Evaluation of cross-layer reliability mechanisms for satellite digital multimedia broadcast

This paper presents a study of some reliability mechanisms which may be put at work in the context of Satellite Digital Multimedia Broadcasting (SDMB) to mobile devices such as handheld phones. These mechanisms include error correcting codes, interleaving at the physical layer, erasure codes at intermediate layers and error concealment on the video decoder. The evaluation is made on a realistic satellite channel and takes into account practical constraints such as the maximum zapping time and the user mobility at several speeds. The evaluation is done by simulating different scenarii with complete protocol stacks. The simulations indicate that, under the assumptions taken here, the scenario using highly compressed video protected by erasure codes at intermediate layers seems to be the best solution on this kind of channel

3D video coding and transmission

The capture, transmission, and display of 3D content has gained a lot of attention in the last few years. 3D multimedia content is no longer con fined to cinema theatres but is being transmitted using stereoscopic video over satellite, shared on Blu-RayTMdisks, or sent over Internet technologies. Stereoscopic displays are needed at the receiving end and the viewer needs to wear special glasses to present the two versions of the video to the human vision system that then generates the 3D illusion. To be more e ffective and improve the immersive experience, more views are acquired from a larger number of cameras and presented on di fferent displays, such as autostereoscopic and light field displays. These multiple views, combined with depth data, also allow enhanced user experiences and new forms of interaction with the 3D content from virtual viewpoints. This type of audiovisual information is represented by a huge amount of data that needs to be compressed and transmitted over bandwidth-limited channels. Part of the COST Action IC1105 \3D Content Creation, Coding and Transmission over Future Media Networks" (3DConTourNet) focuses on this research challenge.peer-reviewe

Analysis and Simulation of the Signals Transmission in the DVB-H/SH Standards

Tato disertační práce se zabývá analýzou, simulací a měřením zpracování a přenosu signálů digitální televize pro příjem mobilního TV vysílání ve standardech DVB-H a DVB-SH. Tyto standardy vycházejí z předpokladu, že příjem signálu je charakterizován modely přenosových kanálů s vícecestným šířením. Tyto, tzv. únikové kanály, jsou charakterizovány hlavně zpožděním a ziskem jednotlivých cest. V závislosti na dalších parametrech (rychlost přijímače, Dopplerovské spektrum), je možné rozdělit únikové kanály do třech hlavních skupin: mobilní, přenosné a fixní. Dá se předpokládat, že v různých modelech kanálů bude přenášený signál různě ovlivněn. Proto je potřebné najít optimální parametry systémů (DVB-H/SH) pro kvalitní příjem vysílaných služeb mobilní televize, což je hlavním cílem této disertační práci. Pro tento účel byly vytvořeny dvě vhodné aplikace (jedna pro DVB-H a jedna pro DVB-SH) s GUI v prostředí MATLAB, které umožňují simulovat a analyzovat míru zkreslení signálu v případě mobilních, přenosných a fixních scénářů přenosu. Navíc, tyto aplikace obsahují i druhý samostatný simulátor pro nastavení a modifikaci parametrů jednotlivých přenosových cest. Díky tomu je možné zhodnotit vliv parametrů celého systému a kanálových modelů na dosaženou chybovost (BER a MER) a kvalitu přenosu. Ve všech přenosových scénářích (v závislosti na poměru C/N) byly získané, vyhodnocené a diskutované zkreslení signálů. Navíc, u standardu DVB-H, všechny získané výsledky ze simulací byly ověřeny měřením. Rozdíly mezi dosaženými výsledky (simulace a měření) byly rovněž podrobeny diskuzi. Tuto disertační práci je možné rozdělit do čtyř hlavních částí. První část disertační práce se zabývá rešerší současného vývoje v oblasti digitálního televizního vysílání na mobilní terminály ve standardech DVB-H/SH. Na konci této části jsou jasně popsány cíle této disertační práce. Druhá část práce je zaměřená na stručný popis blokového diagramu vysílačů v obou standardech DVB-H/SH. Dále jsou stručně popsány modely přenosových kanálů, které se používají pro modelování přenosu signálu. Stručný popis vytvořených aplikací, i s vývojovým diagramem, které jsou vhodné pro simulaci a analýzu přenosu v DVB-H/SH, jsou popsány v třetí části práce. Čtvrtá a nejdelší část této disertační práce se zabývá vyhodnocením získaných výsledků ze simulací a měření.This dissertation thesis deals with the analysis, simulation and measurement of the signal processing and transmission in DVB-H and DVB-SH standards. These standards are based on the assumption that signal reception is characterized by the transmission channels with echoes. These, so called fading channels, are mainly characterized by the path delays and path losses. Depending on the other, additional features (speed of the receiver, Doppler spectrum, etc.), it can be possible divided these channels onto three main groups: mobile, portable and fixed. Of course, signal transmission in different transmission channel models are affected differently. Therefore, it is needed found the optimal system parameters in both, DVB-H and DVB-SH standards, for the quality reception of the broadcasted mobile TV services, which is the main goal of this thesis. For this purpose, two appropriate applications (one for DVB-H and one for DVB-SH) with GUI were created in MATLAB, which enable simulated and analyzed the signal distortions in mobile, portable and fixed transmission scenarios. Moreover, these applications also contain a second application with GUI for the easy set and modification of the parameters of the used channel models. Therefore, it is possible to evaluate the effect of parameters of whole system and channel models on the achieved error rate (BER and MER) and quality of the transmission. In all mentioned transmission scenarios, the signal distortions (depending on the Carrier-to-Noise ratio) were obtained, evaluated and discussed in this dissertation thesis. Furthermore, in case of DVB-H, all obtained results from the simulations, were verified by the measuring. Differences between the obtained results (simulation and measuring) are also discussed. This dissertation thesis can be divided into four main parts. The first part of this dissertation thesis, after the short introduction, deals with present state-of-the-art and literature survey in mobile broadcast DVB-H/SH standards. At the end of this part are clearly outlined the main aims of this dissertation thesis. Second part is focused on the brief description of the functional block diagram of transmitters in both, DVB-H/SH standards. Furthermore, there are briefly described the transmission fading channel models, which are commonly used for the modeling of the signal transmission. The brief description of program applications with flowcharts, appropriate for the simulation of the transmission in the DVB-H/SH standards, are presented and described in the third part of this thesis. Finally, the fourth and longest part of this thesis is focused on the evaluation and comparison of obtained results from the simulations and measurements.

