347 research outputs found
The effective combating of intrusion attacks through fuzzy logic and neural networks
The importance of properly securing an organization’s information and computing resources has become paramount in modern business. Since the advent of the Internet, securing this organizational information has become increasingly difficult. Organizations deploy many security mechanisms in the protection of their data, intrusion detection systems in particular have an increasingly valuable role to play, and as networks grow, administrators need better ways to monitor their systems. Currently, many intrusion detection systems lack the means to accurately monitor and report on wireless segments within the corporate network. This dissertation proposes an extension to the NeGPAIM model, known as NeGPAIM-W, which allows for the accurate detection of attacks originating on wireless network segments. The NeGPAIM-W model is able to detect both wired and wireless based attacks, and with the extensions to the original model mentioned previously, also provide for correlation of intrusion attacks sourced on both wired and wireless network segments. This provides for a holistic detection strategy for an organization. This has been accomplished with the use of Fuzzy logic and neural networks utilized in the detection of attacks. The model works on the assumption that each user has, and leaves, a unique footprint on a computer system. Thus, all intrusive behaviour on the system and networks which support it, can be traced back to the user account which was used to perform the intrusive behavior
Evidence Fusion using D-S Theory: utilizing a progressively evolving reliability factor in wireless networks
The Dempster-Shafer (D-S) theory provides a method to combine evidence from multiple nodes to estimate the likelihood of an intrusion. The theory\u27s rule of combination gives a numerical method to fuse multiple pieces of information to derive a conclusion. But, D-S theory has its shortcomings when used in situations where evidence has significant conflict. Though the observers may have different values of uncertainty in the observed data, D-S theory considers the observers to be equally trustworthy. This thesis introduces a new method of combination based on D-S theory and Consensus method, that takes into consideration the reliability of evidence used in data fusion. The new method\u27s results have been compared against three other methods of evidence fusion to objectively analyze how they perform under Denial of Service attacks and Xmas tree scan attacks
Deep Transfer Learning Applications in Intrusion Detection Systems: A Comprehensive Review
Globally, the external Internet is increasingly being connected to the
contemporary industrial control system. As a result, there is an immediate need
to protect the network from several threats. The key infrastructure of
industrial activity may be protected from harm by using an intrusion detection
system (IDS), a preventive measure mechanism, to recognize new kinds of
dangerous threats and hostile activities. The most recent artificial
intelligence (AI) techniques used to create IDS in many kinds of industrial
control networks are examined in this study, with a particular emphasis on
IDS-based deep transfer learning (DTL). This latter can be seen as a type of
information fusion that merge, and/or adapt knowledge from multiple domains to
enhance the performance of the target task, particularly when the labeled data
in the target domain is scarce. Publications issued after 2015 were taken into
account. These selected publications were divided into three categories:
DTL-only and IDS-only are involved in the introduction and background, and
DTL-based IDS papers are involved in the core papers of this review.
