Implementing Efficient and Multi-Hop Image Acquisition In Remote Monitoring IoT systems using LoRa Technology

Remote sensing or monitoring through the deployment of wireless sensor networks (WSNs) is considered an economical and convenient manner in which to collect information without cumbersome human intervention. Unfortunately, due to challenging deployment conditions, such as large geographic area, and lack of electricity and network infrastructure, designing such wireless sensor networks for large-scale farms or forests is difficult and expensive. Many WSN-appropriate wireless technologies, such as Wi-Fi, Bluetooth, Zigbee and 6LoWPAN, have been widely adopted in remote sensing. The performance of these technologies, however, is not sufficient for use across large areas. Generally, as the geographical scope expands, more devices need to be employed to expand network coverage, so the number and cost of devices in wireless sensor networks will increase dramatically. Besides, this type of deployment usually not only has a high probability of failure and high transmission costs, but also imposes additional overhead on system management and maintenance. LoRa is an emerging physical layer standard for long range wireless communication. By utilizing chirp spread spectrum modulation, LoRa features a long communication range and broad signal coverage. At the same time, LoRa also has low power consumption. Thus, LoRa outperforms similar technologies in terms of hardware cost, power consumption and radio coverage. It is also considered to be one of the promising solutions for the future of the Internet of Things (IoT). As the research and development of LoRa are still in its early stages, it lacks sufficient support for multi-packet transport and complex deployment topologies. Therefore, LoRa is not able to further expand its network coverage and efficiently support big data transfers like other conventional technologies. Besides, due to the smaller payload and data rate in LoRa physical design, it is more challenging to implement these features in LoRa. These shortcomings limit the potential for LoRa to be used in more productive application scenarios. This thesis addresses the problem of multi-packet and multi-hop transmission using LoRa by proposing two novel protocols, namely Multi-Packet LoRa (MPLR) and Multi-Hop LoRa (MHLR). LoRa's ability to transmit large messages is first evaluated in this thesis, and then the protocols are well designed and implemented to enrich LoRa's possibilities in image transmission applications and multi-hop topologies. MPLR introduces a reliable transport mechanism for multi-packet sensory data, making its network not limited to the transmission of small sensor data only. In collaboration with a data channel reservation technique, MPLR is able to greatly mitigate data collisions caused by the increased transmission time in laboratory experiments. MHLR realizes efficient routing in LoRa multi-hop transmission by utilizing the power of machine learning. The results of both indoor and outdoor experiments show that the machine learning based routing is effective in wireless sensor networks

Wireless sensor network as a distribute database

Wireless sensor networks (WSN) have played a role in various fields. In-network data processing is one of the most important and challenging techniques as it affects the key features of WSNs, which are energy consumption, nodes life circles and network performance. In the form of in-network processing, an intermediate node or aggregator will fuse or aggregate sensor data, which are collected from a group of sensors before transferring to the base station. The advantage of this approach is to minimize the amount of information transferred due to lack of computational resources. This thesis introduces the development of a hybrid in-network data processing for WSNs to fulfil the WSNs constraints. An architecture for in-network data processing were proposed in clustering level, data compression level and data mining level. The Neighbour-aware Multipath Cluster Aggregation (NMCA) is designed in the clustering level, which combines cluster-based and multipath approaches to process different packet loss rates. The data compression schemes and Optimal Dynamic Huffman (ODH) algorithm compressed data in the cluster head for the compressed level. A semantic data mining for fire detection was designed for extracting information from the raw data by the semantic data-mining model is developed to improve data accuracy and extract the fire event in the simulation. A demo in-door location system with in-network data processing approach is built to test the performance of the energy reduction of our designed strategy. In conclusion, the added benefits that the technical work can provide for in-network data processing is discussed and specific contributions and future work are highlighted

Adaptive Middleware for Resource-Constrained Mobile Ad Hoc and Wireless Sensor Networks

Mobile ad hoc networks: MANETs) and wireless sensor networks: WSNs) are two recently-developed technologies that uniquely function without fixed infrastructure support, and sense at scales, resolutions, and durations previously not possible. While both offer great potential in many applications, developing software for these types of networks is extremely difficult, preventing their wide-spread use. Three primary challenges are: 1) the high level of dynamics within the network in terms of changing wireless links and node hardware configurations,: 2) the wide variety of hardware present in these networks, and: 3) the extremely limited computational and energy resources available. Until now, the burden of handling these issues was put on the software application developer. This dissertation presents three novel programming models and middleware systems that address these challenges: Limone, Agilla, and Servilla. Limone reliably handles high levels of dynamics within MANETs. It does this through lightweight coordination primitives that make minimal assumptions about network connectivity. Agilla enables self-adaptive WSN applications via the integration of mobile agent and tuple space programming models, which is critical given the continuously changing network. It is the first system to successfully demonstrate the feasibility of using mobile agents and tuple spaces within WSNs. Servilla addresses the challenges that arise from WSN hardware heterogeneity using principles of Service-Oriented Computing: SOC). It is the first system to successfully implement the entire SOC model within WSNs and uniquely tailors it to the WSN domain by making it energy-aware and adaptive. The efficacies of the above three systems are demonstrated through implementation, micro-benchmarks, and the evaluation of several real-world applications including Universal Remote, Fire Detection and Tracking, Structural Health Monitoring, and Medical Patient Monitoring

