A Multi-Gigabit/sec Integrated Multiple Input Multiple Output VLC Demonstrator

In this paper, we report the performance of an imaging multiple input multiple output (MIMO) visible light communication (VLC) system. The VLC transmitter consists of a two-dimensional, individually addressable Gallium Nitride micro light emitting diode (µLED) array. The receiver uses a two-dimensional avalanche photodiode (APD) array fabricated using complementary metal oxide semiconductor (CMOS). Using integrated CMOS-based LED drivers, a data rate greater than 1 Gbps was obtained at a link distance of 1 m with the system field of view (FOV) of 3.45 degree using four channels. At a reduced link distance of 0.5 m, a data rate of 7.48 Gbps was obtained using a nine channel MIMO system. This demonstrates the feasibility of compact MIMO systems which offer substantial data rates

A review of gallium nitride LEDs for multi-gigabit-per-second visible light data communications

The field of visible light communications (VLC) has gained significant interest over the last decade, in both fibre and free-space embodiments. In fibre systems, the availability of low cost plastic optical fibre (POF) that is compatible with visible data communications has been a key enabler. In free-space applications, the availability of hundreds of THz of the unregulated spectrum makes VLC attractive for wireless communications. This paper provides an overview of the recent developments in VLC systems based on gallium nitride (GaN) light-emitting diodes (LEDs), covering aspects from sources to systems. The state-of-the-art technology enabling bandwidth of GaN LEDs in the range of >400 MHz is explored. Furthermore, advances in key technologies, including advanced modulation, equalisation, and multiplexing that have enabled free-space VLC data rates beyond 10 Gb/s are also outlined

SPAD-Array Contention Signal and Noise Model Suitable for Multilevel Modulation Schemes with Signal Processing

The first signal model for a single photon avalanche diode (SPAD)-array communication receiver for multilevel modulation schemes is reported. This paper proposes a novel, generalised SPAD array signal and noise model for both digital and analogue, synchronous and asynchronous SPAD readout arrays, which includes the competition between the input photons, dark counts and after-pulsing counts. With this contention signal and noise model, multilevel signals including the signal variation after distortion or equalisation can be evaluated. Also, we report the first numerical investigation for SPAD-based, high data rate, free space, visible light communication using higher order pulse amplitude modulation (PAM) with matched filter, linear and non-linear Volterra post-equalization. Simulations have been carried out to analyze and compare the bit error rate (BER) performances under a variety of conditions. The model is verified by comparison with published experimental results.UK EPSRC via the TOWS project (EP/S016570/1

Modelization and characterization of a CMOS camera as an optical real-time oscilloscope

Complementary Metal-Oxide Semiconductor (CMOS) camera sensors are embedded in many consumer electronics products: Thanks to the Rolling Shutter (RS) readout mode, they can detect a time-varying light intensity, which is the key to realize Optical Camera Communication (OCC). To this aim, we introduce here a model describing the camera as a Real-Time Oscilloscope (RTO) detecting optical signals; by means of this approach, we can now characterize the Complementary Metal-Oxide Semiconductor (CMOS) camera by means of parameters that correspond to common oscilloscope specifications, such as the frequency response, the noise, the Signal to Noise Ratio (SNR), the total harmonic distortion (THD), etc.; all of these are introduced and measured in terms of the camera parameters. This approach provides for the first time a set of quantitative tools that should be used to maximize the OCC transmission performance by allowing the optimal selection of the camera settings

Evaluation of spectrally efficient indoor optical wireless transmission techniques

Optical wireless communications (OWC) has the potential to become a remedy for the shortage of the radio frequency (RF) spectrum. Especially in indoor environments, OWC could enable wireless home networking systems which offload data traffic from existing RF systems. In OWC, data is transmitted by modulating the intensity of light sources, typically incoherent light emitting diodes (LEDs). Thus, OWC systems employ intensity modulation (IM) and direct detection (DD) of the optical carrier. Since off-the-shelf LEDs have a limited modulation capability, the transmission bandwidth of practical OWC systems is restricted. Consequently, the available bandwidth has to be used efficiently. In this thesis, spectrally efficient optical wireless transmission techniques are evaluated. Firstly, multiple transmitter-receiver techniques are investigated. These multiple-input-multiple-output (MIMO) techniques provide high spectral efficiency, and therefore high data rates. Specifically, the MIMO techniques repetition coding (RC), spatial multiplexing (SMP) and spatial modulation (SM) are analysed for indoor OWC. The performance of these techniques is evaluated analytically and by means of computer simulations. It is shown that inducing power imbalance between the multiple optical transmitters can substantially improve the performance of optical MIMO techniques as the power imbalance improves the differentiability of the multiple channels. In addition, it is found that link blockage and the utilisation of transmitters having different optical wavelengths enhance channel differentiability as well. These methods enable the utilisation of optical MIMO techniques under conditions which typically disallow the application of MIMO schemes due to little differences between the multiple links. Secondly, a novel optical wireless transmitter concept is developed. This concept uses discrete power level stepping to generate intensity modulated optical signals, such as orthogonal frequency division multiplexing (OFDM) waveforms. The transmitter consists of several on-off-switchable LED groups which are individually controlled to emit scaled optical intensities. As a result, the digital-to-analogue conversion of the signals to be sent is done in the optical domain. This method enables the implementation of low-complex and power-efficient optical transmitter front-ends – the major shortcoming of conventional optical OFDM transmitters. Thirdly, a novel approach for wireless data transmission within an aircraft cabin is presented. The data is transferred by 2-dimensional visual code sequences. These sequences are displayed on the in-flight entertainment (IFE) screen and are captured by the built-in camera of a user device which acts as receiver. Transmission experiments within an aircraft cabin mock-up demonstrate the functionality of the implemented system under realistic conditions, such as ambient illumination and geometric configuration. Altogether, this thesis has analysed the potential of spectrally efficient optical wireless transmission techniques. It is shown that OWC systems can greatly benefit from these techniques