Self-Healing Cellular Automata to Correct Soft Errors in Defective Embedded Program Memories

Static Random Access Memory (SRAM) cells in ultra-low power Integrated Circuits (ICs) based on nanoscale Complementary Metal Oxide Semiconductor (CMOS) devices are likely to be the most vulnerable to large-scale soft errors. Conventional error correction circuits may not be able to handle the distributed nature of such errors and are susceptible to soft errors themselves. In this thesis, a distributed error correction circuit called Self-Healing Cellular Automata (SHCA) that can repair itself is presented. A possible way to deploy a SHCA in a system of SRAM-based embedded program memories (ePM) for one type of chip multi-processors is also discussed. The SHCA is compared with conventional error correction approaches and its strengths and limitations are analyzed

Dependable Embedded Systems

This Open Access book introduces readers to many new techniques for enhancing and optimizing reliability in embedded systems, which have emerged particularly within the last five years. This book introduces the most prominent reliability concerns from today’s points of view and roughly recapitulates the progress in the community so far. Unlike other books that focus on a single abstraction level such circuit level or system level alone, the focus of this book is to deal with the different reliability challenges across different levels starting from the physical level all the way to the system level (cross-layer approaches). The book aims at demonstrating how new hardware/software co-design solution can be proposed to ef-fectively mitigate reliability degradation such as transistor aging, processor variation, temperature effects, soft errors, etc. Provides readers with latest insights into novel, cross-layer methods and models with respect to dependability of embedded systems; Describes cross-layer approaches that can leverage reliability through techniques that are pro-actively designed with respect to techniques at other layers; Explains run-time adaptation and concepts/means of self-organization, in order to achieve error resiliency in complex, future many core systems

Conception de systèmes embarqués fiables et auto-réglables : applications sur les systèmes de transport ferroviaire

