5 research outputs found

    O USO DO BIM EM SISTEMAS MEP E SOLARES: PANORAMA DA PRODUÇÃO CIENTÍFICA RECENTE

    Get PDF
    Os problemas relacionados à sustentabilidade na construção civil podem ser vistos inicialmente pela ausência de um maior aproveitamento das informações inerentes de cada disciplina do projeto em uma edificação, afetando desde a etapa de execução com alterações de cronograma, custos e até escopo. Os sistemas conhecidos por complementares - mecânicos, elétricos e hidrossanitários (MEP) - compõem parte importante da obra, sendo foco de atenção por profissionais e empresas do setor de arquitetura, engenharia e construção (AEC). Assim também, a avaliação dos resultados energéticos a partir das características de envoltória da edificação, em especial a energia solar fotovoltaica é alvo de grande apelo à indústria da construção para melhores índices ligados à sustentabilidade. É sob este contexto, que esta pesquisa objetiva analisar o panorama da produção científica sobre a utilização da modelagem da informação da construção (do inglês BIM) em sistemas solares fotovoltaicos e sistemas elétricos, nos bancos de dados Science Direct, IEEE, Scopus e Web of Science. A pesquisa é considerada de natureza descritiva, com abordagem qualitativa, ao realizar técnicas de estudo por revisão sistemática. Os resultados permitiram entender a produção científica sobre o tema, com destaque à ordenação do processo BIM, as possibilidades e barreiras encontradas e a pouca abrangência direta ao tema com destaque ao Green-BIM e coordenação MEP

    The use of BIM for the assessment of building performance: a systematic literature review

    Get PDF
    The use of Building Information Modeling (BIM) in the investigation of building performance was evaluated through a Systematic Literature Review (RSL). The aim was to establish a connection between BIM and the performance of buildings, their search and evaluation. Two electronic databases were used (Science Direct and Scopus), and journals and conferences articles written in english were included. The RSL resulted in the inclusion of 79 articles used in the construction of the BIM – performance panorama. Publications from 2006 to 2017 that discussed the use of BIM tools and models and the performance of buildings were found, and, according to the bibliometric analysis, the subject has been growing since 2014. Through the reading of the articles, it was noticed that there were four main approaches in which BIM tools were used in the analysis of performance characteristics of buildings: a group of publications used BIM tools in conjunction with performance simulations; other articles discussed the interoperability of BIM tools and simulation tools; a third group sought to integrate BIM with sensor data; and the last identified group discussed the integration of BIM tools with sustainable building classification systems. The four approaches were discussed which showed that the BIM is being used in the search for a better performance of the buildings and in the investigation of the real performance of the buildings. The first approach had more than half of the identified publications. It was not possible to identify a predominant simulation tool, either globally or by type of performance simulation. On the other hand, the most widely used BIM tool, regardless of publication proposal, was Autodesk Revit.O objetivo do presente estudo é estabelecer uma conexão entre o BIM e o desempenho das edificações, sua busca e sua avaliação, por meio de uma Revisão Sistemática da Literatura (RSL). Foram utilizadas duas bases de dados eletrônicas (Science Direct e Scopus), e foram incluídos artigos de periódicos e congressos escritos em inglês. A RSL resultou na inclusão de 79 artigos, publicados de 2006 a 2017, usados na construção do panorama BIM – desempenho. De acordo com a análise bibliométrica, o assunto em discussão vem crescendo desde 2014. Por meio da leitura dos artigos percebeu-se que existem quatro abordagens principais em que o BIM foi usado na análise de características do desempenho das edificações: um grupo de publicações utilizou as ferramentas BIM em conjunto com as ferramentas de simulações de desempenho; outros artigos discutiram sobre a interoperabilidade de ferramentas BIM e ferramentas de simulação; um terceiro grupo buscou integrar o BIM com dados de sensores; e o último grupo identificado discutiu a integração de ferramentas BIM com sistemas de classificação de construção sustentável. As quatro abordagens foram discutidas o que mostrou que o BIM está sendo usado na busca por um melhor desempenho das edificações e também na investigação do desempenho real das edificações. A primeira abordagem contou com mais da metade das publicações identificadas. Não foi possível identificar uma ferramenta de simulação predominante, seja globalmente seja por tipo de simulação de desempenho. Por outro lado, a ferramenta BIM mais utilizada, independentemente da proposta da publicação, foi a Autodesk Revit