Researchers will be able to have a better grasp of the current state of DTL
approaches used in IDS in many different types of networks by reading this
review paper. Other useful information, such as the datasets used, the sort of
DTL employed, the pre-trained network, IDS techniques, the evaluation metrics
including accuracy/F-score and false alarm rate (FAR), and the improvement
gained, were also covered. The algorithms, and methods used in several studies,
or illustrate deeply and clearly the principle in any DTL-based IDS subcategory
are presented to the reader
A critical review of cyber-physical security for building automation systems
Modern Building Automation Systems (BASs), as the brain that enables the
smartness of a smart building, often require increased connectivity both among
system components as well as with outside entities, such as optimized
automation via outsourced cloud analytics and increased building-grid
integrations. However, increased connectivity and accessibility come with
increased cyber security threats. BASs were historically developed as closed
environments with limited cyber-security considerations. As a result, BASs in
many buildings are vulnerable to cyber-attacks that may cause adverse
consequences, such as occupant discomfort, excessive energy usage, and
unexpected equipment downtime. Therefore, there is a strong need to advance the
state-of-the-art in cyber-physical security for BASs and provide practical
solutions for attack mitigation in buildings. However, an inclusive and
systematic review of BAS vulnerabilities, potential cyber-attacks with impact
assessment, detection & defense approaches, and cyber-secure resilient control
strategies is currently lacking in the literature. This review paper fills the
gap by providing a comprehensive up-to-date review of cyber-physical security
for BASs at three levels in commercial buildings: management level, automation
level, and field level. The general BASs vulnerabilities and protocol-specific
vulnerabilities for the four dominant BAS protocols are reviewed, followed by a
discussion on four attack targets and seven potential attack scenarios. The
impact of cyber-attacks on BASs is summarized as signal corruption, signal
delaying, and signal blocking. The typical cyber-attack detection and defense
approaches are identified at the three levels. Cyber-secure resilient control
strategies for BASs under attack are categorized into passive and active
resilient control schemes. Open challenges and future opportunities are finally
discussed.Comment: 38 pages, 7 figures, 6 tables, submitted to Annual Reviews in Contro
A Survey of Security in UAVs and FANETs: Issues, Threats, Analysis of Attacks, and Solutions
Thanks to the rapidly developing technology, unmanned aerial vehicles (UAVs)
are able to complete a number of tasks in cooperation with each other without
need for human intervention. In recent years, UAVs, which are widely utilized
in military missions, have begun to be deployed in civilian applications and
mostly for commercial purposes. With their growing numbers and range of
applications, UAVs are becoming more and more popular; on the other hand, they
are also the target of various threats which can exploit various
vulnerabilities of UAV systems in order to cause destructive effects. It is
therefore critical that security is ensured for UAVs and the networks that
provide communication between UAVs. In this survey, we aimed to present a
comprehensive detailed approach to security by classifying possible attacks
against UAVs and flying ad hoc networks (FANETs). We classified the security
threats into four major categories that make up the basic structure of UAVs;
hardware attacks, software attacks, sensor attacks, and communication attacks.
In addition, countermeasures against these attacks are presented in separate
groups as prevention and detection. In particular, we focus on the security of
FANETs, which face significant security challenges due to their characteristics
and are also vulnerable to insider attacks. Therefore, this survey presents a
review of the security fundamentals for FANETs, and also four different routing
attacks against FANETs are simulated with realistic parameters and then
analyzed. Finally, limitations and open issues are also discussed to direct
future wor
Progress in ambient assisted systems for independent living by the elderly
One of the challenges of the ageing population in many countries is the efficient delivery of health and care services, which is further complicated by the increase in neurological conditions among the elderly due to rising life expectancy. Personal care of the elderly is of concern to their relatives, in case they are alone in their homes and unforeseen circumstances occur, affecting their wellbeing. The alternative; i.e. care in nursing homes or hospitals is costly and increases further if specialized care is mobilized to patients’ place of residence. Enabling technologies for independent living by the elderly such as the ambient assisted living systems (AALS) are seen as essential to enhancing care in a cost-effective manner. In light of significant advances in telecommunication, computing and sensor miniaturization, as well as the ubiquity of mobile and connected devices embodying the concept of the Internet of Things (IoT), end-to-end solutions for ambient assisted living have become a reality. The premise of such applications is the continuous and most often real-time monitoring of the environment and occupant behavior using an event-driven intelligent system, thereby providing a facility for monitoring and assessment, and triggering assistance as and when needed. As a growing area of research, it is essential to investigate the approaches for developing AALS in literature to identify current practices and directions for future research. This paper is, therefore, aimed at a comprehensive and critical review of the frameworks and sensor systems used in various ambient assisted living systems, as well as their objectives and relationships with care and clinical systems. Findings from our work suggest that most frameworks focused on activity monitoring for assessing immediate risks while the opportunities for integrating environmental factors for analytics and decision-making, in particular for the long-term care were often overlooked. The potential for wearable devices and sensors, as well as distributed storage and access (e.g. cloud) are yet to be fully appreciated. There is a distinct lack of strong supporting clinical evidence from the implemented technologies. Socio-cultural aspects such as divergence among groups, acceptability and usability of AALS were also overlooked. Future systems need to look into the issues of privacy and cyber security
Navigating the IoT landscape: Unraveling forensics, security issues, applications, research challenges, and future
Given the exponential expansion of the internet, the possibilities of
security attacks and cybercrimes have increased accordingly. However, poorly
implemented security mechanisms in the Internet of Things (IoT) devices make
them susceptible to cyberattacks, which can directly affect users. IoT
forensics is thus needed for investigating and mitigating such attacks. While
many works have examined IoT applications and challenges, only a few have
focused on both the forensic and security issues in IoT. Therefore, this paper
reviews forensic and security issues associated with IoT in different fields.
