Unmanned Aerial Vehicle-Based Phenotyping Using Morphometric and Spectral Analysis Can Quantify Responses of Wild Tomato Plants to Salinity Stress

With salt stress presenting a major threat to global food production, attention has turned to the identification and breeding of crop cultivars with improved salt tolerance. For instance, some accessions of wild species with higher salt tolerance than commercial varieties are being investigated for their potential to expand food production into marginal areas or to use brackish waters for irrigation. However, assessment of individual plant responses to salt stress in field trials is time-consuming, limiting, for example, longitudinal assessment of large numbers of plants. Developments in Unmanned Aerial Vehicle (UAV) sensing technologies provide a means for extensive, repeated and consistent phenotyping and have significant advantages over standard approaches. In this study, 199 accessions of the wild tomato species, Solanum pimpinellifolium, were evaluated through a field assessment of 600 control and 600 salt-treated plants. UAV imagery was used to: (1) delineate tomato plants from a time-series of eight RGB and two multi-spectral datasets, using an automated object-based image analysis approach; (2) assess four traits, i.e., plant area, growth rates, condition and Plant Projective Cover (PPC) over the growing season; and (3) use the mapped traits to identify the best-performing accessions in terms of yield and salt tolerance. For the first five campaigns, >99% of all tomato plants were automatically detected. The omission rate increased to 2–5% for the last three campaigns because of the presence of dead and senescent plants. Salt-treated plants exhibited a significantly smaller plant area (average control and salt-treated plant areas of 0.55 and 0.29 m2, respectively), maximum growth rate (daily maximum growth rate of control and salt-treated plant of 0.034 and 0.013 m2, respectively) and PPC (5–16% difference) relative to control plants. Using mapped plant condition, area, growth rate and PPC, we show that it was possible to identify eight out of the top 10 highest yielding accessions and that only five accessions produced high yield under both treatments. Apart from showcasing multi-temporal UAV-based phenotyping capabilities for the assessment of plant performance, this research has implications for agronomic studies of plant salt tolerance and for optimizing agricultural production under saline conditions

Harness the power of genomic selection and the potential of germplasm in crop breeding for global food security in the era with rapid climate change

Crop genetic improvements catalysed population growth, which in turn has increased the pressure for food security. We need to produce 70% more food to meet the demands of 9.5 billion people by 2050. Climate changes have posed challenges for global food supply, while the narrow genetic base of elite crop cultivars has further limited our capacity to increase genetic gain through conventional breeding. The effective utilization of genetic resources in germplasm collections for crop improvement is crucial to increasing genetic gain to address challenges in the global food supply. Genomic selection (GS) uses genome-wide markers and phenotype information from observed populations to establish associations, followed by genome-wide markers to predict phenotypic values in test populations. Characterizing an extensive germplasm collection can serve a dual purpose in GS, as a reference population for predicting model, and mining desirable genetic variants for incorporation into elite cultivars. New technologies, such as high-throughput genotyping and phenotyping, machine learning, and gene editing, have great potential to contribute to genome-assisted breeding. Breeding programmes integrating germplasm characterization, GS and emerging technologies offer promise for accelerating the development of cultivars with improved yield and enhanced resistance and tolerance to biotic and abiotic stresses. Finally, scientifically informed regulations on new breeding technologies, and increased sharing of genetic resources, genomic data, and bioinformatics expertise between developed and developing economies will be the key to meeting the challenges of the rapidly changing climate and increased demand for food

Remote Sensing for Precision Nitrogen Management

This book focuses on the fundamental and applied research of the non-destructive estimation and diagnosis of crop leaf and plant nitrogen status and in-season nitrogen management strategies based on leaf sensors, proximal canopy sensors, unmanned aerial vehicle remote sensing, manned aerial remote sensing and satellite remote sensing technologies. Statistical and machine learning methods are used to predict plant-nitrogen-related parameters with sensor data or sensor data together with soil, landscape, weather and/or management information. Different sensing technologies or different modelling approaches are compared and evaluated. Strategies are developed to use crop sensing data for in-season nitrogen recommendations to improve nitrogen use efficiency and protect the environment

Uumanned Aerial Vehicle Data Analysis For High-throughput Plant Phenotyping

The continuing population is placing unprecedented demands on worldwide crop yield production and quality. Improving genomic selection for breeding process is one essential aspect for solving this dilemma. Benefitted from the advances in high-throughput genotyping, researchers already gained better understanding of genetic traits. However, given the comparatively lower efficiency in current phenotyping technique, the significance of phenotypic traits has still not fully exploited in genomic selection. Therefore, improving HTPP efficiency has become an urgent task for researchers. As one of the platforms utilized for collecting HTPP data, unmanned aerial vehicle (UAV) allows high quality data to be collected within short time and by less labor. There are currently many options for customized UAV system on market; however, data analysis efficiency is still one limitation for the fully implementation of HTPP. To this end, the focus of this program was data analysis of UAV acquired data. The specific objectives were two-fold, one was to investigate statistical correlations between UAV derived phenotypic traits and manually measured sorghum biomass, nitrogen and chlorophyll content. Another was to conduct variable selection on the phenotypic parameters calculated from UAV derived vegetation index (VI) and plant height maps, aiming to find out the principal parameters that contribute most in explaining winter wheat grain yield. Corresponding, two studies were carried out. Good correlations between UAV-derived VI/plant height and sorghum biomass/nitrogen/chlorophyll in the first study suggested that UAV-based HTPP has great potential in facilitating genetic improvement. For the second study, variable selection results from the single-year data showed that plant height related parameters, especially from later season, contributed more in explaining grain yield. Advisor: Yeyin Sh