Design And Implementation Of An Autonomous Wireless Sensor-Based Smart Home

The Smart home has gained widespread attentions due to its flexible integration into everyday life. This next generation of green home system transparently unifies various home appliances, smart sensors and wireless communication technologies. It can integrate diversified physical sensed information and control various consumer home devices, with the support of active sensor networks having both sensor and actuator components. Although smart homes are gaining popularity due to their energy saving and better living benefits, there is no standardized design for smart homes. In this thesis, a smart home design is put forward that can classify and predict the state of the home utilizing historical data of the home. A wireless sensor network was setup in a home to gather and send data to a sink node. The collected data was utilized to train and test a classification model achieving high accuracy with Support Vector Machine (SVM). SVM was further utilized as a predictor of future home states. Based on the data collection, classification and prediction models, a system was designed that can learn, run with minimal human supervision and detect anomalies in a home. The aforementioned attributes make the system an asset for senior care scenarios

Performance Evaluation of Cognitive Radio Spectrum Sensing Techniques through a Rayleigh Fading Channel

In recent years, there has been a steep rise in the demand for bandwidth due to a sharp increase in the number of devices connected to the wireless network. Coupled with the expected commercialization of 5G services and massive adoption of IoT, the upsurge in the number of devices connected to the wireless network will continue to grow exponentially into billions of devices. To accommodate the associated demand for wireless spectrum as we step into this new era of wireless connectivity, traditional methods of spectrum utilization based on fixed and static allocation are no longer adequate. New innovative forms that support dynamic assignment of spectrum space on as-per-need basis are now paramount. Cognitive radio has emerged as one of the most promising techniques that allow flexible usage of the scarce spectrum resource. Cognitive radio allows unlicensed users to opportunistically access spectrum bands assigned to primary users when these spectrum bands are idle. As such, cognitive radio reduces the gap between spectrum scarcity and spectrum underutilization. The most critical function of cognitive radio is spectrum sensing, which establishes the occupation status of a spectrum band, paving the way for a cognitive radio to initiate transmission if the band is idle. The most common and widely used methods for spectrum sensing are energy detection, matched filter detection, cyclostationary feature detection and cooperative based spectrum sensing. This dissertation investigates the performance of these spectrum-sensing techniques through a Rayleigh fading channel. In a wireless environment, a Rayleigh fading channel models the propagation of a wireless signal where there is no dominant line of sight between the transmitter and receiver. Understanding the performance of spectrum sensing techniques in a real world simulation environment is important for both industry and academia, as this allows for the optimal design of cognitive radio systems capable of efficiently executing their function. MATLAB software provides an experimental platform for the fusion of various Rayleigh fading channel parameters that mimic real world wireless channel characteristics. In this project, a MATLAB environment test bed is used to simulate the performance for each spectrum sensing technique across a range of signal-to-noise values, through a Rayleigh fading channel with a given set of parameters for channel delay, channel gain and Doppler shift. Simulation results are presented as plots for probability of detection versus signal-tonoise ratio, receiver operating characteristics (ROC) curves and complementary ROC curves. A detailed performance analysis for each spectrum sensing technique then follows, with comparisons done to determine the technique that offers the best relative performance

MOBILITY CONTROL IN WIRELESS SENSOR NETWORK

Wireless sensor networks (WSNs) have become one of the most important topics in wireless communication during the last decade. WSNs integrates many different technologies such as in hardware, software, data fusion, and applications. Hence, WSNs has received recently special research activities. WSNs have so many applications in different areas such as health-care systems, monitoring and control systems, rescue systems, and military applications. Since WSNs are usually deployed with large numbers of nodes in wide areas, they should be reliable, inexpensive, with very low power consumption, and with high redundancy to preserve the life-time of the whole network. In this M.Sc. thesis we consider one extremely important research topic in WSNs which is the mobility control. The mobility control is analyzed theoretically as well as with extensive simulations. In the simulation scenarios, static sensor nodes are first randomly deployed to the decided area. Then a reference trajectory for the mobile node is created based on the observed point phenomena, and the network guides the mobile node to move along the trajectory. A simulation platform called PiccSIM is used to simulate the scenarios. It is developed by the Communication and Control Engineering Groups at Helsinki University of Technology (TKK). The obtained results from these simulations are discussed and analyzed. This work opens the doors for more real applications in this area in the nearby future.fi=Opinnäytetyö kokotekstinä PDF-muodossa.|en=Thesis fulltext in PDF format.|sv=Lärdomsprov tillgängligt som fulltext i PDF-format