Evaluation of Haptic Patterns on a Steering Wheel

Infotainment Systems can increase mental workload and divert visual attention away from looking ahead on the roads. When these systems give information to the driver, provide it through the tactile channel on the steering, it wheel might improve driving behaviour and safety. This paper describes an investigation into the perceivability of haptic feedback patterns using an actuated surface on a steering wheel. Six solenoids were embedded along the rim of the steering wheel creating three bumps under each palm. Maximally, four of the six solenoids were actuated simultaneously, resulting in 56 patterns to test. Participants were asked to keep in the middle road of the driving simulator as good as possible. Overall recognition accuracy of the haptic patterns was 81.3%, where identification rate increased with decreasing number of active solenoids (up to 92.2% for a single solenoid). There was no significant increase in lane deviation or steering angle during haptic pattern presentation. These results suggest that drivers can reliably distinguish between cutaneous patterns presented on the steering wheel. Our findings can assist in delivering non-critical messages to the driver (e.g. driving performance, incoming text messages, etc.) without decreasing driving performance or increasing perceived mental workload

Eyes-Off Physically Grounded Mobile Interaction

This thesis explores the possibilities, challenges and future scope for eyes-off, physically grounded mobile interaction. We argue that for interactions with digital content in physical spaces, our focus should not be constantly and solely on the device we are using, but fused with an experience of the places themselves, and the people who inhabit them. Through the design, development and evaluation of a series ofnovel prototypes we show the benefits of a more eyes-off mobile interaction style.Consequently, we are able to outline several important design recommendations for future devices in this area.The four key contributing chapters of this thesis each investigate separate elements within this design space. We begin by evaluating the need for screen-primary feedback during content discovery, showing how a more exploratory experience can be supported via a less-visual interaction style. We then demonstrate how tactilefeedback can improve the experience and the accuracy of the approach. In our novel tactile hierarchy design we add a further layer of haptic interaction, and show how people can be supported in finding and filtering content types, eyes-off. We then turn to explore interactions that shape the ways people interact with aphysical space. Our novel group and solo navigation prototypes use haptic feedbackfor a new approach to pedestrian navigation. We demonstrate how variations inthis feedback can support exploration, giving users autonomy in their navigationbehaviour, but with an underlying reassurance that they will reach the goal.Our final contributing chapter turns to consider how these advanced interactionsmight be provided for people who do not have the expensive mobile devices that areusually required. We extend an existing telephone-based information service to support remote back-of-device inputs on low-end mobiles. We conclude by establishingthe current boundaries of these techniques, and suggesting where their usage couldlead in the future

Mechanical and psychophysical studies of surface wave propagation during vibrotactile stimulation

Thesis (S.M.)--Massachusetts Institute of Technology, Dept. of Mechanical Engineering, 2012.Cataloged from PDF version of thesis.Includes bibliographical references (p. 50-51).Vibrotactile displays are based on mechanical stimulation delivered using an array of motors to communicate with the user. The way in which the display's motors are spaced and positioned on the body can have a significant impact on the effectiveness of communication, especially for tactile displays used to convey spatial information. The objective of the present research was to determine how the surface waves induced by vibrotactile stimulation of the skin varied as a function of the site on the body where the motors were mounted, and how these waves influenced the ability to localize vibrotactile stimulation. Three locations on the body were selected for study: the palm, the forearm, and the thigh. A flexible printed circuit board containing 3-axis micro-accelerometers was fabricated to measure the amplitude and frequency of surface waves produced by a vibrating motor at each body site. Results of these experiments showed significant differences in the frequency and amplitude of vibration on the glabrous skin on the palm as compared to the hairy skin on the arm and thigh. The palm had the highest frequency and lowest amplitude surface waves, and the forearm and thigh were very similar with lower frequency higher amplitude surface waves. No anisotropies were found from surface wave measurements. Most wave attenuation occurred within the first 8 mm from the motor, but there were still detectable amplitudes at a distance of 24 mm from the motor, which suggests that motor spacing should be at least 24 mm for this type of motor when used for precise spatial localization. A series of psychophysical experiments was conducted using a three-by-three array of motors in which the ability of subjects to localize the point of stimulation in an array was determined at each of the three body locations. The results from these experiments indicated that the palm had the highest localization accuracy (81% correct) as compared to the forearm and thigh which had similar localization accuracies (49% correct on forearm, 45% correct on thigh). Accuracy on the palm and forearm improved when the motor spacing increased from 8 mm to 16 mm, but increased spacing did not improve accuracy on the thigh. The results also showed that subjects were more able to identify the column of activation as opposed to the row of activation, which suggests a higher spatial acuity along the mediallateral as opposed to proximal-distal axis. The localization experiments indicate that glabrous skin is better suited for precise spatial localization than hairy skin, and that precise spatial localization requires an inter-motor spacing of more than 16 mm at these sites.by Katherine O. Sofia.S.M

