Interconnect Planning for Physical Design of 3D Integrated Circuits

Vertical stacking—based on modern manufacturing and integration technologies—of multiple 2D chips enables three-dimensional integrated circuits (3D ICs). This exploitation of the third dimension is generally accepted for aiming at higher packing densities, heterogeneous integration, shorter interconnects, reduced power consumption, increased data bandwidth, and realizing highly-parallel systems in one device. However, the commercial acceptance of 3D ICs is currently behind its expectations, mainly due to challenges regarding manufacturing and integration technologies as well as design automation. This work addresses three selected, practically relevant design challenges: (i) increasing the constrained reusability of proven, reliable 2D intellectual property blocks, (ii) planning different types of (comparatively large) through-silicon vias with focus on their impact on design quality, as well as (iii) structural planning of massively-parallel, 3D-IC-specific interconnect structures during 3D floorplanning. A key concept of this work is to account for interconnect structures and their properties during early design phases in order to support effective and high-quality 3D-IC-design flows. To tackle the above listed challenges, modular design-flow extensions and methodologies have been developed. Experimental investigations reveal the effectiveness and efficiency of the proposed techniques, and provide findings on 3D integration with particular focus on interconnect structures. We suggest consideration of these findings when formulating guidelines for successful 3D-IC design automation.:1 Introduction 1.1 The 3D Integration Approach for Electronic Circuits 1.2 Technologies for 3D Integrated Circuits 1.3 Design Approaches for 3D Integrated Circuits 2 State of the Art in Design Automation for 3D Integrated Circuits 2.1 Thermal Management 2.2 Partitioning and Floorplanning 2.3 Placement and Routing 2.4 Power and Clock Delivery 2.5 Design Challenges 3 Research Objectives 4 Planning Through-Silicon Via Islands for Block-Level Design Reuse 4.1 Problems for Design Reuse in 3D Integrated Circuits 4.2 Connecting Blocks Using Through-Silicon Via Islands 4.2.1 Problem Formulation and Methodology Overview 4.2.2 Net Clustering 4.2.3 Insertion of Through-Silicon Via Islands 4.2.4 Deadspace Insertion and Redistribution 4.3 Experimental Investigation 4.3.1 Wirelength Estimation 4.3.2 Configuration 4.3.3 Results and Discussion 4.4 Summary and Conclusions 5 Planning Through-Silicon Vias for Design Optimization 5.1 Deadspace Requirements for Optimized Planning of Through-Silicon Vias 5.2 Multiobjective Design Optimization of 3D Integrated Circuits 5.2.1 Methodology Overview and Configuration 5.2.2 Techniques for Deadspace Optimization 5.2.3 Design-Quality Analysis 5.2.4 Planning Different Types of Through-Silicon Vias 5.3 Experimental Investigation 5.3.1 Configuration 5.3.2 Results and Discussion 5.4 Summary and Conclusions 6 3D Floorplanning for Structural Planning of Massive Interconnects 6.1 Block Alignment for Interconnects Planning in 3D Integrated Circuits 6.2 Corner Block List Extended for Block Alignment 6.2.1 Alignment Encoding 6.2.2 Layout Generation: Block Placement and Alignment 6.3 3D Floorplanning Methodology 6.3.1 Optimization Criteria and Phases and Related Cost Models 6.3.2 Fast Thermal Analysis 6.3.3 Layout Operations 6.3.4 Adaptive Optimization Schedule 6.4 Experimental Investigation 6.4.1 Configuration 6.4.2 Results and Discussion 6.5 Summary and Conclusions 7 Research Summary, Conclusions, and Outlook Dissertation Theses Notation Glossary BibliographyDreidimensional integrierte Schaltkreise (3D-ICs) beruhen auf neuartigen Herstellungs- und Integrationstechnologien, wobei vor allem “klassische” 2D-ICs vertikal zu