Arithmetic Operations in Multi-Valued Logic

This paper presents arithmetic operations like addition, subtraction and multiplications in Modulo-4 arithmetic, and also addition, multiplication in Galois field, using multi-valued logic (MVL). Quaternary to binary and binary to quaternary converters are designed using down literal circuits. Negation in modular arithmetic is designed with only one gate. Logic design of each operation is achieved by reducing the terms using Karnaugh diagrams, keeping minimum number of gates and depth of net in to consideration. Quaternary multiplier circuit is proposed to achieve required optimization. Simulation result of each operation is shown separately using Hspice.Comment: 12 Pages, VLSICS Journal 201

The construction of self-dual normal polynomials over GF(2) and their applications to the Massey-Omura algorithm

Gaussian periods are used to locate a normal element of the finite field GF(2e) of odd degree e and an algorithm is presented for the construction of self-dual normal polynomials over GF(2) for any odd degree. This gives a new constructive proof of the existence of a self-dual basis for odd degree. The use of such polynomials in the Massey-Omura multiplier improves the efficiency and decreases the complexity of the multiplie

Speeding up a scalable modular inversion hardware architecture

The modular inversion is a fundamental process in several cryptographic systems. It can be computed in software or hardware, but hardware computation proven to be faster and more secure. This research focused on improving an old scalable inversion hardware architecture proposed in 2004 for finite field GF(p). The architecture has been made of two parts, a computing unit and a memory unit. The memory unit is to hold all the data bits of computation whereas the computing unit performs all the arithmetic operations in word (digit) by word bases known as scalable method. The main objective of this project was to investigate the cost and benefit of modifying the memory unit to include parallel shifting, which was one of the tasks of the scalable computing unit. The study included remodeling the entire hardware architecture removing the shifter from the scalable computing part embedding it in the memory unit instead. This modification resulted in a speedup to the complete inversion process with an area increase due to the new memory shifting unit. Quantitative measurements of the speed area trade-off have been investigated. The results showed that the extra hardware to be added for this modification compared to the speedup gained, giving the user the complete picture to choose from depending on the application need.the British council in Saudi Arabia, KFUPM, Dr. Tatiana Kalganova at the Electrical & Computer Engineering Department of Brunel University in Uxbridg

Multiple bit error correcting architectures over finite fields

This thesis proposes techniques to mitigate multiple bit errors in GF arithmetic circuits. As GF arithmetic circuits such as multipliers constitute the complex and important functional unit of a crypto-processor, making them fault tolerant will improve the reliability of circuits that are employed in safety applications and the errors may cause catastrophe if not mitigated. Firstly, a thorough literature review has been carried out. The merits of efficient schemes are carefully analyzed to study the space for improvement in error correction, area and power consumption. Proposed error correction schemes include bit parallel ones using optimized BCH codes that are useful in applications where power and area are not prime concerns. The scheme is also extended to dynamically correcting scheme to reduce decoder delay. Other method that suits low power and area applications such as RFIDs and smart cards using cross parity codes is also proposed. The experimental evaluation shows that the proposed techniques can mitigate single and multiple bit errors with wider error coverage compared to existing methods with lesser area and power consumption. The proposed scheme is used to mask the errors appearing at the output of the circuit irrespective of their cause. This thesis also investigates the error mitigation schemes in emerging technologies (QCA, CNTFET) to compare area, power and delay with existing CMOS equivalent. Though the proposed novel multiple error correcting techniques can not ensure 100% error mitigation, inclusion of these techniques to actual design can improve the reliability of the circuits or increase the difficulty in hacking crypto-devices. Proposed schemes can also be extended to non GF digital circuits

Throughput/Area-efficient ECC Processor Using Montgomery Point Multiplication on FPGA

High throughput while maintaining low resource is a key issue for elliptic curve cryptography (ECC) hardware implementations in many applications. In this brief, an ECC processor architecture over Galois fields is presented, which achieves the best reported throughput/area performance on field-programmable gate array (FPGA) to date. A novel segmented pipelining digit serial multiplier is developed to speed up ECC point multiplication. To achieve low latency, a new combined algorithm is developed for point addition and point doubling with careful scheduling. A compact and flexible distributed-RAM-based memory unit design is developed to increase speed while keeping area low. Further optimizations were made via timing constraints and logic level modifications at the implementation level. The proposed architecture is implemented on Virtex4 (V4), Virtex5 (V5), and Virtex7 (V7) FPGA technologies and, respectively, achieved throughout/slice figures of 19.65, 65.30, and 64.48 (106/(Seconds × Slices))

Towards a triple mode common operator FFT for Software Radio systems

International audienceA scenario to design a Triple Mode FFT is addressed. Based on a Dual Mode FFT structure, we present a methodology to reach a triple mode FFT operator (TMFFT) able to operate over three different fields: complex number domain C, Galois Fields GF(Ft) and GF(2m). We propose a reconfigurable Triple mode Multiplier that constitutes the core of the Butterflybased FFT. A scalable and flexible unit for the polynomial reduction needed in the GF(2m) multiplication is also proposed. An FPGA implementation of the proposed multiplier is given and the measures show a gain of 18%in terms of performance-to-cost ratio compared to a "Velcro" approach where two self-contained operators are implemented separately

A VLSI synthesis of a Reed-Solomon processor for digital communication systems

The Reed-Solomon codes have been widely used in digital communication systems such as computer networks, satellites, VCRs, mobile communications and high- definition television (HDTV), in order to protect digital data against erasures, random and burst errors during transmission. Since the encoding and decoding algorithms for such codes are computationally intensive, special purpose hardware implementations are often required to meet the real time requirements. -- One motivation for this thesis is to investigate and introduce reconfigurable Galois field arithmetic structures which exploit the symmetric properties of available architectures. Another is to design and implement an RS encoder/decoder ASIC which can support a wide family of RS codes. -- An m-programmable Galois field multiplier which uses the standard basis representation of the elements is first introduced. It is then demonstrated that the exponentiator can be used to implement a fast inverter which outperforms the available inverters in GF(2m). Using these basic structures, an ASIC design and synthesis of a reconfigurable Reed-Solomon encoder/decoder processor which implements a large family of RS codes is proposed. The design is parameterized in terms of the block length n, Galois field symbol size m, and error correction capability t for the various RS codes. The design has been captured using the VHDL hardware description language and mapped onto CMOS standard cells available in the 0.8-µm BiCMOS design kits for Cadence and Synopsys tools. The experimental chip contains 218,206 logic gates and supports values of the Galois field symbol size m = 3,4,5,6,7,8 and error correction capability t = 1,2,3, ..., 16. Thus, the block length n is variable from 7 to 255. Error correction t and Galois field symbol size m are pin-selectable. -- Since low design complexity and high throughput are desired in the VLSI chip, the algebraic decoding technique has been investigated instead of the time or transform domain. The encoder uses a self-reciprocal generator polynomial which structures the codewords in a systematic form. At the beginning of the decoding process, received words are initially stored in the first-in-first-out (FIFO) buffer as they enter the syndrome module. The Berlekemp-Massey algorithm is used to determine both the error locator and error evaluator polynomials. The Chien Search and Forney's algorithms operate sequentially to solve for the error locations and error values respectively. The error values are exclusive or-ed with the buffered messages in order to correct the errors, as the processed data leave the chip