938 research outputs found
Agile Calibration Process of Full-Stack Simulation Frameworks for V2X Communications
Computer simulations and real-world car trials are essential to investigate
the performance of Vehicle-to-Everything (V2X) networks. However, simulations
are imperfect models of the physical reality and can be trusted only when they
indicate agreement with the real-world. On the other hand, trials lack
reproducibility and are subject to uncertainties and errors. In this paper, we
will illustrate a case study where the interrelationship between trials,
simulation, and the reality-of-interest is presented. Results are then compared
in a holistic fashion. Our study will describe the procedure followed to
macroscopically calibrate a full-stack network simulator to conduct
high-fidelity full-stack computer simulations.Comment: To appear in IEEE VNC 2017, Torino, I
Ethernet Over Plastic Optical Fiber for Use in the Control System Network for Automotive Applications
Plastic optical fiber (POF) for use in automotive applications is not a new concept and has been used in some vehicles for infotainment media distribution within the Media Oriented Systems Transport protocol. However, the use of POF for the control networkâs physical layer is a concept that has not been implemented in automotive applications. Many aspects of a vehicle can be improved by implementing POF as the physical backbone for the control network. Currently, the Controller Area Network (CAN) is used as the primary backbone control network protocol for most automobiles as it is inexpensive and reliable. However, CAN is limited to 500 kbps in most vehicles and is easily accessible. Ethernet may provide the improvements of speed and security needed in todayâs feature rich and connected vehicles. The feasibility of implementing Ethernet over POF as the control network for automotive applications is the topic of this research investigation
SatCat5: A Low-Power, Mixed-Media Ethernet Network for Smallsats
In any satellite, internal bus and payload systems must exchange a variety of command, control, telemetry, and mission-data. In too many cases, the resulting network is an ad-hoc proliferation of complex, dissimilar protocols with incomplete system-to-system connectivity. While standards like CAN, MIL-STD-1553, and SpaceWire mitigate this problem, none can simultaneously solve the need for high throughput and low power consumption.
We present a new solution that uses Ethernet framing and addressing to unify a mixed-media network. Low-speed nodes (0.1-10 Mbps) use simple interfaces such as SPI and UART to communicate with extremely low power and minimal complexity. High-speed nodes use so-called âmedia-independentâ interfaces such as RMII, RGMII, and SGMII to communicate at rates up to 1000 Mbps and enable connection to traditional COTS network equipment. All are interconnected into a single smallsat-area-network using a Layer-2 network switch, with mixed-media support for all these interfaces on a single network. The result is fast, easy, and flexible communication between any two subsystems.
SatCat5 is presented as a free and open-source reference implementation of this mixed-media network switch, with power consumption of 0.2-0.7W depending on network activity. Further discussion includes example protocols that can be used on such networks, leveraging IPv4 when suitable but also enabling full-featured communication without the need for a complex protocol stack
2016 Formula SAE Vehicle Electrical Systems Design
The 2016 Formula SAE vehicle electrical systems design project provided enhanced electrical systems for the 2016 FSAE vehicle that competed in the Michigan 2016 FSAE competition. This report details the design of the electrical systems implemented on the vehicle including wireless telemetry, steering wheel, wheel sensors, and vehicle dynamics control systems. This report also outlines the design approach and methodology for the systems on the vehicle. Finally, the processes of how the systems were constructed and tested are documented along with recommendations for future work and design
Zips Racing Electric Battery Management System
Zips Racing Electric currently uses a bulky, off-the-shelf battery management system to monitor and manage the voltage, temperature, and state-of-charge of an electric formula-style racecar battery pack (accumulator). The objective of this project is to research current battery management methodologies and apply said research to design and create a lightweight, compact, custom battery management system that is integrated with existing vehicle systems. This will allow for cleaner accumulator packaging and improved communication between the battery management system and the rest of the vehicle
CUSTARD (Cranfield University Space Technology Advanced Research Demonstrator) - A Micro-System Technology Demonstrator Nanosatellite. Summary of the Group Design Project MSc in Astronautics and Space Engineering. 1999-2000, Cranfield University
CUSTARD (Cranfield University Space Technology And Research Demonstrator) was
the group design project for students of the MSc in Astronautics and Space
Engineering for the Academic Year 1999/2000 at Cranfield University. The project
involved the initial design of a nanosatellite to be used as a technology
demonstrator for microsystem technology (MST) in space. The students worked
together as one group (organised into several subgroups, e.g. system,
mechanical), with each student responsible for a set of work packages. The
nanosatellite designed had a mass of 4 kg, lifetime of 3 months in low Earth
orbit, coarse 3-axis attitude control (no orbit control), and was capable of
carrying up to 1 kg of payload. The electrical power available was 18 W (peak).