    Integration of BIM in Building Sustainability Assessment methods

    Get PDF
    Tese de doutoramento em Sustentabilidade do Ambiente ConstruídoThe Architecture, Engineering and Construction (AEC) industry is highly responsible for several environmental impacts and worldwide authorities and societies are increasingly looking for more sustainable buildings. Given the ambitious targets of climate neutrality and decarbonisation, there is an urgent need to develop specific strategies to act in the building sector, as it has been recognised as a key industry to reverse environmental impacts. Among the existing tools, Building Sustainability Assessment (BSA) methods stand out as a pathway to evaluate and promote the integration of sustainability principles in buildings. However, such methods often require multi-disciplinary information about the building and significant resources such as time, money, and human labour. Consequently, and in the absence of mandatory legislation, BSA is usually neglected or applied in project later stages just to provide a sustainable evaluation of the building. With the deployment of Building Information Modelling (BIM), the opportunity for BSA to adopt and benefit from BIM functionalities arises. Currently, BIM has not been used comprehensively in the evaluation process of BSA but the potential for process automation and simplification are well known. To effectively integrate BSA into BIM environment, this research aims to develop a BIM integration framework for the Portuguese residential BSA method SBToolPT-H. Moreover, such framework will be materialized by the creation of an enduser BIM-based application – SBToolBIM – which will act as a decision support tool regarding building sustainability for the project's early stages. SBToolBIM will automate and accelerate the assessment of SBToolPTH by reflecting its criteria through computable rules. Results show the attractiveness of SBToolBIM, as well as the possibility to have real-time feedback about the building sustainability level in early project stages, allowing for the introduction and comparison of different sustainability measures with few resources. SBToolBIM has established a novel and common approach which can be used as a systematic framework to apply BIM in other BSA schemes, representing a pathway to reduce the building sector impacts and provide valuable contributes to reach worldwide climate neutrality and decarbonisation targets.A indústria da Arquitetura, Engenharia e Construção (AEC) é responsável por diversos impactes ambientais, levando as autoridades e sociedades mundiais à procura por edifícios mais sustentáveis. Perante os ambiciosos objetivos da neutralidade climática e descarbonização, surge a necessidade de desenvolver estratégias específicas para o setor dos edifícios, dado ser uma indústria chave para a reversão dos referidos impactes. Entre as ferramentas existentes, destacam-se os métodos da avaliação da sustentabilidade de edifícios (BSA, do inglês Building Sustainability Assessment) como forma de avaliar e promover a integração de medidas sustentáveis. No entanto, a sua utilização requer informações multidisciplinares do edifício, bem como recursos significativos, tais como tempo, custos e mão de obra. Consequentemente e na ausência de legislação obrigatória, os BSA são geralmente negligenciados ou aplicados em fases finais de projeto, apenas para identificar o nível de sustentabilidade do edifício. Com a implementação do Building Information Modeling (BIM), surge a oportunidade dos BSA adotarem e beneficiarem das suas funcionalidades. Atualmente, o BIM ainda não é integralmente utilizado no processo de avaliação dos BSA, mas as suas potencialidades para automação e simplificação do processo já foram reconhecidas. De modo a integrar os BSA em ambiente BIM, este trabalho visa desenvolver uma estrutura de integração BIM para o método BSA residencial português SBToolPT-H. A estrutura será materializada através da criação de uma aplicação BIM – SBToolBIM – que irá atuar como uma ferramenta de apoio à decisão em fases iniciais de projeto. O SBToolBIM irá automatizar e acelerar os processos de avaliação da sustentabilidade através do SBToolPT-H, refletindo os seus critérios através de regras computacionais. Os resultados demonstram a utilidade do SBToolBIM, bem como a possibilidade de fornecer feedback em tempo real sobre o nível de sustentabilidade do edifício nas fases iniciais de projeto, permitindo a introdução e a comparação de diferentes medidas de sustentabilidade, utilizando poucos recursos. O SBToolBIM estabelece uma nova abordagem sistemática para aplicação do BIM noutros métodos BSA, representando um caminho para a redução dos impactes do setor e dando valiosas contribuições para alcançar as metas de neutralidade climática e descarbonização.SBToolBIM research was funded by the Portuguese Foundation for Science and Technology (FCT), grant number SFRH/BD/145735/2019

    Knowledge Capturing in Design Briefing Process for Requirement Elicitation and Validation

    Get PDF
    Knowledge capturing and reusing are major processes of knowledge management that deal with the elicitation of valuable knowledge via some techniques and methods for use in actual and further studies, projects, services, or products. The construction industry, as well, adopts and uses some of these concepts to improve various construction processes and stages. From pre-design to building delivery knowledge management principles and briefing frameworks have been implemented across project stakeholders: client, design teams, construction teams, consultants, and facility management teams. At pre-design and design stages, understanding the client’s needs and users’ knowledge are crucial for identifying and articulating the expected requirements and objectives. Due to underperforming results and missed goals and objectives, many projects finish with highly dissatisfied clients and loss of contracts for some organizations. Knowledge capturing has beneficial effects via its principles and methods on requirement elicitation and validation at the briefing stage between user, client and designer. This paper presents the importance and usage of knowledge capturing and reusing in briefing process at pre-design and design stages especially the involvement of client and user, and explores the techniques and technologies that are usable in briefing process for requirement elicitation

    An Investigation on Benefit-Cost Analysis of Greenhouse Structures in Antalya

    Get PDF
    Significant population increase across the world, loss of cultivable land and increasing demand for food put pressure on agriculture. To meet the demand, greenhouses are built, which are, light structures with transparent cladding material in order to provide controlled microclimatic environment proper for plant production. Conceptually, greenhouses are similar with manufacturing buildings where a controlled environment for manufacturing and production have been provided and proper spaces for standardized production processes have been enabled. Parallel with the trends in the world, particularly in southern regions, greenhouse structures have been increasingly constructed and operated in Turkey. A significant number of greenhouses are located at Antalya. The satellite images demonstrated that for over last three decades, there has been a continuous invasion of greenhouses on all cultivable land. There are various researches and attempts for the improvement of greenhouse design and for increasing food production by decreasing required energy consumption. However, the majority of greenhouses in Turkey are very rudimentary structures where capital required for investment is low, but maintenance requirements are high when compared with new generation greenhouse structures. In this research paper, life-long capital requirements for construction and operation of greenhouse buildings in Antalya has been investigated by using benefit-cost analysis study
    corecore