EAGLE 2006 – Multi-purpose, multi-angle and multi-sensor in-situ and airborne campaigns over grassland and forest

EAGLE2006 - an intensive field campaign - was carried out in the Netherlands from the 8th until the 18th of June 2006. Several airborne sensors - an optical imaging sensor, an imaging microwave radiometer, and a flux airplane – were used and extensive ground measurements were conducted over one grassland (Cabauw) site and two forest sites (Loobos & Speulderbos) in the central part of the Netherlands, in addition to the acquisition of multi-angle and multi-sensor satellite data. The data set is both unique and urgently needed for the development and validation of models and inversion algorithms for quantitative surface parameter estimation and process studies. EAGLE2006 was led by the Department of Water Resources of the International Institute for Geo-Information Science and Earth Observation and originated from the combination of a number of initiatives coming under different funding. The objectives of the EAGLE2006 campaign were closely related to the objectives of other ESA Campaigns (SPARC2004, Sen2Flex2005 and especially AGRISAR2006). However, one important objective of the campaign is to build up a data base for the investigation and validation of the retrieval of bio-geophysical parameters, obtained at different radar frequencies (X-, C- and L-Band) and at hyperspectral optical and thermal bands acquired over vegetated fields (forest and grassland). As such, all activities were related to algorithm development for future satellite missions such as Sentinels and for satellite validations for MERIS, MODIS as well as AATSR and ASTER thermal data validation, with activities also related to the ASAR sensor on board ESA’s Envisat platform and those on EPS/MetOp and SMOS. Most of the activities in the campaign are highly relevant for the EU GEMS EAGLE project, but also issues related to retrieval of biophysical parameters from MERIS and MODIS as well as AATSR and ASTER data were of particular relevance to the NWO-SRON EcoRTM project, while scaling issues and complementary between these (covering only local sites) and global sensors such as MERIS/SEVIRI, EPS/MetOP and SMOS were also key elements for the SMOS cal/val project and the ESA-MOST DRAGON programme. This contribution describes the mission objectives and provides an overview of the airborne and field campaigns

Guidelines for Best Practice and Quality Checking of Ortho Imagery

For almost 10 years JRC's ¿Guidelines for Best Practice and Quality Control of Ortho Imagery¿ has served as a reference document for the production of orthoimagery not only for the purposes of CAP but also for many medium-to-large scale photogrammetric applications. The aim is to provide the European Commission and the remote sensing user community with a general framework of the best approaches for quality checking of orthorectified remotely sensed imagery, and the expected best practice, required to achieve good results. Since the last major revision (2003) the document was regularly updated in order to include state-of-the-art technologies. The major revision of the document was initiated last year in order to consolidate the information that was introduced to the document in the last five years. Following the internal discussion and the outcomes of the meeting with an expert panel it was decided to adopt as possible a process-based structure instead of a more sensor-based used before and also to keep the document as much generic as possible by focusing on the core aspects of the photogrammetric process. Additionally to any structural changes in the document new information was introduced mainly concerned with image resolution and radiometry, digital airborne sensors, data fusion, mosaicking and data compression. The Guidelines of best practice is used as the base for our work on the definition of technical specifications for the orthoimagery. The scope is to establish a core set of measures to ensure sufficient image quality for the purposes of CAP and particularly for the Land Parcel Identification System (PLIS), and also to define the set of metadata necessary for data documentation and overall job tracking.JRC.G.3-Agricultur

Multiscale forest health mapping: the potential of air- and space-borne remote sensing sensors

Forest health decline triggered by extensive periods of drought and high temperatures is increasingly common across Australia. In this respect remote sensing technology may help with understanding and managing forest health decline by providing information on a scale that field-based studies cannot match. In this thesis I explore the potential of air- and space-borne remote sensing in characterizing and monitoring forest health expressed in terms of tree dieback at multiple scales. I conducted my experiments in the largest river red gum forest in the world, located in the south-east of Australia that has experienced episodes of severe dieback over the past six decades. First, I propose a new algorithm that utilizes high point density airborne laser scans (ALS) for delineating individual trees with complex shapes, such as eucalypts, in Chapter 2. My algorithm was able to accurately delineate up to 68% of trees depending on forest and ALS point density. Second, I investigate the utility of ALS and imaging spectroscopy in classifying forest health at the individual tree level and diagnosing potential causes of forest health decline, in Chapter 3. According to my results the health of individual trees can be classified with an overall accuracy of 81% and a kappa score of 0.66, while infrequently flooded areas were most susceptible to tree health decline. Finally, I assess how low point density ALS, Synthetic Aperture Radar and multispectral satellite imagery can estimate forest health at the plot level, in Chapter 4. My findings demonstrate that individual tree health could be scaled up to the plot level with substantial level of accuracy (R2 of up to 0.64). Overall, my results provide a robust and peer-reviewed methodology that utilizes air- and space-borne remote sensing to accurately classify forest health at multiple scales. Moreover, the forest health map produced as a result of my research will potentially enable forest managers to perform demographic reporting on forest dynamics, diagnose ecological processes linked to forest health, and prioritize areas for forest health promotion and conservation of biodiversity

Interferometric synthetic aperture sonar system supported by satellite

Tese de doutoramento. Engenharia Electrotécnica e de Computadores. Faculdade de Engenharia. Universidade do Porto. 200

Small unmanned airborne systems to support oil and gas pipeline monitoring and mapping

Acknowledgments We thank Johan Havelaar, Aeryon Labs Inc., AeronVironment Inc. and Aeronautics Inc. for kindly permitting the use of materials in Fig. 1.Peer reviewedPublisher PD

Mitigation of atmospheric perturbations and solid Earth movements in a TerraSAR-X time-series

The TerraSAR-X (TSX) synthetic aperture radar (SAR) marks the recent emergence of a new generation of spaceborne radar sensors that can for the first time lay claim to localization accuracies in the sub-meter range. The TSX platform’s extremely high orbital stability and the sensor’s hardware timing accuracy combine to enable direct measurements of atmospheric refraction and solid Earth movements. By modeling these effects for individual TSX acquisitions, absolute pixel geolocation accuracy on the order of several centimeters can be achieved without need for even a single tiepoint. A 16-month time series of images was obtained over a fixed test site, making it possible to validate both an atmospheric refraction and a solid Earth tide model, while at the same time establishing the instrument’s long-term stability. These related goals were achieved by placing trihedral corner reflectors (CRs) at the test site and estimating their phase centers with centimeter-level accuracy using differential GPS (DGPS). Oriented in pairs toward a given satellite track, the CRs could be seen as bright “points” in the images, providing a geometric reference set. SAR images from the high-resolution spotlight (HS) mode were obtained in alternating ascending and descending orbit configurations. The highest-resolution products were selected for their small sample dimensions, as positions can be more precisely determined. Based on the delivered product annotations, the CR image positions were predicted, and these predictions were compared with their measured image positions both before and after compensation for atmospheric refraction and systematic solid Earth deviations. It was possible to show that when the atmospheric distortion and Earth tides are taken into account, the TSX HS products have geolocation accuracies far exceeding the specified requirements. Furthermore, this accuracy was maintained for the duration of the 16-month test period. It could be demonstrated that with a correctly calibrated sensor, and after accounting for atmospheric and tidal effects, tiepoint-free geolocation is possible with TSX with an absolute product accuracy of about 5 cm