19 research outputs found
A Methodology for Efficient Space-Time Adapter Design Space Exploration: A Case Study of an Ultra Wide Band Interleaver
This paper presents a solution to efficiently explore the design space of
communication adapters. In most digital signal processing (DSP) applications,
the overall architecture of the system is significantly affected by
communication architecture, so the designers need specifically optimized
adapters. By explicitly modeling these communications within an effective
graph-theoretic model and analysis framework, we automatically generate an
optimized architecture, named Space-Time AdapteR (STAR). Our design flow inputs
a C description of Input/Output data scheduling, and user requirements
(throughput, latency, parallelism...), and formalizes communication constraints
through a Resource Constraints Graph (RCG). The RCG properties enable an
efficient architecture space exploration in order to synthesize a STAR
component. The proposed approach has been tested to design an industrial data
mixing block example: an Ultra-Wideband interleaver.Comment: ISBN:1-4244-0921-
A Design Methodology for Space-Time Adapter
This paper presents a solution to efficiently explore the design space of
communication adapters. In most digital signal processing (DSP) applications,
the overall architecture of the system is significantly affected by
communication architecture, so the designers need specifically optimized
adapters. By explicitly modeling these communications within an effective
graph-theoretic model and analysis framework, we automatically generate an
optimized architecture, named Space-Time AdapteR (STAR). Our design flow inputs
a C description of Input/Output data scheduling, and user requirements
(throughput, latency, parallelism...), and formalizes communication constraints
through a Resource Constraints Graph (RCG). The RCG properties enable an
efficient architecture space exploration in order to synthesize a STAR
component. The proposed approach has been tested to design an industrial data
mixing block example: an Ultra-Wideband interleaver.Comment: ISBN : 978-1-59593-606-
Master of Science
thesisThis thesis designs, implements, and evaluates modular Open Core Protocol (OCP) interfaces for Intellectual Property (IP) cores and Network-on-Chip (NoC) that re- duces System-On-Chip (SoC) design time and enables research on di erent architectural sequencing control methods. To utilize the NoCs design time optimization feature at the boundaries, a standardized industry socket was required, which can address the SoC shorter time-to-market requirements, design issues, and also the subsequent reuse of developed IP cores. OCP is an open industry standard socket interface speci cation used in this research to enable the IP cores reusability across multiple SoC designs. This research work designs and implements clocked OCP interfaces between IP cores and On-Chip Network Fabric (NoC), in single- and multi- frequency clocked domains. The NoC interfaces between IP cores and on-chip network fabric are implemented using the standard network interface structure. It consists of back-end and front-end submodules corresponding to customized interfaces to IP cores or network fabric and OCP Master and Slave entities, respectively. A generic domain interface (DI) protocol is designed which acts as the bridge between back-end and front-end submodules for synchronization and data ow control. Clocked OCP interfaces are synthesized, placed and routed using IBM's 65nm process technology. The implemented designs are veri ed for OCP compliance using SOLV (Sonics OCP Library for Veri cation). Finally, this thesis reports the performance metrics such as design target frequency of operation, latency, area, energy per transaction, and maximum bandwidth across network on-chip for single- and multifrequency clocked designs
Modeling and automated synthesis of reconfigurable interfaces
Stefan IhmorPaderborn, Univ., Diss., 200
Integrated input modeling and memory management for image processing applications
Image processing applications often demand powerful calculations and real-time performance with low power and energy consumption. Programmable hardware provides inherent parallelism and flexibility making it a good implementation choice for this application domain. In this work we introduce a new modeling technique combining Cyclo-Static Dataflow (CSDF) base model semantics and Homogeneous Parameterized Dataflow (HPDF) meta-modeling framework, which exposes more levels of parallelism than previous models and can be used to reduce buffer sizes. We model two different applications and show how we can achieve efficient scheduling and memory organization, which is crucial for this application domain, since large amounts of data are processed, and storing intermediate results usually requires the use of off-chip resources, causing slower data access and higher power consumption. We also designed a reusable wishbone compliant memory controller module that can be used to access the Xilinx Multimedia Boardâs memory chips using single accesses or burst mode
A coarse-grained dynamically reconfigurable MAC processor for power-sensitive multi-standard devices
DRMP, a Dynamically Reconfigurable MAC Processor, is an innovative, dynamically reconfigurable System-on-Chip architecture. The architecture exploits substantial overlaps in the functionality of different wireless MAC layers. Its flexibility is specialized for addressing the requirements of the MAC layer of wireless standards. It is targeted at consumer, multi-standard, handheld devices, and its design is meant to address the balance of flexibility and power-efficiency that this target market demands. The DRMP reconfigures packet-by-packet on the fly, allowing execution of concurrent protocol modes on a single hardware co-processor. An interrupt-driven programming model has also been presented and shown to implement the protocol state-machine of the three protocols on a CPU. These features will allow the DRMP to replace three MAC processors in a hand-held device. The most innovative component of the DRMP architecture is its Interface and Reconfiguration Controller. It uses a combination of asynchronous controllers to dynamically reconfigure the functional units in the architecture and delegate MAC tasks to them. The architecture has been modeled in Simulink at cycle-approximate abstraction. Results of simulations involving transmission and reception of packets have been presented, showing that the platform concurrently handles three protocol streams, reconfigures dynamically, yet meets and exceeds the protocol timing constraints, all at a moderate frequency. Its heterogeneous and coarse-grained functional units, limited connectivity requirements between these units, and proportionally large time that these resources are idle, promise a very modest power-consumption, suitable for mobile devices, while offering flexibility to implement different MAC protocols
Communication centric platforms for future high data intensive applications
The notion of platform based design is considered as a viable solution to boost the
design productivity by favouring reuse design methodology. With the scaling down of
device feature size and scaling up of design complexity, throughput limitations, signal
integrity and signal latency are becoming a bottleneck in future communication centric
System-on-Chip (SoC) design. This has given birth to communication centric platform
based designs.
