1,220 research outputs found
Encoderless Gimbal Calibration of Dynamic Multi-Camera Clusters
Dynamic Camera Clusters (DCCs) are multi-camera systems where one or more
cameras are mounted on actuated mechanisms such as a gimbal. Existing methods
for DCC calibration rely on joint angle measurements to resolve the
time-varying transformation between the dynamic and static camera. This
information is usually provided by motor encoders, however, joint angle
measurements are not always readily available on off-the-shelf mechanisms. In
this paper, we present an encoderless approach for DCC calibration which
simultaneously estimates the kinematic parameters of the transformation chain
as well as the unknown joint angles. We also demonstrate the integration of an
encoderless gimbal mechanism with a state-of-the art VIO algorithm, and show
the extensions required in order to perform simultaneous online estimation of
the joint angles and vehicle localization state. The proposed calibration
approach is validated both in simulation and on a physical DCC composed of a
2-DOF gimbal mounted on a UAV. Finally, we show the experimental results of the
calibrated mechanism integrated into the OKVIS VIO package, and demonstrate
successful online joint angle estimation while maintaining localization
accuracy that is comparable to a standard static multi-camera configuration.Comment: ICRA 201
Nonlinear adaptive control of an aerial manipulation system
This paper presents the nonlinear adaptive control of a quadrotor endowed with a 2 degrees of freedom (DOF) manipulator. By considering the quadrotor and the robot arm as a combined system, complete modeling of the aerial manipulation system (AMS) has been presented using the Euler-Lagrange method. A hierarchical nonlinear control scheme which consists of outer and inner control loops has been utilized. Model Reference Adaptive Controller (MRAC) is designed for the outer loop where the required command signals are generated to force the quadrotor to move on a reference trajectory in the presence of uncertainties and reaction forces coming from the manipulator. For the inner loop, the attitude dynamics of the quadrotor and the dynamics of the 2-DOF robotic arm are considered as a fully actuated 5-DOF unified part of the AMS. Nonlinear adaptive control has been utilized for the low-level controller where the changes in inertias and the masses have been tackled along with the reaction forces acting on the attitude part of the AMS. The proposed technique has been validated through simulations in two different scenarios
Design and control of next-generation uavs for effectively interacting with environments
In this dissertation, the design and control of a novel multirotor for aerial manipulation is studied, with the aim of endowing the aerial vehicle with more degrees of freedom of motion and stability when interacting with the environments. Firstly, it presents an energy-efficient adaptive robust tracking control method for a class of fully actuated, thrust vectoring unmanned aerial vehicles (UAVs) with parametric uncertainties including unknown moment of inertia, mass and center of mass, which would occur in aerial maneuvering and manipulation. The effectiveness of this method is demonstrated through simulation. Secondly, a humanoid robot arm is adopted to serve as a 6-degree-of-freedom (DOF) automated flight testing platform for emulating the free flight environment of UAVs while ensuring safety. Another novel multirotor in a tilt-rotor architecture is studied and tested for coping with parametric uncertainties in aerial maneuvering and manipulation. Two pairs of rotors are mounted on two independently-controlled tilting arms placed at two sides of the vehicle in a H configuration to enhance its maneuverability and stability through an adaptive robust control method. In addition, an impedance control algorithm is deployed in the out loop that modifies the trajectory to achieve a compliant behavior in the end-effector space for aerial drilling and screwing tasks
Modeling and nonlinear adaptive control of an aerial manipulation system
Autonomous aerial robots have become an essential part of many civilian and military applications. The workspace and agility of these vehicles motivated great research interest resulting in various studies addressing their control architectures and mechanical configurations. Increasing autonomy enabled them to perform tasks such as surveillance, inspection and remote sensing in hazardous and challenging environments. The ongoing research promises further contributions to the society, in both theory and practice. To furthermore extend their vast applications, aerial robots are equipped with the tools to enable physical interaction with the environment. These tasks represent a great challenge due to the technological limitations as well as the lack of sophisticated methods necessary for the control of the system to perform desired operations in an efficient and stable manner. Modeling and control problem of an aerial manipulation is still an open research topic with many studies addressing these issues from different perspectives. This thesis deals with the nonlinear adaptive control of an aerial manipulation system (AMS). The system consists of a quadrotor equipped with a 2 degrees of freedom (DOF) manipulator. The complete modeling of the system is done using the Euler-Lagrange method. A hierarchical nonlinear control structure which consists of outer and inner control loops has been utilized. Model Reference Adaptive Controller (MRAC) is designed for the outer loop where the required command signals are generated to force the quadrotor to move on a reference trajectory in the presence of mass uncertainties and reaction forces coming from the manipulator. For the inner loop, the attitude dynamics of the quadrotor and the joint dynamics of the 2-DOF robotic arm are considered as a fully actuated 5-DOF unified part of the AMS. Nonlinear adaptive control has been utilized for the low-level controller where the changes in inertias have been considered. The proposed controller is tested on a high fidelity AMS model in the presence of uncertainties, wind disturbances and measurement noise, and satisfactory trajectory tracking performance with improved robustness is achieved
Trajectory tracking control of an aerial manipulator in presence of disturbances and modeling uncertainties
Development and dynamic validation of control techniques for trajectory tracking of a robotic manipulator mounted on a UAV. Tracking performances are evaluated in a context of simulated dynamic disturbance on manipulator base
An adaptive hierarchical control for aerial manipulators
This paper addresses the trajectory tracking control problem for a quadrotor aerial vehicle, equipped with a robotic manipulator (aerial manipulator). The controller is organized in two layers: in the top layer, an inverse kinematics algorithm computes the motion references for the actuated variables; in the bottom layer, a motion control algorithm is in charge of tracking the motion references computed by the upper layer. To the purpose, a model-based control scheme is adopted, where modelling uncertainties are compensated through an adaptive term. The stability of the proposed scheme is proven by resorting to Lyapunov arguments. Finally, a simulation case study is proposed to prove the effectiveness of the approach
Pose consensus based on dual quaternion algebra with application to decentralized formation control of mobile manipulators
This paper presents a solution based on dual quaternion algebra to the
general problem of pose (i.e., position and orientation) consensus for systems
composed of multiple rigid-bodies. The dual quaternion algebra is used to model
the agents' poses and also in the distributed control laws, making the proposed
technique easily applicable to time-varying formation control of general
robotic systems. The proposed pose consensus protocol has guaranteed
convergence when the interaction among the agents is represented by directed
graphs with directed spanning trees, which is a more general result when
compared to the literature on formation control. In order to illustrate the
proposed pose consensus protocol and its extension to the problem of formation
control, we present a numerical simulation with a large number of free-flying
agents and also an application of cooperative manipulation by using real mobile
manipulators
- …