In Vivo Phenotyping for the Early Detection of Drought Stress in Tomato

Drought stress imposes a major constraint over a crop yield and can be expected to grow in importance if the climate change predicted comes about. Improved methods are needed to facilitate crop management via the prompt detection of the onset of stress. Here, we report the use of an in vivo OECT (organic electrochemical transistor) sensor, termed as bioristor, in the context of the drought response of the tomato plant. The device was integrated within the plant's stem, thereby allowing for the continuous monitoring of the plant's physiological status throughout its life cycle. Bioristor was able to detect changes of ion concentration in the sap upon drought, in particular, those dissolved and transported through the transpiration stream, thus efficiently detecting the occurrence of drought stress immediately after the priming of the defence responses. The bioristor's acquired data were coupled with those obtained in a high-throughput phenotyping platform revealing the extreme complementarity of these methods to investigate the mechanisms triggered by the plant during the drought stress event

New strategies for row-crop management based on cost-effective remote sensors

Agricultural technology can be an excellent antidote to resource scarcity. Its growth has led to the extensive study of spatial and temporal in-field variability. The challenge of accurate management has been addressed in recent years through the use of accurate high-cost measurement instruments by researchers. However, low rates of technological adoption by farmers motivate the development of alternative technologies based on affordable sensors, in order to improve the sustainability of agricultural biosystems. This doctoral thesis has as main objective the development and evaluation of systems based on affordable sensors, in order to address two of the main aspects affecting the producers: the need of an accurate plant water status characterization to perform a proper irrigation management and the precise weed control. To address the first objective, two data acquisition methodologies based on aerial platforms have been developed, seeking to compare the use of infrared thermometry and thermal imaging to determine the water status of two most relevant row-crops in the region, sugar beet and super high-density olive orchards. From the data obtained, the use of an airborne low-cost infrared sensor to determine the canopy temperature has been validated. Also the reliability of sugar beet canopy temperature as an indicator its of water status has been confirmed. The empirical development of the Crop Water Stress Index (CWSI) has also been carried out from aerial thermal imaging combined with infrared temperature sensors and ground measurements of factors such as water potential or stomatal conductance, validating its usefulness as an indicator of water status in super high-density olive orchards. To contribute to the development of precise weed control systems, a system for detecting tomato plants and measuring the space between them has been developed, aiming to perform intra-row treatments in a localized and precise way. To this end, low cost optical sensors have been used and compared with a commercial LiDAR laser scanner. Correct detection results close to 95% show that the implementation of these sensors can lead to promising advances in the automation of weed control. The micro-level field data collected from the evaluated affordable sensors can help farmers to target operations precisely before plant stress sets in or weeds infestation occurs, paving the path to increase the adoption of Precision Agriculture techniques

