile and last meter bottleneck
Recommended from our members
High Speed Optical Links Using CAP Modulation and Novel Equalisation Techniques
High speed optical links suffer from inter-symbol-interference (ISI) due to their limited bandwidth. Equalisation is typically used to mitigate ISI and therefore improve the link capacity. This dissertation explores novel equalisation techniques for carrierless amplitude and phase (CAP) modulation based optical communication systems including OM4 based and plastic optical fibre (POF) based links.
An 850 nm VCSEL based OM4 link using CAP-16 scheme is studied. For the first time, the CAP equaliser, is proposed to mitigate both crosstalk channel interference (CCI) and ISI in the link at the receiver side. Performance comparisons are studied between the CAP-16 scheme using CAP equaliser and a conventional equaliser, pulse amplitude modulation (PAM-4) scheme, and discrete multitone (DMT) scheme. CAP based data transmission of 112 Gb/s is achieved over 150 m OM4 fibre with this novel equaliser, while the conventional equaliser can only support over 1 m OM4 fibre and fails to recover the signals at the same data rate. In addition, this novel equaliser provides a 1.2 dB and 1.7 dB improvement in receiver sensitivity over PAM-4 and DMT schemes, respectively, at 112 Gb/s over 100 m OM4 fibre. A novel pre-CAP-equaliser solving CCI at the transmitter side is also proposed. Data transmission of 56 Gb/s over 100 m OM4 fibre is reported experimentally with an improvement of 0.7 dB in receiver sensitivity compared to using the CAP equaliser at the receiver side. A simulation study shows a 2 dB improvement in receiver sensitivity at 112 Gb/s over 100 m OM4 fibre. Furthermore, an artificial neural network (ANN) equaliser in conjunction with the CAP equaliser structure is explored in a VCSEL based OM4 fibre link in order to further mitigate the nonlinear impairments. For 112 Gb/s data transmission over 100 m OM4 fibre, a 2.4 dB improvement of receiver sensitivity is achieved compared to the CAP equaliser.
In addition to the electrical equalisers, a monolithically integrated silicon optical equaliser consisting of three taps is used for 50 Gb/s data transmission. After 10 km standard single mode fibre (SSMF), error free eye diagrams at the receiver are demonstrated.
A μLED based POF link based on an APD receiver is also investigated with the CAP equaliser at the receiver side. Data transmission rates of 4 Gb/s over 25 m and 5 Gb/s over 10 m POF links are demonstrated with this equaliser while the conventional equaliser can only support 4 Gb/s over 10 m and fails to recover the signals for 5 Gb/s data transmission
Enhanced carrierless amplitude and phase modulation for optical communication systems
This thesis develops and investigates enhanced techniques for carrierless amplitude and phase
modulation (CAP) in optical communication systems. The CAP scheme is studied as the
physical layer modulation technique due to its implementation simplicity and versatility, that
enables its implementation as a single carrier (CAP) or multi-carrier technique (m-CAP).
The effect of timing jitter on the error performance of CAP is first investigated. The
investigation indicates that synchronization is a critical requirement for CAP receiver and as
a result, a novel low-complexity synchronization algorithm is developed with experimental
demonstration for CAP-based visible light communication (VLC) systems. To further reduce
the overall link complexity, a fractionally-spaced equalizer (FSE) is considered to mitigate the
effects of inter-symbol interference (ISI) and timing jitter. The FSE implementation, which
eliminates the need for a separate synchronization block, is shown through simulation and
VLC experimental demonstration to outperform symbol-spaced equalizers (SSE) that are
reported in literature for CAP-based VLC systems.