During the last few decades, a tremendous progress in the performance of semiconductor devices has been accomplished. In this emerging era of high performance applications, machines need not only to be efficient but also need to be dependable at circuit and system levels. Several works have been proposed to increase embedded systems efficiency by reducing the gap between software flexibility and hardware high-performance. Due to their reconfigurable aspect, Field Programmable Gate Arrays (FPGAs) represented a relevant step towards bridging this performance/flexibility gap. Nevertheless, Dynamic Reconfiguration (DR) has been continuously suffering from a bottleneck corresponding to a long reconfiguration time.In this thesis, we propose a novel medium-grained high-speed dynamic reconfiguration technique for DSP48E1-based circuits. The idea is to take advantage of the DSP48E1 slices runtime reprogrammability coupled with a re-routable interconnection block to change the overall circuit functionality in one clock cycle. In addition to the embedded systems efficiency, this thesis deals with the reliability chanllenges in new sub-micron electronic systems. In fact, as new technologies rely on reduced transistor size and lower supply voltages to improve performance, electronic circuits are becoming remarkably sensitive and increasingly susceptible to transient errors. The system-level impact of these errors can be far-reaching and Single Event Transients (SETs) have become a serious threat to embedded systems reliability, especially for especially for safety critical applications such as transportation systems. The reliability enhancement techniques that are based on overestimated soft error rates (SERs) can lead to unnecessary resource overheads as well as high power consumption. Considering error masking phenomena is a fundamental element for an accurate estimation of SERs.This thesis proposes a new cross-layer model of circuits vulnerability based on a combined modeling of Transistor Level (TLM) and System Level Masking (SLM) mechanisms. We then use this model to build a self adaptive fault tolerant architecture that evaluates the circuit’s effective vulnerability at runtime. Accordingly, the reliability enhancement strategy is adapted to protect only vulnerable parts of the system leading to a reliable circuit with optimized overheads. Experimentations performed on a radar-based obstacle detection system for railway transportation show that the proposed approach allows relevant reliability/resource utilization tradeoffs.Un énorme progrès dans les performances des semiconducteurs a été accompli ces dernières années. Avec l’´émergence d’applications complexes, les systèmes embarqués doivent être à la fois performants et fiables. Une multitude de travaux ont été proposés pour améliorer l’efficacité des systèmes embarqués en réduisant le décalage entre la flexibilité des solutions logicielles et la haute performance des solutions matérielles. En vertu de leur nature reconfigurable, les FPGAs (Field Programmable Gate Arrays) représentent un pas considérable pour réduire ce décalage performance/flexibilité. Cependant, la reconfiguration dynamique a toujours souffert d’une limitation liée à la latence de reconfiguration.Dans cette thèse, une nouvelle technique de reconfiguration dynamiqueau niveau ”grain-moyen” pour les circuits à base de blocks DSP48E1 est proposée. L’idée est de profiter de la reprogrammabilité des blocks DSP48E1 couplée avec un circuit d’interconnection reconfigurable afin de changer la fonction implémentée par le circuit en un cycle horloge. D’autre part, comme les nouvelles technologies s’appuient sur la réduction des dimensions des transistors ainsi que les tensions d’alimentation, les circuits électroniques sont devenus de plus en plus susceptibles aux fautes transitoires. L’impact de ces erreurs au niveau système peut être catastrophique et les SETs (Single Event Transients) sont devenus une menace tangible à la fiabilité des systèmes embarqués, en l’occurrence pour les applications critiques comme les systèmes de transport. Les techniques de fiabilité qui se basent sur des taux d’erreurs (SERs) surestimés peuvent conduire à un gaspillage de ressources et par conséquent un cout en consommation de puissance électrique. Il est primordial de prendre en compte le phénomène de masquage d’erreur pour une estimation précise des SERs.Cette thèse propose une nouvelle modélisation inter-couches de la vulnérabilité des circuits qui combine les mécanismes de masquage au niveau transistor (TLM) et le masquage au niveau Système (SLM). Ce modèle est ensuite utilisé afin de construire une architecture adaptative tolérante aux fautes qui évalue la vulnérabilité effective du circuit en runtime. La stratégie d’amélioration de fiabilité est adaptée pour ne protéger que les parties vulnérables du système, ce qui engendre un circuit fiable avec un cout optimisé. Les expérimentations effectuées sur un système de détection d’obstacles à base de radar pour le transport ferroviaire montre que l’approche proposée permet d’´établir un compromis fiabilité/ressources utilisées

High-level services for networks-on-chip

Future technology trends envision that next-generation Multiprocessors Systems-on- Chip (MPSoCs) will be composed of a combination of a large number of processing and storage elements interconnected by complex communication architectures. Communication and interconnection between these basic blocks play a role of crucial importance when the number of these elements increases. Enabling reliable communication channels between cores becomes therefore a challenge for system designers. Networks-on-Chip (NoCs) appeared as a strategy for connecting and managing the communication between several design elements and IP blocks, as required in complex Systems-on-Chip (SoCs). The topic can be considered as a multidisciplinary synthesis of multiprocessing, parallel computing, networking, and on- chip communication domains. Networks-on-Chip, in addition to standard communication services, can be employed for providing support for the implementation of system-level services. This dissertation will demonstrate how high-level services can be added to an MPSoC platform by embedding appropriate hardware/software support in the network interfaces (NIs) of the NoC. In this dissertation, the implementation of innovative modules acting in parallel with protocol translation and data transmission in NIs is proposed and evaluated. The modules can support the execution of the high-level services in the NoC at a relatively low cost in terms of area and energy consumption. Three types of services will be addressed and discussed: security, monitoring, and fault tolerance. With respect to the security aspect, this dissertation will discuss the implementation of an innovative data protection mechanism for detecting and preventing illegal accesses to protected memory blocks and/or memory mapped peripherals. The second aspect will be addressed by proposing the implementation of a monitoring system based on programmable multipurpose monitoring probes aimed at detecting NoC internal events and run-time characteristics. As last topic, new architectural solutions for the design of fault tolerant network interfaces will be presented and discussed

