3,418 research outputs found

    Safety implications of a pedestrian protection system - the driver's point of view

    Get PDF
    Pedestrians can sustain fatal injuries, even in low-speed collisions. Active pedestrian protection systems, such as an Active Bonnet, have been shown to mitigate the outcome of a collision. The study reported here aimed to discover whether such a system could have any negative impacts on the driver. One of the characteristics of the Active Bonnet is that, when deployed, it partially occludes the driver’s visual field. This driving simulator study quantified the amount of disruption to normal driving when the system is deployed, for drivers of three different heights. Curved and straight sections of road were simulated and occlusion time varied between 0.5 seconds and 4 seconds. In general, drivers’ reaction to the deployment of the bonnet was to decrease their speed; this was most noticeable for drivers at the lowest eye-height both in the straight and curved sections of road. On straight sections of road, drivers were able to maintain vehicle speed and lateral control for up to three seconds of partial occlusion of the visual field. For curved sections, this upper threshold was found to be only two seconds, reflecting the higher workload in the curved sections. When occlusion was lifted, drivers tended to then deviate in lane – a possible “panic” effect. As drivers became more familiar with the system, they applied the brakes less. In conclusion, according to the scenarios tested in this study, drivers appear to be able to cope with partial occlusions of two seconds or less and there is some evidence that a panic reaction can be lessened by familiarisation

    A Programmable Display-Layer Architecture for Virtual-Reality Applications

    Get PDF
    Two important technical objectives of virtual-reality systems are to provide compelling visuals and effective 3D user interaction. In this respect, modern virtual reality system architectures suffer from a number of short-comings. The reduction of end-to-end latency, crosstalk and judder are especially difficult challenges, each of which negatively affects visual quality or user interaction. In order to provide higher quality visuals, complex scenes consisting of large models are often used. Rendering such a complex scene is a time-consuming process resulting in high end-to-end latency, thereby hampering user interaction. Classic virtual-reality architectures can not adequately address these challenges due to their inherent design principles. In particular, the tight coupling between input devices, the rendering loop and the display system inhibits these systems from addressing all the aforementioned challenges simultaneously. In this thesis, a virtual-reality architecture design is introduced that is based on the addition of a new logical layer: the Programmable Display Layer (PDL). The governing idea is that an extra layer is inserted between the rendering system and the display. In this way, the display can be updated at a fast rate and in a custom manner independent of the other components in the architecture, including the rendering system. To generate intermediate display updates at a fast rate, the PDL performs per-pixel depth-image warping by utilizing the application data. Image warping is the process of computing a new image by transforming individual depth-pixels from a closely matching previous image to their updated locations. The PDL architecture can be used for a range of algorithms and to solve problems that are not easily solved using classic architectures. In particular, techniques to reduce crosstalk, judder and latency are examined using algorithms implemented on top of the PDL. Concerning user interaction techniques, several six-degrees-of-freedom input methods exists, of which optical tracking is a popular option. However, optical tracking methods also introduce several constraints that depend on the camera setup, such as line-of-sight requirements, the volume of the interaction space and the achieved tracking accuracy. These constraints generally cause a decline in the effectiveness of user interaction. To investigate the effectiveness of optical tracking methods, an optical tracker simulation framework has been developed, including a novel optical tracker to test this framework. In this way, different optical tracking algorithms can be simulated and quantitatively evaluated under a wide range of conditions. A common approach in virtual reality is to implement an algorithm and then to evaluate the efficacy of that algorithm by either subjective, qualitative metrics or quantitative user experiments, after which an updated version of the algorithm may be implemented and the cycle repeated. A different approach is followed here. Throughout this thesis, an attempt is made to automatically detect and quantify errors using completely objective and automated quantitative methods and to subsequently attempt to resolve these errors dynamically

    VIOLA - A multi-purpose and web-based visualization tool for neuronal-network simulation output