Future prospects and challenges in IoT research and development are also
highlighted. As demonstrated in the literature, most IoT devices are vulnerable
to attacks due to a lack of standardized security measures. Unauthorized users
could get access, compromise data, and even benefit from control of critical
infrastructure. To fulfil the security-conscious needs of consumers, IoT can be
used to develop a smart home system by designing a FLIP-based system that is
highly scalable and adaptable. Utilizing a blockchain-based authentication
mechanism with a multi-chain structure can provide additional security
protection between different trust domains. Deep learning can be utilized to
develop a network forensics framework with a high-performing system for
detecting and tracking cyberattack incidents. Moreover, researchers should
consider limiting the amount of data created and delivered when using big data
to develop IoT-based smart systems. The findings of this review will stimulate
academics to seek potential solutions for the identified issues, thereby
advancing the IoT field.Comment: 77 pages, 5 figures, 5 table
A Novel Cooperative Intrusion Detection System for Mobile Ad Hoc Networks
Mobile ad hoc networks (MANETs) have experienced rapid growth in their use for various military, medical, and commercial scenarios. This is due to their dynamic nature that enables the deployment of such networks, in any target environment, without the need for a pre-existing infrastructure. On the other hand, the unique characteristics of MANETs, such as the lack of central networking points, limited wireless range, and constrained resources, have made the quest for securing such networks a challenging task. A large number of studies have focused on intrusion detection systems (IDSs) as a solid line of defense against various attacks targeting the vulnerable nature of MANETs. Since cooperation between nodes is mandatory to detect complex attacks in real time, various solutions have been proposed to provide cooperative IDSs (CIDSs) in efforts to improve detection efficiency. However, all of these solutions suffer from high rates of false alarms, and they violate the constrained-bandwidth nature of MANETs. To overcome these two problems, this research presented a novel CIDS utilizing the concept of social communities and the Dempster-Shafer theory (DST) of evidence. The concept of social communities was intended to establish reliable cooperative detection reporting while consuming minimal bandwidth. On the other hand, DST targeted decreasing false accusations through honoring partial/lack of evidence obtained solely from reliable sources. Experimental evaluation of the proposed CIDS resulted in consistently high detection rates, low false alarms rates, and low bandwidth consumption. The results of this research demonstrated the viability of applying the social communities concept combined with DST in achieving high detection accuracy and minimized bandwidth consumption throughout the detection process
An intelligent context-aware threat detection and response model for smart cyber-physical systems
Smart cities, businesses, workplaces, and even residences have all been converged by the Internet of Things (IoT). The types and characteristics of these devices vary depending on the industry 4.0 and have rapidly increased recently, especially in smart homes. These gadgets can expose users to serious cyber dangers because of a variety of computing constraints and vulnerabilities in the security-by-design concept. The smart home network testbed setup presented in this study is used to evaluate and validate the protection of the smart cyber-physical system. The context-aware threat intelligence and response model identifies the states of the aligned smart devices to distinguish between real-world typical and attack scenarios. It then dynamically writes specific rules for protection against potential cyber threats. The context-aware model is trained on IoT Research and Innovation Lab - Smart Home System (IRIL-SHS) testbed dataset. The labeled dataset is utilized to create a random forest model, which is subsequently used to train and test the context-aware threat intelligence SHS model's effectiveness and performance. Finally, the model's logic is used to gain rules to be included in Suricata signatures and the firewall rulesets for the response system. Significant values of the measuring parameters were found in the results. The presented model can be used for the real-time security of smart home cyber-physical systems and develops a vision of security challenges for Industry 4.0
- …