Furthermore, in this thesis, spectrally-efficient index modulation techniques are developed for
CAP. The proposed techniques can be divided into two broad groups, namely spatial index CAP
(S-CAP) and subband index CAP (SI-CAP). The proposed spatial index techniques leverage
the fact that in VLC, multiple optical sources are often required. The spatial CAP (S-CAP)
transmits CAP signal through one of Nt available LEDs. It is developed to reduce equalization
requirement and improve the spectral efficiency of the conventional CAP. In addition to the bits
transmitted through the CAP symbol, the S-CAP encodes additional bits on the indexing/spatial
location of the LEDs. The generalised S-CAP (GS-CAP) is further developed to relax the
S-CAP limitation of using a single LED per symbol duration. In addition to the S-CAP scheme,
multiple-input multiple-output (MIMO) techniques of repetitive-coded CAP (RC-CAP) and
spatial multiplexing CAP (SMux-CAP) are investigated for CAP. Low-complexity detectors
are also developed for the MIMO schemes. A key challenge of the MIMO schemes is that they
suffer power penalty when channel gains are similar, which occur when the optical sources are
closely located. The use of multiple receivers and power factor imbalance (PFI) techniques
are proposed to mitigate this power penalty. The techniques result in significant improvement
in the power efficiency of the MIMO schemes and ensure that the spectral efficiency gain is
obtained with little power penalty.
Finally, subband index CAP (SI-CAP) is developed to improve the spectral efficiency of
m-CAP and reduce its peak-to-average power ratio (PAPR). The SI-CAP encodes additional
information bits on the selection of ‘active’ subbands of m-CAP and only modulate data
symbols on these ‘active’ subbands. The error performance of the proposed SI-CAP is
evaluated analytically and verified with computer-based simulations. The SI-CAP technique is
also experimented for both VLC and step-index plastic optical fibre (SI-POF) communication
links. The experimental results show that for a fixed power efficiency, SI-CAP achieves higher
data rate compared tom-CAP. For example, at a representative bit error rate (BER) of 10-5, the
SI-CAP achieves a data rate and power efficiency gain of 26:5 Mb/s and 2:5 dB, respectively
when compared to m-CAP. In addition, an enhanced SI-CAP (eSI-CAP) is developed to
address the complexity that arises in SI-CAP at higher modulation order. The results of the
experimental demonstrations in VLC and 10 m SI-POF link shows that when compared with
m-CAP, eSI-CAP consistently yields a data rate improvement of between 7% and 13% for
varying values of the SNR
Spectrum and energy efficient digital modulation techniques for practical visible light communication systems
The growth in mobile data traffic is rapidly increasing in an unsustainable direction
given the radio frequency (RF) spectrum limits. Visible light communication (VLC)
offers a lucrative solution based on an alternative license-free frequency band that is safe
to use and inexpensive to utilize. Improving the spectral and energy efficiency of intensity
modulation and direct detection (IM/DD) systems is still an on-going challenge in
VLC. The energy efficiency of inherently unipolar modulation techniques such as pulse-amplitude
modulation discrete multitone modulation (PAM-DMT) and asymmetrically
clipped optical orthogonal frequency division multiplexing (ACO-OFDM) degrades at
high spectral efficiency. Two novel superposition modulation techniques are proposed
in this thesis based on PAM-DMT and ACO-OFDM. In addition, a practical solution
based on the computationally efficient augmented spectral efficiency discrete multi-tone
(ASE-DMT) is proposed. The system performance of the proposed superposition
modulation techniques offers significant electrical and optical power savings with up
to 8 dB in the electrical signal-to-noise ratio (SNR) when compared with DC-biased
optical orthogonal frequency division multiplexing (DCO-OFDM). The theoretical bit
error ratio (BER) performance bounds for all of the proposed modulation techniques
are in agreement with the Monte-Carlo simulation results. The proposed superposition
modulation techniques are promising candidates for spectrum and energy efficient
IM/DD systems.
