Visual Importance-based Cross-layer 3D Model Streaming over Lossy Network

AbstractThis paper proposes a visual importance-based cross-layer 3D model streaming method over lossy network. Before the transmission, we build an important criterion for each packet of a 3D model from the aspect of rendering dependence among packets. Thus, each packet will have a rendering importance value. And then, the progressive model is streamed by the modified protocol based on a cross-layer optimization. In this optimization method, we will use the unequal FEC and Mac_Lite protocol guided by the rendering importance value of each packet. The simulation result demonstrates our method's effectiveness

Mobile three-dimensional city maps

Maps are visual representations of environments and the objects within, depicting their spatial relations. They are mainly used in navigation, where they act as external information sources, supporting observation and decision making processes. Map design, or the art-science of cartography, has led to simplification of the environment, where the naturally three-dimensional environment has been abstracted to a two-dimensional representation, populated with simple geometrical shapes and symbols. However, abstract representation requires a map reading ability. Modern technology has reached the level where maps can be expressed in digital form, having selectable, scalable, browsable and updatable content. Maps may no longer even be limited to two dimensions, nor to an abstract form. When a real world based virtual environment is created, a 3D map is born. Given a realistic representation, would the user no longer need to interpret the map, and be able to navigate in an inherently intuitive manner? To answer this question, one needs a mobile test platform. But can a 3D map, a resource hungry real virtual environment, exist on such resource limited devices? This dissertation approaches the technical challenges posed by mobile 3D maps in a constructive manner, identifying the problems, developing solutions and providing answers by creating a functional system. The case focuses on urban environments. First, optimization methods for rendering large, static 3D city models are researched and a solution provided by combining visibility culling, level-of-detail management and out-of-core rendering, suited for mobile 3D maps. Then, the potential of mobile networking is addressed, developing efficient and scalable methods for progressive content downloading and dynamic entity management. Finally, a 3D navigation interface is developed for mobile devices, and the research validated with measurements and field experiments. It is found that near realistic mobile 3D city maps can exist in current mobile phones, and the rendering rates are excellent in 3D hardware enabled devices. Such 3D maps can also be transferred and rendered on-the-fly sufficiently fast for navigation use over cellular networks. Real world entities such as pedestrians or public transportation can be tracked and presented in a scalable manner. Mobile 3D maps are useful for navigation, but their usability depends highly on interaction methods - the potentially intuitive representation does not imply, for example, faster navigation than with a professional 2D street map. In addition, the physical interface limits the usability

HIGH-PERFORMANCE PERIODIC ANTENNAS WITH HIGH ASPECT RATIO VERTICAL FEATURES AND LARGE INTERCELL CAPACITANCES FOR MICROWAVE APPLICATIONS

Modern communications systems are evolving rapidly to address the demand for data exchange, a fact which imposes stringent requirements on the design process of their RF and antenna front-ends. The most crucial pressure on the antenna front-end is the need for miniaturized design solutions while maintaining the desired radiation performance. To satisfy this need, this thesis presents innovative types of periodic antennas, including electromagnetic bandgap (EBG) antennas, which are distinguished in two respects. First, the periodic cells contain thick metal traces, contrary to the conventional thin-trace cells. Second, such thick traces contain very narrow gaps with very tall sidewalls, referred to as high aspect ratio (HAR) gaps. When such cells are used in the structure of the proposed periodic antennas, the high capacitance of HAR gaps decreases the resonance frequency, mitigates conduction loss, and thus, yields considerably small high efficiency antennas. For instance, one of the sample antenna designs with only two EBG cells offers a very small XYZ volume of 0.25λ×0.28λ×0.037λ with efficiency of 83%. Also, a circularly polarized HAR EBG antenna is presented which has a footprint as small as 0.26λ×0.29λ and efficiency as high as 94%. The main analysis method developed in this thesis is a combination of numerical and mathematical analyses and is referred to as HFSS/Bloch method. The numerical part of this method is conducted using a High Frequency Structure Simulator (HFSS), and the mathematical part is based on the classic Bloch theory. The HFSS/Bloch method acts as the mainstay of the thesis and all designs are built upon the insight provided by this method. A circuit model using transmission line (TL) theory is also developed for some of the unit cells and antennas. The HFSS/Bloch perspective results in a HAR EBG TL with radiation properties, a fragment of which (2 to 6 cells) is introduced as a novel antenna, the self-excited EBG resonator antenna (SE-EBG-RA). Open (OC) and short circuited (SC) versions of this antenna are studied and the inherently smaller size of the SC version is demonstrated. Moreover, the possibility of employing the SE-EBG-RA as the element of a series-fed array structure is investigated and some sample high-efficiency, flat array antennas are rendered. A microstrip antenna is also developed, the structure of which is composed of 3×3 unit cells and shows fast-wave behaviors. Most antenna designs are resonant in nature; however, in one case, a low-profile efficient leaky-wave antenna with scanning radiation pattern is proposed. Several antenna prototypes are fabricated and tested to validate the analyses and designs. As the structures are based on tall metal traces, two relevant fabrication methods are considered, including CNC machining and deep X-ray lithography (DXRL). Hands-on experiments provide an outlook of possible future DXRL fabricated SE-EBG-RAs