A survey of digital television broadcast transmission techniques

This paper is a survey of the transmission techniques used in digital television (TV) standards worldwide. With the increase in the demand for High-Definition (HD) TV, video-on-demand and mobile TV services, there was a real need for more bandwidth-efficient, flawless and crisp video quality, which motivated the migration from analogue to digital broadcasting. In this paper we present a brief history of the development of TV and then we survey the transmission technology used in different digital terrestrial, satellite, cable and mobile TV standards in different parts of the world. First, we present the Digital Video Broadcasting standards developed in Europe for terrestrial (DVB-T/T2), for satellite (DVB-S/S2), for cable (DVB-C) and for hand-held transmission (DVB-H). We then describe the Advanced Television System Committee standards developed in the USA both for terrestrial (ATSC) and for hand-held transmission (ATSC-M/H). We continue by describing the Integrated Services Digital Broadcasting standards developed in Japan for Terrestrial (ISDB-T) and Satellite (ISDB-S) transmission and then present the International System for Digital Television (ISDTV), which was developed in Brazil by adopteding the ISDB-T physical layer architecture. Following the ISDTV, we describe the Digital Terrestrial television Multimedia Broadcast (DTMB) standard developed in China. Finally, as a design example, we highlight the physical layer implementation of the DVB-T2 standar

On Low Complexity Detection for QAM Isomorphic Constellations

Despite of the known gap from the Shannon's capacity, several standards are still employing QAM or star shape constellations, mainly due to the existing low complexity detectors. In this paper, we investigate the low complexity detection for a family of QAM isomorphic constellations. These constellations are known to perform very close to the peak-power limited capacity, outperforming the DVB-S2X standard constellations. The proposed strategy is to first remap the received signals to the QAM constellation using the existing isomorphism and then break the log likelihood ratio computations to two one dimensional PAM constellations. Gains larger than 0.6 dB with respect to QAM can be obtained over the peak power limited channels without any increase in detection complexity. Our scheme also provides a systematic way to design constellations with low complexity one dimensional detectors. Several open problems are discussed at the end of the paper.Comment: Submitted to IEEE GLOBECOM 201