Two experimental studies are presented for a VLC system based on DCO-OFDM with
adaptive bit and energy loading. Micrometer-sized Gallium Nitride light emitting
diode (m-LED) and light amplification by stimulated emission of radiation diode (LD)
are used in these studies due to their high modulation bandwidth. Record data rates are
achieved with a BER below the forward error correction (FEC) threshold at 7.91 Gb/s
using the violet m-LED and at 15 Gb/s using the blue LD. These results highlight
the potential of VLC systems in practical high speed communication solutions. An
additional experimental study is demonstrated for the proposed superposition modulation
techniques based on ASE-DMT. The experimentally achieved results confirm the
theoretical and simulation based performance predictions of ASE-DMT. A significant
gain of up to 17.33 dB in SNR is demonstrated at a low direct current (DC) bias.
Finally, the perception that VLC systems cannot work under the presence of sunlight is
addressed in this thesis. A complete framework is presented to evaluate the performance
of VLC systems in the presence of solar irradiance at any given location and time. The
effect of sunlight is investigated in terms of the degradations in SNR, data rate and
BER. A reliable high speed communication system is achieved under the sunlight
effect. An optical bandpass blue filter is shown to compensate for half of the reduced
data rate in the presence of sunlight. This thesis demonstrates data rates above 1 Gb/s
for a practical VLC link under strong solar illuminance measured at 50350 lux in clear
weather conditions
High speed energy efficient incoherent optical wireless communications
The growing demand for wireless communication capacity and the overutilisation of the conventional
radio frequency (RF) spectrum have inspired research into using alternative spectrum
regions for communication. Using optical wireless communications (OWC), for example, offers
significant advantages over RF communication in terms of higher bandwidth, lower implementation
costs and energy savings. In OWC systems, the information signal has to be
real and non-negative. Therefore, modifications to the conventional communication algorithms
are required. Multicarrier modulation schemes like orthogonal frequency division multiplexing
(OFDM) promise to deliver a more efficient use of the communication capacity through adaptive
bit and energy loading techniques. Three OFDM-based schemes – direct-current-biased OFDM
(DCO-OFDM), asymmetrically clipped optical OFDM(ACO-OFDM), and pulse-amplitude modulated
discrete multitone (PAM-DMT) – have been introduced in the literature.
The current work investigates the recently introduced scheme subcarrier-index modulation OFDM
as a potential energy-efficient modulation technique with reduced peak-to-average power ratio
(PAPR) suitable for applications in OWC. A theoretical model for the analysis of SIM-OFDMin a
linear additive white Gaussian noise (AWGN) channel is provided. A closed-form solution for the
PAPR in SIM-OFDM is also proposed. Following the work on SIM-OFDM, a novel inherently
unipolar modulation scheme, unipolar orthogonal frequency division multiplexing (U-OFDM), is
proposed as an alternative to the existing similar schemes: ACO-OFDMand PAM-DMT. Furthermore,
an enhanced U-OFDMsignal generation algorithm is introduced which allows the spectral
efficiency gap between the inherently unipolar modulation schemes – U-OFDM, ACO-OFDM,
PAM-DMT – and the conventionally used DCO-OFDM to be closed. This results in an OFDM-based
modulation approach which is electrically and optically more efficient than any other
OFDM-based technique proposed so far for intensity modulation and direct detection (IM/DD)
communication systems.
Non-linear distortion in the optical front-end elements is one of the major limitations for high-speed
communication in OWC. This work presents a generalised approach for analysing nonlinear
distortion in OFDM-based modulation schemes. The presented technique leads to a closed-form
analytical solution for an arbitrary memoryless distortion of the information signal and has
been proven to work for the majority of the known unipolar OFDM-based modulation techniques
- DCO-OFDM, ACO-OFDM, PAM-DMT and U-OFDM.
The high-speed communication capabilities of novel Gallium Nitride based μm-sized light emitting
diodes (μLEDs) are investigated, and a record-setting result of 3.5Gb/s using a single 50-μm
device is demonstrated. The capabilities of using such devices at practical transmission distances
are also investigated, and a 1 Gb/s link using a single device is demonstrated at a distance of up
to 10m. Furthermore, a proof-of-concept experiment is realised where a 50-μm LED is successfully
modulated using U-OFDM and enhanced U-OFDM to achieve notable energy savings in
comparison to DCO-OFDM