Runtime Scheduling, Allocation, and Execution of Real-Time Hardware Tasks onto Xilinx FPGAs Subject to Fault Occurrence

This paper describes a novel way to exploit the computation capabilities delivered by modern Field-Programmable Gate Arrays (FPGAs), not only towards a higher performance, but also towards an improved reliability. Computation-specific pieces of circuitry are dynamically scheduled and allocated to different resources on the chip based on a set of novel algorithms which are described in detail in this article. These algorithms consider most of the technological constraints existing in modern partially reconfigurable FPGAs as well as spontaneously occurring faults and emerging permanent damage in the silicon substrate of the chip. In addition, the algorithms target other important aspects such as communications and synchronization among the different computations that are carried out, either concurrently or at different times. The effectiveness of the proposed algorithms is tested by means of a wide range of synthetic simulations, and, notably, a proof-of-concept implementation of them using real FPGA hardware is outlined

Variation Aware Placement for Efficient Key Generation using Physically Unclonable Functions in Reconfigurable Systems

With the importance of data security at its peak today, many reconfigurable systems are used to provide security. This protection is often provided by FPGA-based encrypt/decrypt cores secured with secret keys. Physical unclonable functions (PUFs) use random manufacturing variations to generate outputs that can be used in keys. These outputs are specific to a chip and can be used to create device-tied secret keys. Due to reliability issues with PUFs, key generation with PUFs typically requires error correction techniques. This can result in substantial hardware costs. Thus, the total cost of a $n$-bit key far exceeds just the cost of producing $n$ bits of PUF output. To tackle this problem, we propose the use of variation aware intra-FPGA PUF placement to reduce the area cost of PUF-based keys on FPGAs. We show that placing PUF instances according to the random variations of each chip instance reduces the bit error rate of the PUFs and the overall resources required to generate the key. Our approach has been demonstrated on a Xilinx Zynq-7000 programmable SoC using FPGA specific PUFs with code-offset error correction based on BCH codes. The approach is applicable to any PUF-based system implemented in reconfigurable logic. To evaluate our approach, we first analyze the key metrics of a PUF - reliability and uniqueness. Reliability is related to bit error rate, an important parameter with respect to error correction. In order to generate reliable results from the PUFs, a total of four ZedBoards containing FPGAs are used in our approach. We quantify the effectiveness of our approach by implementing the same key generation scheme using variation-aware and default placement, and show the resources saved by our approach

Comprehensive Evaluation of Supply Voltage Underscaling in FPGA on-Chip Memories

In this work, we evaluate aggressive undervolting, i.e., voltage scaling below the nominal level to reduce the energy consumption of Field Programmable Gate Arrays (FPGAs). Usually, voltage guardbands are added by chip vendors to ensure the worst-case process and environmental scenarios. Through experimenting on several FPGA architectures, we measure this voltage guardband to be on average 39% of the nominal level, which in turn, delivers more than an order of magnitude power savings. However, further undervolting below the voltage guardband may cause reliability issues as the result of the circuit delay increase, i.e., start to appear faults. We extensively characterize the behavior of these faults in terms of the rate, location, type, as well as sensitivity to environmental temperature, with a concentration of on-chip memories, or Block RAMs (BRAMs). Finally, we evaluate a typical FPGA-based Neural Network (NN) accelerator under low-voltage BRAM operations. In consequence, the substantial NN energy savings come with the cost of NN accuracy loss. To attain power savings without NN accuracy loss, we propose a novel technique that relies on the deterministic behavior of undervolting faults and can limit the accuracy loss to 0.1% without any timing-slack overhead.Peer ReviewedPostprint (author's final draft

Degradation in FPGAs: Monitoring, Modeling and Mitigation

This dissertation targets the transistor aging degradation as well as the associated thermal challenges in FPGAs (since there is an exponential relation between aging and chip temperature). The main objectives are to perform experimentation, analysis and device-level model abstraction for modeling the degradation in FPGAs, then to monitor the FPGA to keep track of aging rates and ultimately to propose an aging-aware FPGA design flow to mitigate the aging

Power Efficient Data-Aware SRAM Cell for SRAM-Based FPGA Architecture

The design of low-power SRAM cell becomes a necessity in today\u27s FPGAs, because SRAM is a critical component in FPGA design and consumes a large fraction of the total power. The present chapter provides an overview of various factors responsible for power consumption in FPGA and discusses the design techniques of low-power SRAM-based FPGA at system level, device level, and architecture levels. Finally, the chapter proposes a data-aware dynamic SRAM cell to control the power consumption in the cell. Stack effect has been adopted in the design to reduce the leakage current. The various peripheral circuits like address decoder circuit, write/read enable circuits, and sense amplifier have been modified to implement a power-efficient SRAM-based FPGA

Variation-aware high-level DSP circuit design optimisation framework for FPGAs

The constant technology shrinking and the increasing demand for systems that operate under different power profiles with the maximum performance, have motivated the work in this thesis. Modern design tools that target FPGA devices take a conservative approach in the estimation of the maximum performance that can be achieved by a design when it is placed on a device, accounting for any variability in the fabrication process of the device. The work presented here takes a new view on the performance improvement of DSP designs by pushing them into the error-prone regime, as defined by the synthesis tools, and by investigating methodologies that reduce the impact of timing errors at the output of the system. In this work two novel error reduction techniques are proposed to address this problem. One is based on reduced-precision redundancy and the other on an error optimisation framework that uses information from a prior characterisation of the device. The first one is a generic architecture that is appended to existing arithmetic operators. The second defines the high-level parameters of the algorithm without using extra resources. Both of these methods allow to achieve graceful degradation whilst variation increases. A comparison of the new methods is laid against the existing methodologies, and conclusions drawn on the tradeoffs between their cost, in terms of resources and errors, and their benefits in terms of throughput. In some cases it is possible to double the performance of the design while still producing valid results.Open Acces