    Full text link
    Neuronal network models and corresponding computer simulations are invaluable tools to aid the interpretation of the relationship between neuron properties, connectivity and measured activity in cortical tissue. Spatiotemporal patterns of activity propagating across the cortical surface as observed experimentally can for example be described by neuronal network models with layered geometry and distance-dependent connectivity. The interpretation of the resulting stream of multi-modal and multi-dimensional simulation data calls for integrating interactive visualization steps into existing simulation-analysis workflows. Here, we present a set of interactive visualization concepts called views for the visual analysis of activity data in topological network models, and a corresponding reference implementation VIOLA (VIsualization Of Layer Activity). The software is a lightweight, open-source, web-based and platform-independent application combining and adapting modern interactive visualization paradigms, such as coordinated multiple views, for massively parallel neurophysiological data. For a use-case demonstration we consider spiking activity data of a two-population, layered point-neuron network model subject to a spatially confined excitation originating from an external population. With the multiple coordinated views, an explorative and qualitative assessment of the spatiotemporal features of neuronal activity can be performed upfront of a detailed quantitative data analysis of specific aspects of the data. Furthermore, ongoing efforts including the European Human Brain Project aim at providing online user portals for integrated model development, simulation, analysis and provenance tracking, wherein interactive visual analysis tools are one component. Browser-compatible, web-technology based solutions are therefore required. Within this scope, with VIOLA we provide a first prototype.Comment: 38 pages, 10 figures, 3 table

    Photorealistic retrieval of occluded facial information using a performance-driven face model

    Get PDF
    Facial occlusions can cause both human observers and computer algorithms to fail in a variety of important tasks such as facial action analysis and expression classification. This is because the missing information is not reconstructed accurately enough for the purpose of the task in hand. Most current computer methods that are used to tackle this problem implement complex three-dimensional polygonal face models that are generally timeconsuming to produce and unsuitable for photorealistic reconstruction of missing facial features and behaviour. In this thesis, an image-based approach is adopted to solve the occlusion problem. A dynamic computer model of the face is used to retrieve the occluded facial information from the driver faces. The model consists of a set of orthogonal basis actions obtained by application of principal component analysis (PCA) on image changes and motion fields extracted from a sequence of natural facial motion (Cowe 2003). Examples of occlusion affected facial behaviour can then be projected onto the model to compute coefficients of the basis actions and thus produce photorealistic performance-driven animations. Visual inspection shows that the PCA face model recovers aspects of expressions in those areas occluded in the driver sequence, but the expression is generally muted. To further investigate this finding, a database of test sequences affected by a considerable set of artificial and natural occlusions is created. A number of suitable metrics is developed to measure the accuracy of the reconstructions. Regions of the face that are most important for performance-driven mimicry and that seem to carry the best information about global facial configurations are revealed using Bubbles, thus in effect identifying facial areas that are most sensitive to occlusions. Recovery of occluded facial information is enhanced by applying an appropriate scaling factor to the respective coefficients of the basis actions obtained by PCA. This method improves the reconstruction of the facial actions emanating from the occluded areas of the face. However, due to the fact that PCA produces bases that encode composite, correlated actions, such an enhancement also tends to affect actions in non-occluded areas of the face. To avoid this, more localised controls for facial actions are produced using independent component analysis (ICA). Simple projection of the data onto an ICA model is not viable due to the non-orthogonality of the extracted bases. Thus occlusion-affected mimicry is first generated using the PCA model and then enhanced by accordingly manipulating the independent components that are subsequently extracted from the mimicry. This combination of methods yields significant improvements and results in photorealistic reconstructions of occluded facial actions

    Applications of CSP solving in computer games (camera control)

    Get PDF
    While camera control systems of commercial 3D games have improved greatly in recent years, they are not as fully developed as are other game components such as graphics and physics engines. Bourne and Sattar (2006) have proposed a reactive constraint based third person perspective camera control system. We have extended the capability of their system to handle occlusion while following the main character, and have used camera cuts to find appropriate camera positions for a few difficult situations. We have developed a reactive constraint based third person perspective chase camera control system to follow a character in a 3D environment. The camera follows the character from (near) optimal positions defined by a camera profile. The desired values of the height and distance constraints of the camera profile are changed appropriately whenever the character enters a semi-enclosed or an enclosed area, and the desired value of the orientation constraint of the camera profile is changed incrementally whenever theoptimal camera view is obstructed. Camera cuts are used whenever the main character backs up to a wall or any other obstructions, or comes out of a semi-enclosed or an enclosed area. Two auxiliary cameras to observe the main camera positions from top and side views have been added. The chase camera control system achieved real-time performance while following the main character in a typical 3D environment, and maintained an optimal view based on a user specified/selected camera profile