Augmenting the Spatial Perception Capabilities of Users Who Are Blind

People who are blind face a series of challenges and limitations resulting from their lack of being able to see, forcing them to either seek the assistance of a sighted individual or work around the challenge by way of a inefficient adaptation (e.g. following the walls in a room in order to reach a door rather than walking in a straight line to the door). These challenges are directly related to blind users' lack of the spatial perception capabilities normally provided by the human vision system. In order to overcome these spatial perception related challenges, modern technologies can be used to convey spatial perception data through sensory substitution interfaces. This work is the culmination of several projects which address varying spatial perception problems for blind users. First we consider the development of non-visual natural user interfaces for interacting with large displays. This work explores the haptic interaction space in order to find useful and efficient haptic encodings for the spatial layout of items on large displays. Multiple interaction techniques are presented which build on prior research (Folmer et al. 2012), and the efficiency and usability of the most efficient of these encodings is evaluated with blind children. Next we evaluate the use of wearable technology in aiding navigation of blind individuals through large open spaces lacking tactile landmarks used during traditional white cane navigation. We explore the design of a computer vision application with an unobtrusive aural interface to minimize veering of the user while crossing a large open space. Together, these projects represent an exploration into the use of modern technology in augmenting the spatial perception capabilities of blind users

Doctor of Philosophy

dissertationThe study of haptic interfaces focuses on the use of the sense of touch in human-machine interaction. This document presents a detailed investigation of lateral skin stretch at the fingertip as a means of direction communication. Such tactile communication has applications in a variety of situations where traditional audio and visual channels are inconvenient, unsafe, or already saturated. Examples include handheld consumer electronics, where tactile communication would allow a user to control a device without having to look at it, or in-car navigation systems, where the audio and visual directions provided by existing GPS devices can distract the driver's attention away from the road. Lateral skin stretch, the displacement of the skin of the fingerpad in a plane tangent to the fingerpad, is a highly effective means of communicating directional information. Users are able to correctly identify the direction of skin stretch stimuli with skin displacements as small as 0.1 mm at rates as slow as 2 mm/s. Such stimuli can be rendered by a small, portable device suitable for integration into handheld devices. The design of the device-finger interface affects the ability of the user to perceive the stimuli accurately. A properly designed conical aperture effectively constrains the motion of the finger and provides an interface that is practical for use in handheld devices. When a handheld device renders directional tactile cues on the fingerpad, the user must often mentally rotate those cues from the reference frame of the finger to the world-centered reference frame where those cues are to be applied. Such mental rotation incurs a cognitive cost, requiring additional time to mentally process the stimuli. The magnitude of these cognitive costs is a function of the angle of rotation, and of the specific orientations of the arm, wrist and finger. Even with the difficulties imposed by required mental rotations, lateral skin stretch is a promising means of communicating information using the sense of touch with potential to substantially improve certain types of human-machine interaction

MetaSpace II: Object and full-body tracking for interaction and navigation in social VR

MetaSpace II (MS2) is a social Virtual Reality (VR) system where multiple users can not only see and hear but also interact with each other, grasp and manipulate objects, walk around in space, and get tactile feedback. MS2 allows walking in physical space by tracking each user's skeleton in real-time and allows users to feel by employing passive haptics i.e., when users touch or manipulate an object in the virtual world, they simultaneously also touch or manipulate a corresponding object in the physical world. To enable these elements in VR, MS2 creates a correspondence in spatial layout and object placement by building the virtual world on top of a 3D scan of the real world. Through the association between the real and virtual world, users are able to walk freely while wearing a head-mounted device, avoid obstacles like walls and furniture, and interact with people and objects. Most current virtual reality (VR) environments are designed for a single user experience where interactions with virtual objects are mediated by hand-held input devices or hand gestures. Additionally, users are only shown a representation of their hands in VR floating in front of the camera as seen from a first person perspective. We believe, representing each user as a full-body avatar that is controlled by natural movements of the person in the real world (see Figure 1d), can greatly enhance believability and a user's sense immersion in VR.Comment: 10 pages, 9 figures. Video: http://living.media.mit.edu/projects/metaspace-ii

Haptics: Science, Technology, Applications

This open access book constitutes the proceedings of the 13th International Conference on Human Haptic Sensing and Touch Enabled Computer Applications, EuroHaptics 2022, held in Hamburg, Germany, in May 2022. The 36 regular papers included in this book were carefully reviewed and selected from 129 submissions. They were organized in topical sections as follows: haptic science; haptic technology; and haptic applications