Assuming a single X-band ground station at RAL (UK), a data rate of up to 1 M
bit s-1 for about 3000 s per day is possible. The payloads proposed are a
microgravity laboratory and a formation flying experiment.
The report summarises the results of the project and includes executive
summaries from all team members. Further information and summaries of the full
reports are available from the College of Aeronautics, Cranfield University
Monitoring of electric buses within an urban smart city environment
A practical experience on monitoring the data generated by electric buses is presented, focusing on energy consumption, charge and state of the batteries. The work is carried out in the framework of a global smart city strategy developed by the H2020 Smart City Lighthouse STARDUST project. The crucial role of the data collection and transmission from electric buses has become evident in this work, so the adopted solutions are covered in detail. A practical electric bus charging station configuration is considered, operating within the city of Pamplona, Spain, with an urban route setting in which electric charging is performed. Various key factors for the practical implementation of the necessary communication infrastructure, including wireless Low Power Wide Area connectivity challenges within the urban scenario settings, based in LoRa/LoRaWAN communication system nodes. The monitoring system architecture is also presented, in which specific machine learning modules in order to collect patterns and visualization of data to enhance planning, operation and maintenance procedures.This work was supported in part by the Ministerio de Ciencia, InnovaciĂłn y Universidades, Gobierno de EspaĂąa (MCIU/AEI/FEDER, UE) under Project Project RTI2018-095499-B-C31, and in part by the European Unionâs Horizon 2020 Research and Innovation Programme (StardustHolistic and Integrated Urban Model for Smart Cities) under Grant NÂş774094
Advanced automotive radar front-end based on gapwaveguide technology
The pursuit of higher levels of autonomous driving necessitates the utilization of advanced radar sensors that possess improved environmental perception capabilities. Consequently, next-generation automotive radars require sophisticated antenna systems with high efficiency, thereby making waveguide antennas a more viable choice. In this context, it has been observed that gapwaveguides exhibit superior performance in comparison to traditional waveguides, particularly in terms of assembly reliability, when employed in the development of multi-layer waveguide antennas. Within the scope of this thesis, the primary objective is to comprehensively explore the design of front-ends for cutting-edge automotive radar sensors by leveraging the potential of gapwaveguide technology. The initial aspect of this thesis involves an exploration of integration techniques capable of achieving high performance in waveguide-based RF front-ends. In particular, the thesis introduces novel vertical gapwaveguide-to-microstrip transitions that facilitate the integration of RF front-ends featuring multi-layer configurations. Furthermore, this thesis introduces radar transceivers equipped with built-in waveguide-to-microstrip transitions, known as launcher-in-package, along with an imaging radar antenna featuring customized interconnections explicitly designed utilizing gapwaveguide technology to interface with the transceivers.Secondly, in light of the utilization of radar sensors incorporating orthogonal dual polarizations on the transmitting and/or receiving ends, an opportunity arises to acquire polarimetric information from the surrounding environment, thereby representing a promising advancement in the realm of autonomous driving. This thesis presents novel antenna designs based on gapwaveguide technology for polarimetric radar sensors. An 88 planar array utilizing double grooved circular waveguide polarizers is introduced, specifically designed for fixed beam, high gain polarimetric sensing applications. In addition, this thesis presents a polarimetric radar sensor that utilizes a MIMO configuration featuring single-CP transmitting antennas and dual-CP receiving antennas. The antenna design incorporates series-fed septum polarizers, which offer low-profile characteristics.In summary, this thesis undertakes a comprehensive investigation into the designs of advanced automotive radar front-ends utilizing gapwaveguide technology. The study explores the advancements in terms of integration techniques and polarimetric capability, demonstrating the potential of gapwaveguide technology for the practical implementation of waveguide-based RF front-ends. The utilization of such front-ends can significantly enhance the capabilities of autonomous driving systems
- âŚ