    Realistic Visualization of Animated Virtual Cloth

    Get PDF
    Photo-realistic rendering of real-world objects is a broad research area with applications in various different areas, such as computer generated films, entertainment, e-commerce and so on. Within photo-realistic rendering, the rendering of cloth is a subarea which involves many important aspects, ranging from material surface reflection properties and macroscopic self-shadowing to animation sequence generation and compression. In this thesis, besides an introduction to the topic plus a broad overview of related work, different methods to handle major aspects of cloth rendering are described. Material surface reflection properties play an important part to reproduce the look & feel of materials, that is, to identify a material only by looking at it. The BTF (bidirectional texture function), as a function of viewing and illumination direction, is an appropriate representation of reflection properties. It captures effects caused by the mesostructure of a surface, like roughness, self-shadowing, occlusion, inter-reflections, subsurface scattering and color bleeding. Unfortunately a BTF data set of a material consists of hundreds to thousands of images, which exceeds current memory size of personal computers by far. This work describes the first usable method to efficiently compress and decompress a BTF data for rendering at interactive to real-time frame rates. It is based on PCA (principal component analysis) of the BTF data set. While preserving the important visual aspects of the BTF, the achieved compression rates allow the storage of several different data sets in main memory of consumer hardware, while maintaining a high rendering quality. Correct handling of complex illumination conditions plays another key role for the realistic appearance of cloth. Therefore, an upgrade of the BTF compression and rendering algorithm is described, which allows the support of distant direct HDR (high-dynamic-range) illumination stored in environment maps. To further enhance the appearance, macroscopic self-shadowing has to be taken into account. For the visualization of folds and the life-like 3D impression, these kind of shadows are absolutely necessary. This work describes two methods to compute these shadows. The first is seamlessly integrated into the illumination part of the rendering algorithm and optimized for static meshes. Furthermore, another method is proposed, which allows the handling of dynamic objects. It uses hardware-accelerated occlusion queries for the visibility determination. In contrast to other algorithms, the presented algorithm, despite its simplicity, is fast and produces less artifacts than other methods. As a plus, it incorporates changeable distant direct high-dynamic-range illumination. The human perception system is the main target of any computer graphics application and can also be treated as part of the rendering pipeline. Therefore, optimization of the rendering itself can be achieved by analyzing human perception of certain visual aspects in the image. As a part of this thesis, an experiment is introduced that evaluates human shadow perception to speedup shadow rendering and provides optimization approaches. Another subarea of cloth visualization in computer graphics is the animation of the cloth and avatars for presentations. This work also describes two new methods for automatic generation and compression of animation sequences. The first method to generate completely new, customizable animation sequences, is based on the concept of finding similarities in animation frames of a given basis sequence. Identifying these similarities allows jumps within the basis sequence to generate endless new sequences. Transmission of any animated 3D data over bandwidth-limited channels, like extended networks or to less powerful clients requires efficient compression schemes. The second method included in this thesis in the animation field is a geometry data compression scheme. Similar to the BTF compression, it uses PCA in combination with clustering algorithms to segment similar moving parts of the animated objects to achieve high compression rates in combination with a very exact reconstruction quality.Realistische Visualisierung von animierter virtueller Kleidung Das photorealistisches Rendering realer Gegenstände ist ein weites Forschungsfeld und hat Anwendungen in vielen Bereichen. Dazu zählen Computer generierte Filme (CGI), die Unterhaltungsindustrie und E-Commerce. Innerhalb dieses Forschungsbereiches ist das Rendern von photorealistischer Kleidung ein wichtiger Bestandteil. Hier reichen die wichtigen Aspekte, die es zu berücksichtigen gilt, von optischen Materialeigenschaften über makroskopische Selbstabschattung bis zur Animationsgenerierung und -kompression. In dieser Arbeit wird, neben der Einführung in das Thema, ein weiter Überblick über ähnlich gelagerte Arbeiten gegeben. Der Schwerpunkt der Arbeit liegt auf den wichtigen Aspekten der virtuellen Kleidungsvisualisierung, die oben beschrieben wurden. Die optischen Reflektionseigenschaften von Materialoberflächen spielen eine wichtige Rolle, um das so genannte look & feel von Materialien zu charakterisieren. Hierbei kann ein Material vom Nutzer identifiziert werden, ohne dass er es direkt anfassen muss. Die BTF (bidirektionale Texturfunktion)ist eine Funktion die abhängig von der Blick- und Beleuchtungsrichtung ist. Daher ist sie eine angemessene Repräsentation von Reflektionseigenschaften. Sie enthält Effekte wie Rauheit, Selbstabschattungen, Verdeckungen, Interreflektionen, Streuung und Farbbluten, die durch die Mesostruktur der Oberfläche hervorgerufen werden. Leider besteht ein BTF Datensatz eines Materials aus hunderten oder tausenden von Bildern und sprengt damit herkömmliche Hauptspeicher in Computern bei weitem. Diese Arbeit beschreibt die erste praktikable Methode, um BTF Daten effizient zu komprimieren, zu speichern und für Echtzeitanwendungen zum Visualisieren wieder zu dekomprimieren. Die Methode basiert auf der Principal Component Analysis (PCA), die Daten nach Signifikanz ordnet. Während die PCA die entscheidenen visuellen Aspekte der BTF erhält, können mit ihrer Hilfe Kompressionsraten erzielt werden, die es erlauben mehrere BTF Materialien im Hauptspeicher eines Consumer PC zu verwalten. Dies erlaubt ein High-Quality Rendering. Korrektes Verwenden von komplexen Beleuchtungssituationen spielt eine weitere, wichtige Rolle, um Kleidung realistisch erscheinen zu lassen. Daher wird zudem eine Erweiterung des BTF Kompressions- und Renderingalgorithmuses erläutert, die den Einsatz von High-Dynamic Range (HDR) Beleuchtung erlaubt, die in environment maps gespeichert wird. Um die realistische Erscheinung der Kleidung weiter zu unterstützen, muss die makroskopische Selbstabschattung integriert werden. Für die Visualisierung von Falten und den lebensechten 3D Eindruck ist diese Art von Schatten absolut notwendig. Diese Arbeit beschreibt daher auch zwei Methoden, diese Schatten schnell und effizient zu berechnen. Die erste ist nahtlos in den Beleuchtungspart des obigen BTF Renderingalgorithmuses integriert und für statische Geometrien optimiert. Die zweite Methode behandelt dynamische Objekte. Dazu werden hardwarebeschleunigte Occlusion Queries verwendet, um die Sichtbarkeitsberechnung durchzuführen. Diese Methode ist einerseits simpel und leicht zu implementieren, anderseits ist sie schnell und produziert weniger Artefakte, als vergleichbare Methoden. Zusätzlich ist die Verwendung von veränderbarer, entfernter HDR Beleuchtung integriert. Das menschliche Wahrnehmungssystem ist das eigentliche Ziel jeglicher Anwendung in der Computergrafik und kann daher selbst als Teil einer erweiterten Rendering Pipeline gesehen werden. Daher kann das Rendering selbst optimiert werden, wenn man die menschliche Wahrnehmung verschiedener visueller Aspekte der berechneten Bilder analysiert. Teil der vorliegenden Arbeit ist die Beschreibung eines Experimentes, das menschliche Schattenwahrnehmung untersucht, um das Rendern der Schatten zu beschleunigen. Ein weiteres Teilgebiet der Kleidungsvisualisierung in der Computergrafik ist die Animation der Kleidung und von Avataren für Präsentationen. Diese Arbeit beschreibt zwei neue Methoden auf diesem Teilgebiet. Einmal ein Algorithmus, der für die automatische Generierung neuer Animationssequenzen verwendet werden kann und zum anderen einen Kompressionsalgorithmus für eben diese Sequenzen. Die automatische Generierung von völlig neuen, anpassbaren Animationen basiert auf dem Konzept der Ähnlichkeitssuche. Hierbei werden die einzelnen Schritte von gegebenen Basisanimationen auf Ähnlichkeiten hin untersucht, die zum Beispiel die Geschwindigkeiten einzelner Objektteile sein können. Die Identifizierung dieser Ähnlichkeiten erlaubt dann Sprünge innerhalb der Basissequenz, die dazu benutzt werden können, endlose, neue Sequenzen zu erzeugen. Die Übertragung von animierten 3D Daten über bandbreitenlimitierte Kanäle wie ausgedehnte Netzwerke, Mobilfunk oder zu sogenannten thin clients erfordert eine effiziente Komprimierung. Die zweite, in dieser Arbeit vorgestellte Methode, ist ein Kompressionsschema für Geometriedaten. Ähnlich wie bei der Kompression von BTF Daten wird die PCA in Verbindung mit Clustering benutzt, um die animierte Geometrie zu analysieren und in sich ähnlich bewegende Teile zu segmentieren. Diese erkannten Segmente lassen sich dann hoch komprimieren. Der Algorithmus arbeitet automatisch und erlaubt zudem eine sehr exakte Rekonstruktionsqualität nach der Dekomprimierung
    • …
    corecore