HapticHead - Augmenting Reality via Tactile Cues

Information overload is increasingly becoming a challenge in today's world. Humans have only a limited amount of attention to allocate between sensory channels and tend to miss or misjudge critical sensory information when multiple activities are going on at the same time. For example, people may miss the sound of an approaching car when walking across the street while looking at their smartphones. Some sensory channels may also be impaired due to congenital or acquired conditions. Among sensory channels, touch is often experienced as obtrusive, especially when it occurs unexpectedly. Since tactile actuators can simulate touch, targeted tactile stimuli can provide users of virtual reality and augmented reality environments with important information for navigation, guidance, alerts, and notifications. In this dissertation, a tactile user interface around the head is presented to relieve or replace a potentially impaired visual channel, called \emph{HapticHead}. It is a high-resolution, omnidirectional, vibrotactile display that presents general, 3D directional, and distance information through dynamic tactile patterns. The head is well suited for tactile feedback because it is sensitive to mechanical stimuli and provides a large spherical surface area that enables the display of precise 3D information and allows the user to intuitively rotate the head in the direction of a stimulus based on natural mapping. Basic research on tactile perception on the head and studies on various use cases of head-based tactile feedback are presented in this thesis. Several investigations and user studies have been conducted on (a) the funneling illusion and localization accuracy of tactile stimuli around the head, (b) the ability of people to discriminate between different tactile patterns on the head, (c) approaches to designing tactile patterns for complex arrays of actuators, (d) increasing the immersion and presence level of virtual reality applications, and (e) assisting people with visual impairments in guidance and micro-navigation. In summary, tactile feedback around the head was found to be highly valuable as an additional information channel in various application scenarios. Most notable is the navigation of visually impaired individuals through a micro-navigation obstacle course, which is an order of magnitude more accurate than the previous state-of-the-art, which used a tactile belt as a feedback modality. The HapticHead tactile user interface's ability to safely navigate people with visual impairments around obstacles and on stairs with a mean deviation from the optimal path of less than 6~cm may ultimately improve the quality of life for many people with visual impairments.Die Informationsüberlastung wird in der heutigen Welt zunehmend zu einer Herausforderung. Der Mensch hat nur eine begrenzte Menge an Aufmerksamkeit, die er zwischen den Sinneskanälen aufteilen kann, und neigt dazu, kritische Sinnesinformationen zu verpassen oder falsch einzuschätzen, wenn mehrere Aktivitäten gleichzeitig ablaufen. Zum Beispiel können Menschen das Geräusch eines herannahenden Autos überhören, wenn sie über die Straße gehen und dabei auf ihr Smartphone schauen. Einige Sinneskanäle können auch aufgrund von angeborenen oder erworbenen Erkrankungen beeinträchtigt sein. Unter den Sinneskanälen wird Berührung oft als aufdringlich empfunden, besonders wenn sie unerwartet auftritt. Da taktile Aktoren Berührungen simulieren können, können gezielte taktile Reize den Benutzern von Virtual- und Augmented Reality Anwendungen wichtige Informationen für die Navigation, Führung, Warnungen und Benachrichtigungen liefern. In dieser Dissertation wird eine taktile Benutzeroberfläche um den Kopf herum präsentiert, um einen möglicherweise beeinträchtigten visuellen Kanal zu entlasten oder zu ersetzen, genannt \emph{HapticHead}. Es handelt sich um ein hochauflösendes, omnidirektionales, vibrotaktiles Display, das allgemeine, 3D-Richtungs- und Entfernungsinformationen durch dynamische taktile Muster darstellt. Der Kopf eignet sich gut für taktiles Feedback, da er empfindlich auf mechanische Reize reagiert und eine große sphärische Oberfläche bietet, die die Darstellung präziser 3D-Informationen ermöglicht und es dem Benutzer erlaubt, den Kopf aufgrund der natürlichen Zuordnung intuitiv in die Richtung eines Reizes zu drehen. Grundlagenforschung zur taktilen Wahrnehmung am Kopf und Studien zu verschiedenen Anwendungsfällen von kopfbasiertem taktilem Feedback werden in dieser Arbeit vorgestellt. Mehrere Untersuchungen und Nutzerstudien wurden durchgeführt zu (a) der Funneling Illusion und der Lokalisierungsgenauigkeit von taktilen Reizen am Kopf, (b) der Fähigkeit von Menschen, zwischen verschiedenen taktilen Mustern am Kopf zu unterscheiden, (c) Ansätzen zur Gestaltung taktiler Muster für komplexe Arrays von Aktoren, (d) der Erhöhung des Immersions- und Präsenzgrades von Virtual-Reality-Anwendungen und (e) der Unterstützung von Menschen mit Sehbehinderungen bei der Führung und Mikronavigation. Zusammenfassend wurde festgestellt, dass taktiles Feedback um den Kopf herum als zusätzlicher Informationskanal in verschiedenen Anwendungsszenarien sehr wertvoll ist. Am interessantesten ist die Navigation von sehbehinderten Personen durch einen Mikronavigations-Hindernisparcours, welche um eine Größenordnung präziser ist als der bisherige Stand der Technik, der einen taktilen Gürtel als Feedback-Modalität verwendete. Die Fähigkeit der taktilen Benutzerschnittstelle HapticHead, Menschen mit Sehbehinderungen mit einer mittleren Abweichung vom optimalen Pfad von weniger als 6~cm sicher um Hindernisse und auf Treppen zu navigieren, kann letztendlich die Lebensqualität vieler Menschen mit Sehbehinderungen verbessern