einem neuartigen 3D-System gestapelt werden. Dieser Ansatz zur Erschließung der dritten Dimension im Schaltkreisentwurf ist nach Expertenmeinung dazu geeignet, höhere Integrationsdichten zu erreichen, heterogene Integration zu realisieren, kürzere Verdrahtungswege zu ermöglichen, Leistungsaufnahmen zu reduzieren, Datenübertragungsraten zu erhöhen, sowie hoch-parallele Systeme in einer Baugruppe umzusetzen. Aufgrund von technologischen und entwurfsmethodischen Schwierigkeiten bleibt jedoch bisher die kommerzielle Anwendung von 3D-ICs deutlich hinter den Erwartungen zurück. In dieser Arbeit werden drei ausgewählte, praktisch relevante Problemstellungen der Entwurfsautomatisierung von 3D-ICs bearbeitet: (i) die Verbesserung der (eingeschränkten) Wiederverwendbarkeit von zuverlässigen 2D-Intellectual-Property-Blöcken, (ii) die komplexe Planung von verschiedenartigen, verhältnismäßig großen Through-Silicion Vias unter Beachtung ihres Einflusses auf die Entwurfsqualität, und (iii) die strukturelle Einbindung von massiv-parallelen, 3D-IC-spezifischen Verbindungsstrukturen während der Floorplanning-Phase. Das Ziel dieser Arbeit besteht darin, Verbindungsstrukturen mit deren wesentlichen Eigenschaften bereits in den frühen Phasen des Entwurfsprozesses zu berücksichtigen. Dies begünstigt einen qualitativ hochwertigen Entwurf von 3D-ICs. Die in dieser Arbeit vorgestellten modularen Entwurfsprozess-Erweiterungen bzw. -Methodiken dienen zur effizienten Lösung der oben genannten Problemstellungen. Experimentelle Untersuchungen bestätigen die Wirksamkeit sowie die Effektivität der erarbeiten Methoden. Darüber hinaus liefern sie praktische Erkenntnisse bezüglich der Anwendung von 3D-ICs und der Planung deren Verbindungsstrukturen. Diese Erkenntnisse sind zur Ableitung von Richtlinien für den erfolgreichen Entwurf von 3D-ICs dienlich.:1 Introduction 1.1 The 3D Integration Approach for Electronic Circuits 1.2 Technologies for 3D Integrated Circuits 1.3 Design Approaches for 3D Integrated Circuits 2 State of the Art in Design Automation for 3D Integrated Circuits 2.1 Thermal Management 2.2 Partitioning and Floorplanning 2.3 Placement and Routing 2.4 Power and Clock Delivery 2.5 Design Challenges 3 Research Objectives 4 Planning Through-Silicon Via Islands for Block-Level Design Reuse 4.1 Problems for Design Reuse in 3D Integrated Circuits 4.2 Connecting Blocks Using Through-Silicon Via Islands 4.2.1 Problem Formulation and Methodology Overview 4.2.2 Net Clustering 4.2.3 Insertion of Through-Silicon Via Islands 4.2.4 Deadspace Insertion and Redistribution 4.3 Experimental Investigation 4.3.1 Wirelength Estimation 4.3.2 Configuration 4.3.3 Results and Discussion 4.4 Summary and Conclusions 5 Planning Through-Silicon Vias for Design Optimization 5.1 Deadspace Requirements for Optimized Planning of Through-Silicon Vias 5.2 Multiobjective Design Optimization of 3D Integrated Circuits 5.2.1 Methodology Overview and Configuration 5.2.2 Techniques for Deadspace Optimization 5.2.3 Design-Quality Analysis 5.2.4 Planning Different Types of Through-Silicon Vias 5.3 Experimental Investigation 5.3.1 Configuration 5.3.2 Results and Discussion 5.4 Summary and Conclusions 6 3D Floorplanning for Structural Planning of Massive Interconnects 6.1 Block Alignment for Interconnects Planning in 3D Integrated Circuits 6.2 Corner Block List Extended for Block Alignment 6.2.1 Alignment Encoding 6.2.2 Layout Generation: Block Placement and Alignment 6.3 3D Floorplanning Methodology 6.3.1 Optimization Criteria and Phases and Related Cost Models 6.3.2 Fast Thermal Analysis 6.3.3 Layout Operations 6.3.4 Adaptive Optimization Schedule 6.4 Experimental Investigation 6.4.1 Configuration 6.4.2 Results and Discussion 6.5 Summary and Conclusions 7 Research Summary, Conclusions, and Outlook Dissertation Theses Notation Glossary Bibliograph