Development of heterogeneous multi-core architectures has caused the on-chip
communication medium tailored for a specific application domain to deal with multidomain
traffic patterns. This makes the current application specific communication centric
platforms unsuitable for future SoC architectures.
The work presented in this thesis, endeavours to explore the current
communication media to establish the expectations from future on-chip interconnects. A
novel communication centric platform based design flow is proposed, which consists of
four communication centric platforms that are based on shared global bus, hierarchical
bus, crossbars and a novel hybrid communication medium. Developed with a smart
platform controller, the platforms support Open Core Protocol (OCP) socket standard,
allowing cores to integrate in a plug and play fashion without the need to reprogram the
pre-verified platforms. This drastically reduces the design time of SoC architectures. Each
communication centric platform has different throughput, area and power characteristics,
thus, depending on the design constraints, processing cores can be integrated to the most
appropriate communication platform to realise the desired SoC architecture.
A novel hybrid communication medium is also developed in this thesis, which
combines the advantages of two different types of communication media in a single SoC
architecture. The hybrid communication medium consists of crossbar matrix and shared
bus medium . Simulation results and implementation of WiMAX receiver as a real-life
example shows a 65% increase in data throughput than shared bus based communication
medium, 13% decrease in area and 11% decrease in power than crossbar based
communication medium.
In order to automate the generation of SoC architectures with optimised
communication architectures, a tool called SOCCAD (SoC Communication architecture
development) is developed. Components needed for the realisation of the given application
can be selected from the toolâs in-built library. Offering an optimised communication
centric placement, the tool generates the complete SystemC code for the system with
different interconnect architectures, along with its power and area characteristics. The
generated SystemC code can be used for quick simulation and coupled with efficient test
benches can be used for quick verification.
Network-on-Chip (NoC) is considered as a solution to the communication
bottleneck in future SoC architectures with data throughput requirements of over 10GB/s.
It aims to provide low power, efficient link utilisation, reduced data contention and
reduced area on silicon. Current on-chip networks, developed with fixed architectural
parameters, do not utilise the available resources efficiently. To increase this efficiency, a
novel dynamically reconfigurable NoC (drNoC) is developed in this thesis. The proposed
drNoC reconfigures itself in terms of switching, routing and packet size with the changing
communication requirements of the system at run time, thus utilising the maximum
available channel bandwidth. In order to increase the applicability of drNoC, the network
interface is designed to support OCP socket standard. This makes drNoC a highly reuseable
communication framework, qualifying it as a communication centric platform for
high data intensive SoC architectures. Simulation results show a 32% increase in data
throughput and 22-35% decrease in network delay when compared with a traditional NoC
with fixed parameters
A Modular Approach to Adaptive Reactive Streaming Systems
The latest generations of FPGA devices offer large resource counts that provide the headroom to implement large-scale and complex systems. However, there are increasing challenges for the designer, not just because of pure size and complexity, but also in harnessing effectively the flexibility and programmability of the FPGA. A central issue is the need to integrate modules from diverse sources to promote modular design and reuse. Further, the capability to perform dynamic partial reconfiguration (DPR) of FPGA devices means that implemented systems can be made reconfigurable, allowing components to be changed during operation. However, use of DPR typically requires low-level planning of the system implementation, adding to the design challenge. This dissertation presents ReShape: a high-level approach for designing systems by interconnecting modules, which gives a âplug and playâ look and feel to the designer, is supported by tools that carry out implementation and verification functions, and is carried through to support system reconfiguration during operation. The emphasis is on the inter-module connections and abstracting the communication patterns that are typical between modules â for example, the streaming of data that is common in many FPGA-based systems, or the reading and writing of data to and from memory modules. ShapeUp is also presented as the static precursor to ReShape. In both, the details of wiring and signaling are hidden from view, via metadata associated with individual modules. ReShape allows system reconfiguration at the module level, by supporting type checking of replacement modules and by managing the overall system implementation, via metadata associated with its FPGA floorplan. The methodology and tools have been implemented in a prototype for a broad domain-specific setting â networking systems â and have been validated on real telecommunications design projects