Quinoa phenotyping methodologies: An international consensus

Quinoa is a crop originating in the Andes but grown more widely and with the genetic potential for significant further expansion. Due to the phenotypic plasticity of quinoa, varieties need to be assessed across years and multiple locations. To improve comparability among field trials across the globe and to facilitate collaborations, components of the trials need to be kept consistent, including the type and methods of data collected. Here, an internationally open-access framework for phenotyping a wide range of quinoa features is proposed to facilitate the systematic agronomic, physiological and genetic characterization of quinoa for crop adaptation and improvement. Mature plant phenotyping is a central aspect of this paper, including detailed descriptions and the provision of phenotyping cards to facilitate consistency in data collection. High-throughput methods for multi-temporal phenotyping based on remote sensing technologies are described. Tools for higher-throughput post-harvest phenotyping of seeds are presented. A guideline for approaching quinoa field trials including the collection of environmental data and designing layouts with statistical robustness is suggested. To move towards developing resources for quinoa in line with major cereal crops, a database was created. The Quinoa Germinate Platform will serve as a central repository of data for quinoa researchers globally.Fil: Stanschewski, Clara S.. King Abdullah University of Science and Technology; Arabia SauditaFil: Rey, Elodie. King Abdullah University of Science and Technology; Arabia SauditaFil: Fiene, Gabriele. King Abdullah University of Science and Technology; Arabia SauditaFil: Craine, Evan B.. Washington State University; Estados UnidosFil: Wellman, Gordon. King Abdullah University of Science and Technology; Arabia SauditaFil: Melino, Vanessa J.. King Abdullah University of Science and Technology; Arabia SauditaFil: Patiranage, Dilan S. R.. King Abdullah University of Science and Technology; Arabia SauditaFil: Johansen, Kasper. King Abdullah University of Science and Technology; Arabia SauditaFil: Schmöckel, Sandra M.. King Abdullah University of Science and Technology; Arabia SauditaFil: Bertero, Hector Daniel. Universidad de Buenos Aires. Facultad de Agronomía. Departamento de Producción Vegetal. Cátedra de Producción Vegetal; Argentina. Consejo Nacional de Investigaciones Científicas y Técnicas. Oficina de Coordinación Administrativa Parque Centenario. Instituto de Investigaciones Fisiológicas y Ecológicas Vinculadas a la Agricultura. Universidad de Buenos Aires. Facultad de Agronomía. Instituto de Investigaciones Fisiológicas y Ecológicas Vinculadas a la Agricultura; ArgentinaFil: Oakey, Helena. University of Adelaide; AustraliaFil: Colque Little, Carla. Universidad de Copenhagen; DinamarcaFil: Afzal, Irfan. University of Agriculture; PakistánFil: Raubach, Sebastian. The James Hutton Institute; Reino UnidoFil: Miller, Nathan. University of Wisconsin; Estados UnidosFil: Streich, Jared. Oak Ridge National Laboratory; Estados UnidosFil: Amby, Daniel Buchvaldt. Universidad de Copenhagen; DinamarcaFil: Emrani, Nazgol. Christian-albrechts-universität Zu Kiel; AlemaniaFil: Warmington, Mark. Agriculture And Food; AustraliaFil: Mousa, Magdi A. A.. Assiut University; Arabia Saudita. King Abdullah University of Science and Technology; Arabia SauditaFil: Wu, David. Shanxi Jiaqi Agri-Tech Co.; ChinaFil: Jacobson, Daniel. Oak Ridge National Laboratory; Estados UnidosFil: Andreasen, Christian. Universidad de Copenhagen; DinamarcaFil: Jung, Christian. Christian-albrechts-universität Zu Kiel; AlemaniaFil: Murphy, Kevin. Washington State University; Estados UnidosFil: Bazile, Didier. Savoirs, Environnement, Sociétés; Francia. Universite Paul-valery Montpellier Iii; FranciaFil: Tester, Mark. King Abdullah University of Science and Technology; Arabia Saudit

Quinoa Phenotyping Methodologies: An International Consensus

Quinoa is a crop originating in the Andes but grown more widely and with the genetic potential for significant further expansion. Due to the phenotypic plasticity of quinoa, varieties need to be assessed across years and multiple locations. To improve comparability among field trials across the globe and to facilitate collaborations, components of the trials need to be kept consistent, including the type and methods of data collected. Here, an internationally open-access framework for phenotyping a wide range of quinoa features is proposed to facilitate the systematic agronomic, physiological and genetic characterization of quinoa for crop adaptation and improvement. Mature plant phenotyping is a central aspect of this paper, including detailed descriptions and the provision of phenotyping cards to facilitate consistency in data collection. High-throughput methods for multi-temporal phenotyping based on remote sensing technologies are described. Tools for higher-throughput post-harvest phenotyping of seeds are presented. A guideline for approaching quinoa field trials including the collection of environmental data and designing layouts with statistical robustness is suggested. To move towards developing resources for quinoa in line with major cereal crops, a database was created. The Quinoa Germinate Platform will serve as a central repository of data for quinoa researchers globally.EEA FamailláFil: Stanschewski, Clara S. King Abdullah University of Science and Technology. Center for Desert Agriculture, Biological and Environmental Sciences and Engineering Division; Arabia SauditaFil: Rey, Elodie. King Abdullah University of Science and Technology. Center for Desert Agriculture, Biological and Environmental Sciences and Engineering Division; Arabia SauditaFil: Fiene, Gabriele. King Abdullah University of Science and Technology. Center for Desert Agriculture, Biological and Environmental Sciences and Engineering Division; Arabia SauditaFil: Craine, Evan B. Washington State University. Department of Crop and Soil Sciences; Estados UnidosFil: Wellman, Gordon. King Abdullah University of Science and Technology. Center for Desert Agriculture, Biological and Environmental Sciences and Engineering Division; Arabia SauditaFil: Melino, Vanessa J. King Abdullah University of Science and Technology. Center for Desert Agriculture, Biological and Environmental Sciences and Engineering Division; Arabia SauditaFil: Patiranage, Dilan S.R. King Abdullah University of Science and Technology. Center for Desert Agriculture, Biological and Environmental Sciences and Engineering Division; Arabia SauditaFil: Patiranage, Dilan S.R. Christian-Albrechts-University of Kiel. Plant Breeding Institute; AlemaniaFil: Johansen, Kasper. King Abdullah University of Science and Technology. Water Desalination and Reuse Center; Arabia SauditaFil: Schmöckel, Sandra M. University of Hohenheim. Institute of Crop Science. Department Physiology of Yield Stability; AlemaniaFil: Erazzu, Luis Ernesto. Instituto Nacional de Tecnología Agropecuaria (INTA). Estación Experimental Agropecuaria Famaillá; Argentina.Fil: Tester, Mark. King Abdullah University of Science and Technology. Center for Desert Agriculture, Biological and Environmental Sciences and Engineering Division; Arabia Saudit