Heurísticas bioinspiradas para el problema de Floorplanning 3D térmico de dispositivos MPSoCs

Tesis inédita de la Universidad Complutense de Madrid, Facultad de Informática, Departamento de Arquitectura de Computadores y Automática, leída el 20-06-2013Depto. de Arquitectura de Computadores y AutomáticaFac. de InformáticaTRUEunpu

Doctor of Philosophy in Computing

dissertatio

Doctor of Philosophy

dissertationThe computing landscape is undergoing a major change, primarily enabled by ubiquitous wireless networks and the rapid increase in the use of mobile devices which access a web-based information infrastructure. It is expected that most intensive computing may either happen in servers housed in large datacenters (warehouse- scale computers), e.g., cloud computing and other web services, or in many-core high-performance computing (HPC) platforms in scientific labs. It is clear that the primary challenge to scaling such computing systems into the exascale realm is the efficient supply of large amounts of data to hundreds or thousands of compute cores, i.e., building an efficient memory system. Main memory systems are at an inflection point, due to the convergence of several major application and technology trends. Examples include the increasing importance of energy consumption, reduced access stream locality, increasing failure rates, limited pin counts, increasing heterogeneity and complexity, and the diminished importance of cost-per-bit. In light of these trends, the memory system requires a major overhaul. The key to architecting the next generation of memory systems is a combination of the prudent incorporation of novel technologies, and a fundamental rethinking of certain conventional design decisions. In this dissertation, we study every major element of the memory system - the memory chip, the processor-memory channel, the memory access mechanism, and memory reliability, and identify the key bottlenecks to efficiency. Based on this, we propose a novel main memory system with the following innovative features: (i) overfetch-aware re-organized chips, (ii) low-cost silicon photonic memory channels, (iii) largely autonomous memory modules with a packet-based interface to the proces- sor, and (iv) a RAID-based reliability mechanism. Such a system is energy-efficient, high-performance, low-complexity, reliable, and cost-effective, making it ideally suited to meet the requirements of future large-scale computing systems

Architecture and Advanced Electronics Pathways Toward Highly Adaptive Energy- Efficient Computing

With the explosion of the number of compute nodes, the bottleneck of future computing systems lies in the network architecture connecting the nodes. Addressing the bottleneck requires replacing current backplane-based network topologies. We propose to revolutionize computing electronics by realizing embedded optical waveguides for onboard networking and wireless chip-to-chip links at 200-GHz carrier frequency connecting neighboring boards in a rack. The control of novel rate-adaptive optical and mm-wave transceivers needs tight interlinking with the system software for runtime resource management

Energy Efficient Servers

Computer scienc

Energy Efficient Servers

Computer scienc

Protecting Systems From Exploits Using Language-Theoretic Security

Any computer program processing input from the user or network must validate the input. Input-handling vulnerabilities occur in programs when the software component responsible for filtering malicious input---the parser---does not perform validation adequately. Consequently, parsers are among the most targeted components since they defend the rest of the program from malicious input. This thesis adopts the Language-Theoretic Security (LangSec) principle to understand what tools and research are needed to prevent exploits that target parsers. LangSec proposes specifying the syntactic structure of the input format as a formal grammar. We then build a recognizer for this formal grammar to validate any input before the rest of the program acts on it. To ensure that these recognizers represent the data format, programmers often rely on parser generators or parser combinators tools to build the parsers. This thesis propels several sub-fields in LangSec by proposing new techniques to find bugs in implementations, novel categorizations of vulnerabilities, and new parsing algorithms and tools to handle practical data formats. To this end, this thesis comprises five parts that tackle various tenets of LangSec. First, I categorize various input-handling vulnerabilities and exploits using two frameworks. First, I use the mismorphisms framework to reason about vulnerabilities. This framework helps us reason about the root causes leading to various vulnerabilities. Next, we built a categorization framework using various LangSec anti-patterns, such as parser differentials and insufficient input validation. Finally, we built a catalog of more than 30 popular vulnerabilities to demonstrate the categorization frameworks. Second, I built parsers for various Internet of Things and power grid network protocols and the iccMAX file format using parser combinator libraries. The parsers I built for power grid protocols were deployed and tested on power grid substation networks as an intrusion detection tool. The parser I built for the iccMAX file format led to several corrections and modifications to the iccMAX specifications and reference implementations. Third, I present SPARTA, a novel tool I built that generates Rust code that type checks Portable Data Format (PDF) files. The type checker I helped build strictly enforces the constraints in the PDF specification to find deviations. Our checker has contributed to at least four significant clarifications and corrections to the PDF 2.0 specification and various open-source PDF tools. In addition to our checker, we also built a practical tool, PDFFixer, to dynamically patch type errors in PDF files. Fourth, I present ParseSmith, a tool to build verified parsers for real-world data formats. Most parsing tools available for data formats are insufficient to handle practical formats or have not been verified for their correctness. I built a verified parsing tool in Dafny that builds on ideas from attribute grammars, data-dependent grammars, and parsing expression grammars to tackle various constructs commonly seen in network formats. I prove that our parsers run in linear time and always terminate for well-formed grammars. Finally, I provide the earliest systematic comparison of various data description languages (DDLs) and their parser generation tools. DDLs are used to describe and parse commonly used data formats, such as image formats. Next, I conducted an expert elicitation qualitative study to derive various metrics that I use to compare the DDLs. I also systematically compare these DDLs based on sample data descriptions available with the DDLs---checking for correctness and resilience