Intelligent Transportation Related Complex Systems and Sensors

Building around innovative services related to different modes of transport and traffic management, intelligent transport systems (ITS) are being widely adopted worldwide to improve the efficiency and safety of the transportation system. They enable users to be better informed and make safer, more coordinated, and smarter decisions on the use of transport networks. Current ITSs are complex systems, made up of several components/sub-systems characterized by time-dependent interactions among themselves. Some examples of these transportation-related complex systems include: road traffic sensors, autonomous/automated cars, smart cities, smart sensors, virtual sensors, traffic control systems, smart roads, logistics systems, smart mobility systems, and many others that are emerging from niche areas. The efficient operation of these complex systems requires: i) efficient solutions to the issues of sensors/actuators used to capture and control the physical parameters of these systems, as well as the quality of data collected from these systems; ii) tackling complexities using simulations and analytical modelling techniques; and iii) applying optimization techniques to improve the performance of these systems. It includes twenty-four papers, which cover scientific concepts, frameworks, architectures and various other ideas on analytics, trends and applications of transportation-related data

Travel time estimation in congested urban networks using point detectors data

A model for estimating travel time on short arterial links of congested urban networks, using currently available technology, is introduced in this thesis. The objective is to estimate travel time, with an acceptable level of accuracy for real-life traffic problems, such as congestion management and emergency evacuation. To achieve this research objective, various travel time estimation methods, including highway trajectories, multiple linear regression (MLR), artificial neural networks (ANN) and K –nearest neighbor (K-NN) were applied and tested on the same dataset. The results demonstrate that ANN and K-NN methods outperform linear methods by a significant margin, also, show particularly good performance in detecting congested intervals. To ensure the quality of the analysis results, set of procedures and algorithms based on traffic flow theory and test field information, were introduced to validate and clean the data used to build, train and test the different models

Crowdsourcing traffic data for travel time estimation

Travel time estimation is a fundamental measure used in routing and navigation applications, in particular in emerging intelligent transportation systems (ITS). For example, many users may prefer the fastest route to their destination and would rely on real-time predicted travel times. It also helps real-time traffic management and traffic light control. Accurate estimation of travel time requires collecting a lot of real-time data from road networks. This data can be collected using a wide variety of sources like inductive loop detectors, video cameras, radio frequency identification (RFID) transponders etc. But these systems include deployment of infrastructure which has some limitations and drawbacks. The main drawbacks in these modes are the high cost and the high probability of error caused by prevalence of equipment malfunctions and in the case of sensor based methods, the problem of spatial coverage.;As an alternative to traditional way of collecting data using expensive equipment, development of cellular & mobile technology allows for leveraging embedded GPS sensors in smartphones carried by millions of road users. Crowd-sourcing GPS data will allow building traffic monitoring systems that utilize this opportunity for the purpose of accurate and real-time prediction of traffic measures. However, the effectiveness of these systems have not yet been proven or shown in real applications. In this thesis, we study some of the current available data sets and identify the requirements for accurate prediction. In our work, we propose the design for a crowd-sourcing traffic application, including an android-based mobile client and a server architecture. We also develop map-matching method. More importantly, we present prediction methods using machine learning techniques such as support vector regression.;Machine learning provides an alternative to traditional statistical method such as using averaged historic data for estimation of travel time. Machine Learning techniques played a key role in estimation in the last two decades. They are proved by providing better accuracy in estimation and in classification. However, employing a machine learning technique in any application requires creative modeling of the system and its sensory data. In this thesis, we model the road network as a graph and train different models for different links on the road. Modeling a road network as graph with nodes and links enables the learner to capture patterns occurring on each segment of road, thereby providing better accuracy. To evaluate the prediction models, we use three sets of data out of which two sets are collected using mobile probing and one set is generated using VISSIM traffic simulator. The results show that crowdsourcing is only more accurate than traditional statistical methods if the input values for input data are very close to the actual values. In particular, when speed of vehicles on a link are concerned, we need to provide the machine learning model with data that is only few minutes old; using average speed of vehicles, for example from the past half hour, as is usually seen in many web based traffic information sources may not allow for better performance

What Is an Effective Way to Measure Arterial Demand When It Exceeds Capacity?

This project focused on developing and evaluating methods for estimating demand volume for oversaturated corridors. Measuring demand directly with vehicle sensors is not possible when demand is larger than capacity for an extended period, as the queue grows beyond the sensor, and the flow measurements at a given point cannot exceed the capacity of the section. The main objective of the study was to identify and develop methods that could be implemented in practice based on readily available data. To this end, two methods were proposed: an innovative method based on shockwave theory; and the volume delay function adapted from the Highway Capacity Manual. Both methods primarily rely on probe vehicle speeds (e.g., from INRIX) as the input data and the capacity of the segment or bottleneck being analyzed. The proposed methods were tested with simulation data and validated based on volume data from the field. The results show both methods are effective for estimating the demand volume and produce less than 4% error when tested with field data

Intelligent transportation related complex systems and sensors

Building around innovative services related to different modes of transport and traffic management, intelligent transport systems (ITSs) are being widely adopted worldwide to improve the efficiency and safety of the transportation system. They enable users to be better informed and make safer, more coordinated, and smarter decisions on the use of transport networks. Current ITSs are complex systems, made up of several components/sub-systems characterized by time-dependent interactions among themselves. Some examples of these transportation-related complex systems include road traffic sensors, autonomous/automated cars, smart cities, smart sensors, virtual sensors, traffic control systems, smart roads, logistics systems, smart mobility systems, and many others that are emerging from niche areas

Computational intelligence approaches to robotics, automation, and control [Volume guest editors]

No abstract available

Detecting and Tracking Vulnerable Road Users\u27 Trajectories Using Different Types of Sensors Fusion

Vulnerable road user (VRU) detection and tracking has been a key challenge in transportation research. Different types of sensors such as the camera, LiDAR, and inertial measurement units (IMUs) have been used for this purpose. For detection and tracking with the camera, it is necessary to perform calibration to obtain correct GPS trajectories. This method is often tedious and necessitates accurate ground truth data. Moreover, if the camera performs any pan-tilt-zoom function, it is usually necessary to recalibrate the camera. In this thesis, we propose camera calibration using an auxiliary sensor: ultra-wideband (UWB). USBs are capable of tracking a road user with ten-centimeter-level accuracy. Once a VRU with a UWB traverses in the camera view, the UWB GPS data is fused with the camera to perform real-time calibration. As the experimental results in this thesis have shown, the camera is able to output better trajectories after calibration. It is expected that the use of UWB is needed only once to fuse the data and determine the correct trajectories at the same intersection and location of the camera. All other trajectories collected by the camera can be corrected using the same adjustment. In addition, data analysis was conducted to evaluate the performance of the UWB sensors. This study also predicted pedestrian trajectories using data fused by the UWB and smartphone sensors. UWB GPS coordinates are very accurate although it lacks other sensor parameters such as accelerometer, gyroscope, etc. The smartphone data have been used in this scenario to augment the UWB data. The two datasets were merged on the basis of the closest timestamp. The resulting dataset has precise latitude and longitude from UWB as well as the accelerometer, gyroscope, and speed data from smartphones making the fused dataset accurate and rich in terms of parameters. The fused dataset was then used to predict the GPS coordinates of pedestrians and scooters using LSTM