Beam scanning by liquid-crystal biasing in a modified SIW structure

A fixed-frequency beam-scanning 1D antenna based on Liquid Crystals (LCs) is designed for application in 2D scanning with lateral alignment. The 2D array environment imposes full decoupling of adjacent 1D antennas, which often conflicts with the LC requirement of DC biasing: the proposed design accommodates both. The LC medium is placed inside a Substrate Integrated Waveguide (SIW) modified to work as a Groove Gap Waveguide, with radiating slots etched on the upper broad wall, that radiates as a Leaky-Wave Antenna (LWA). This allows effective application of the DC bias voltage needed for tuning the LCs. At the same time, the RF field remains laterally confined, enabling the possibility to lay several antennas in parallel and achieve 2D beam scanning. The design is validated by simulation employing the actual properties of a commercial LC medium

Design and Implementation of System Components for Radio Frequency Based Asset Tracking Devices to Enhance Location Based Services. Study of angle of arrival techniques, effects of mutual coupling, design of an angle of arrival algorithm, design of a novel miniature reconfigurable antenna optimised for wireless communication systems

The angle of arrival estimation of multiple sources plays a vital role in the field of array signal processing as MIMO systems can be employed at both the transmitter and the receiver end and the system capacity, reliability and throughput can be significantly increased by using array signal processing. Almost all applications require accurate direction of arrival (DOA) estimation to localize the sources of the signals. Another important parameter of localization systems is the array geometry and sensor design which can be application specific and is used to estimate the DOA. In this work, various array geometries and arrival estimation algorithms are studied and then a new scheme for multiple source estimation is proposed and evaluated based on the performance of subspace and non-subspace decomposition methods. The proposed scheme has shown to outperform the conventional Multiple Signal Classification (MUSIC) estimation and Bartlett estimation techniques. The new scheme has a better performance advantage at low and high signal to noise ratio values (SNRs). The research work also studies different array geometries for both single and multiple incident sources and proposes a geometry which is cost effective and efficient for 3, 4, and 5 antenna array elements. This research also considers the shape of the ground plane and its effects on the angle of arrival estimation and in addition it shows how the mutual couplings between the elements effect the overall estimation and how this error can be minimised by using a decoupling matrix. At the end, a novel miniaturised multi element reconfigurable antenna to represent the receiver base station is designed and tested. The antenna radiation patterns in the azimuth angle are almost omni-directional with linear polarisation. The antenna geometry is uniplanar printed logspiral with striplines feeding network and biased components to improve the impedance bandwidth. The antenna provides the benefit of small size, and re-configurability and is very well suited for the asset tracking applications

