Multi-Sensor Context-Awareness in Mobile Devices and Smart Artefacts

The use of context in mobile devices is receiving increasing attention in mobile and ubiquitous computing research. In this article we consider how to augment mobile devices with awareness of their environment and situation as context. Most work to date has been based on integration of generic context sensors, in particular for location and visual context. We propose a different approach based on integration of multiple diverse sensors for awareness of situational context that can not be inferred from location, and targeted at mobile device platforms that typically do not permit processing of visual context. We have investigated multi-sensor context-awareness in a series of projects, and report experience from development of a number of device prototypes. These include development of an awareness module for augmentation of a mobile phone, of the Mediacup exemplifying context-enabled everyday artifacts, and of the Smart-Its platform for aware mobile devices. The prototypes have been explored in various applications to validate the multi-sensor approach to awareness, and to develop new perspectives of how embedded context-awareness can be applied in mobile and ubiquitous computing

Methods for monitoring the human circadian rhythm in free-living

Our internal clock, the circadian clock, determines at which time we have our best cognitive abilities, are physically strongest, and when we are tired. Circadian clock phase is influenced primarily through exposure to light. A direct pathway from the eyes to the suprachiasmatic nucleus, where the circadian clock resides, is used to synchronise the circadian clock to external light-dark cycles. In modern society, with the ability to work anywhere at anytime and a full social agenda, many struggle to keep internal and external clocks synchronised. Living against our circadian clock makes us less efficient and poses serious health impact, especially when exercised over a long period of time, e.g. in shift workers. Assessing circadian clock phase is a cumbersome and uncomfortable task. A common method, dim light melatonin onset testing, requires a series of eight saliva samples taken in hourly intervals while the subject stays in dim light condition from 5 hours before until 2 hours past their habitual bedtime. At the same time, sensor-rich smartphones have become widely available and wearable computing is on the rise. The hypothesis of this thesis is that smartphones and wearables can be used to record sensor data to monitor human circadian rhythms in free-living. To test this hypothesis, we conducted research on specialised wearable hardware and smartphones to record relevant data, and developed algorithms to monitor circadian clock phase in free-living. We first introduce our smart eyeglasses concept, which can be personalised to the wearers head and 3D-printed. Furthermore, hardware was integrated into the eyewear to recognise typical activities of daily living (ADLs). A light sensor integrated into the eyeglasses bridge was used to detect screen use. In addition to wearables, we also investigate if sleep-wake patterns can be revealed from smartphone context information. We introduce novel methods to detect sleep opportunity, which incorporate expert knowledge to filter and fuse classifier outputs. Furthermore, we estimate light exposure from smartphone sensor and weather in- formation. We applied the Kronauer model to compare the phase shift resulting from head light measurements, wrist measurements, and smartphone estimations. We found it was possible to monitor circadian phase shift from light estimation based on smartphone sensor and weather information with a weekly error of 32±17min, which outperformed wrist measurements in 11 out of 12 participants. Sleep could be detected from smartphone use with an onset error of 40±48 min and wake error of 42±57 min. Screen use could be detected smart eyeglasses with 0.9 ROC AUC for ambient light intensities below 200lux. Nine clusters of ADLs were distinguished using Gaussian mixture models with an average accuracy of 77%. In conclusion, a combination of the proposed smartphones and smart eyeglasses applications could support users in synchronising their circadian clock to the external clocks, thus living a healthier lifestyle

A high speed Tri-Vision system for automotive applications

Purpose: Cameras are excellent ways of non-invasively monitoring the interior and exterior of vehicles. In particular, high speed stereovision and multivision systems are important for transport applications such as driver eye tracking or collision avoidance. This paper addresses the synchronisation problem which arises when multivision camera systems are used to capture the high speed motion common in such applications. Methods: An experimental, high-speed tri-vision camera system intended for real-time driver eye-blink and saccade measurement was designed, developed, implemented and tested using prototype, ultra-high dynamic range, automotive-grade image sensors specifically developed by E2V (formerly Atmel) Grenoble SA as part of the European FP6 project – sensation (advanced sensor development for attention stress, vigilance and sleep/wakefulness monitoring). Results : The developed system can sustain frame rates of 59.8 Hz at the full stereovision resolution of 1280 × 480 but this can reach 750 Hz when a 10 k pixel Region of Interest (ROI) is used, with a maximum global shutter speed of 1/48000 s and a shutter efficiency of 99.7%. The data can be reliably transmitted uncompressed over standard copper Camera-Link® cables over 5 metres. The synchronisation error between the left and right stereo images is less than 100 ps and this has been verified both electrically and optically. Synchronisation is automatically established at boot-up and maintained during resolution changes. A third camera in the set can be configured independently. The dynamic range of the 10bit sensors exceeds 123 dB with a spectral sensitivity extending well into the infra-red range. Conclusion: The system was subjected to a comprehensive testing protocol, which confirms that the salient requirements for the driver monitoring application are adequately met and in some respects, exceeded. The synchronisation technique presented may also benefit several other automotive stereovision applications including near and far-field obstacle detection and collision avoidance, road condition monitoring and others.Partially funded by the EU FP6 through the IST-507231 SENSATION project.peer-reviewe

Next Generation M2M Cellular Networks: Challenges and Practical Considerations

In this article, we present the major challenges of future machine-to-machine (M2M) cellular networks such as spectrum scarcity problem, support for low-power, low-cost, and numerous number of devices. As being an integral part of the future Internet-of-Things (IoT), the true vision of M2M communications cannot be reached with conventional solutions that are typically cost inefficient. Cognitive radio concept has emerged to significantly tackle the spectrum under-utilization or scarcity problem. Heterogeneous network model is another alternative to relax the number of covered users. To this extent, we present a complete fundamental understanding and engineering knowledge of cognitive radios, heterogeneous network model, and power and cost challenges in the context of future M2M cellular networks

Human motion analysis and simulation tools: a survey

Computational systems to identify objects represented in image sequences and tracking their motion in a fully automatic manner, enabling a detailed analysis of the involved motion and its simulation are extremely relevant in several fields of our society. In particular, the analysis and simulation of the human motion has a wide spectrum of relevant applications with a manifest social and economic impact. In fact, usage of human motion data is fundamental in a broad number of domains (e.g.: sports, rehabilitation, robotics, surveillance, gesture-based user interfaces, etc.). Consequently, many relevant engineering software applications have been developed with the purpose of analyzing and/or simulating the human motion. This chapter presents a detailed, broad and up to date survey on motion simulation and/or analysis software packages that have been developed either by the scientific community or commercial entities. Moreover, a main contribution of this chapter is an effective framework to classify and compare motion simulation and analysis tools

Agricultural Production System Based On IOT

Internet of things (IoT) is not a single word, but it has gathered billions of devices in the same lane. The Internet of things has given the lives of things. Machines have a sense now like a human. It works remotely as the program has been settled inside the chip. The system has become so smart and reliable. The Internet of things has brought out changes in most of the sectors of humankind. Meanwhile, agriculture is the main strength of a country. The more the production of agricultural products increased, the world will be more completeness from food shortage. The production of agriculture can be increased when the IoT system can be entirely implemented in the agricultural sector. Most of the approaches for IoT based agriculture have been reviewed in this paper. Related to IoT based agriculture, most of the architecture and methodology have been interpreted and have been critically analyzed based on previous related work of the researchers. This paper will be able to provide a complete idea with the architecture and methodology in the field of IoT based agriculture. Moreover, the challenges for agricultural IoT are discussed with the methods provided by the researche