Desenho de antenas para sensores passivos em materiais não convencionais

Doutoramento em Engenharia EletrotécnicaMotivado pela larga expansão dos sistemas RFID e com o desenvolvimento do conceito de Internet das Coisas, a evolução no desenho e métodos de produção de antenas em suportes de materiais alternativos tem tido uma exploração intensiva nos últimos anos. Isto permitiu, não só o desenvolvimento de produtos no campo da interação homem-máquina, mas também tornar estes produtos mais pequenos e leves. A procura de novas técnicas e métodos para produzir eletrónica impressa e antenas em materiais alternativos e, portanto, uma porta aberta para o aparecimento de novas tecnologias. Isto aplica-se especialmente no mercado dos sensores, onde o peso, o tamanho, o consumo energético, e a adaptabilidade a diversos ambientes, têm grande relevância. Esta tese foca-se no desenvolvimento de antenas com suporte em materiais não convenvionais, como os já testados papel e têxteis, mas também na exploração de outros, desconhecidos do ponto de vista eléctrico, como a cortiça e polímeros biodegradáveis usados em impressão 3D. Estes materiais são portanto usados como substrato, ou material de suporte, para diversas antenas e, como tal, as propriedades electromagnéticas destes materiais têm de ser determinadas. Assim, e apresentado neste documento uma revisão de métodos de caracterização de materiais, bem como a proposta de um método baseado em linhas de trasmissão impressas, e a respectiva caracterização electromagnética de diversos materiais. Além disso, são propostos desenhos de antenas para diversos cenários e aplicações utilizando os materiais anteriormente mencionados. Com esta tese concluiu-se que a utilização de materiais alternativos e hoje uma realidade e os resultados obtidos são muito encorajodares para o desenvolvimento de um conjunto de sensores para aplicações RFID com uma grande capacidade de integração.The advancement of the design and fabrication of antennas using textiles or paper as substrates has rapidly grown motivated by the boom of RFID systems and the developing concept of the Internet of Things. These advancements have allowed, not only the development of products for manmachine interaction, but also to make these products smaller and lighter. The search for new techniques and methods to produce printed electronics and antennas in alternative materials is therefore an open door for new technologies to emerge. Especially in the sensors market, where weight, size, power consumption and the adaptability to the target application, are of great importance. This thesis focuses on the development of antenna design approaches with alternative materials, such as the already tested paper and textiles, but also others relatively unknown, such as cork and biodegradable polymers used in 3D printing. These materials are applied to act as substrates, or support structures for the antennas. Therefore, their electromagnetic properties need to be determined. Due to that, a review of electromagnetic characterization methods, as well as the proposal of a custom method based on printed transmission lines, is presented in this document. Besides, several antenna designs, for di erent application scenarios, using the previously mentioned materials, are proposed. With this thesis it was proved that it is possible to develop passive sensors in di erent alternative materials for RFID applications and others, which shows great promise in the use of these materials to achieve higher integration in sensing and identi cation applications

Experimental Fabrication and Characterisation of Textile Metamaterial Structures for Microwave Applications

PhDThis thesis presents an investigation of fabrication technologies and electromagnetic characterisation of textile metamaterials in the microwave frequency range. Interdisciplinary in nature, the work bridges textile design practice and electromagnetic engineering. The particular ambition was to explore a number of surface techniques prevalent in the textile design field, and map their suitability for the construction of metatextiles for microwave operation. Two different classes of metatextiles, all-dielectric and dielectric with electrically conductive patterns, were examined. First, five structures of all-dielectric textiles and papers are reported; three textiles with graded embroidered and screen printed patterns, and two papers embellished with regular and irregular laser cut patterns. Permittivities for these materials were measured in a purpose-built test chamber and shown to be similar to permittivity ranges exhibited by solid discrete metamaterial cells previously reported in the scientific literature. Importantly these metatextiles were realised within one textile surface and one fabrication process, bypassing the need to assemble large numbers of isotropic material cells. This reveals the potential for rapid and low-cost manufacture of graded textile materials to produce anisotropic ground plane cloaks. Secondly, three studies are presented that examine the use of electrically conductive patterned textile materials in the design of metatextiles which exhibit negative refractive index over a narrow frequency band. A range of e-textile (electronic textile) fabrication technologies were explored to assess their suitability for prototyping splitring and wire arrays, resonating in a narrow region between 3 - 10 GHz. Designs utilised a repeated unit cell pattern on a two-dimensional textile surface and were subsequently pleated into the required three-dimensional structure. A small negative refractive index was achieved for an embroidered prototype at 4.9 GHz, and two ‘printed and plated’ prototypes at, 7.5 GHz and 9.5 GHz respectively. In summary the thesis demonstrates a set of guidelines for the fabrication of textile metamaterials for microwave frequencies, derived through a practice-led and interdisciplinary method based on material experimentation.Media and Arts Technology programme, EPSRC Doctoral Training Centre EP/G03723X/1