Resolving the Memory Bottleneck for Single Supply Near-Threshold Computing

This paper focuses on a review of state-of-the-art memory designs and new design methods for near-threshold computing (NTC). In particular, it presents new ways to design reliable low-voltage NTC memories cost-effectively by reusing available cell libraries, or by adding a digital wrapper around existing commercially available memories. The approach is based on modeling at system level supported by silicon measurement on a test chip in a 40nm low-power processing technology. Advanced monitoring, control and run-time error mitigation schemes enable the operation of these memories at the same optimal near-Vt voltage level as the digital logic. Reliability degradation is thus overcome and this opens the way to solve the memory bottleneck in NTC systems. Starting from the available 40 nm silicon measurements, the analysis is extended to future 14 and 10 nm technology nodes

Aggressive undervolting of FPGAs : power & reliability trade-offs

In this work, we evaluate aggressive undervolting, i.e., voltage underscaling below the nominal level to reduce the energy consumption of Field Programmable Gate Arrays (FPGAs). Usually, voltage guardbands are added by chip vendors to ensure the worst-case process and environmental scenarios. Through experimenting on several FPGA architectures, we con¿rm a large voltage guardband for several FPGA components, which in turn, delivers signi¿cant power savings. However, further undervolting below the voltage guardband may cause reliability issues as the result of the circuit delay increase, and faults might start to appear. We extensively characterize the behavior of these faults in terms of the rate, location, type, as well as sensitivity to environmental temperature, primarily focusing on FPGA on-chip memories, or Block RAMs (BRAMs). Understanding this behavior can allow to deploy ef¿cient mitigation techniques, and in turn, FPGA-based designs can be improved for better energy, reliability, and performance trade-offs. Finally, as a case study, we evaluate a typical FPGA-based Neural Network (NN) accelerator when the FPGA voltage is underscaled. In consequence, the substantial NN energy savings come with the cost of NN accuracy loss. To attain power savings without NN accuracy loss below the voltage guardband gap, we proposed an application-aware technique and we also, evaluated the built-in Error-Correcting Code (ECC) mechanism. Hence, First, we developed an application-dependent BRAMs placement technique that relies on the deterministic behavior of undervolting faults, and mitigates these faults by mapping the most reliability sensitive NN parameters to BRAM blocks that are relatively more resistant to undervolting faults. Second, as a more general technique, we applied the built-in ECC of BRAMs and observed a signi¿cant fault coverage capability thanks to the behavior of undervolting faults, with a negligible power consumption overhead.En este trabajo, evaluamos el reducir el voltaje en forma agresiva, es decir, bajar la tensión por debajo del nivel nominal para reducir el consumo de energía en Field Programmable Gate Arrays (FPGA). Por lo general, los vendedores de chips establecen margen de seguridad al voltaje para garantizar el funcionamiento de los mismos en el peor de los casos y en los peores escenarios ambientales. Mediante la experimentación en varias arquitecturas FPGA, confirmamos que hay un margen de seguridad de voltaje grande en varios de los componentes de la FPGA, que a su vez, nos ofrece ahorros de energía significativos. Sin embargo, un trabajar a un voltaje por debajo del margen de seguridad del voltaje puede causar problemas de confiabilidad a medida ya que aumenta el retardo del circuito y pueden comenzar a aparecer fallos. Caracterizamos ampliamente el comportamiento de estos fallos en términos de velocidad, ubicación, tipo, así como la sensibilidad a la temperatura ambiental, centrándonos principalmente en memorias internas de la FPGA, o Block RAM (BRAM). Comprender este comportamiento puede permitir el desarrollo de técnicas eficientes de mitigación y, a su vez, mejorar los diseños basados en FPGA para obtener ahorros en energía, una mayor confiabilidad y un mayor rendimiento. Finalmente, como caso de estudio, evaluamos un acelerador típico de Redes Neuronales basado en FPGA cuando el voltaje de la FPGA esta por debajo del nivel mínimo de seguridad. En consecuencia, los considerables ahorros de energía de la red neuronal vienen asociados con la pérdida de precisión de la red neuronal. Para obtener ahorros de energía sin una pérdida de precisión en la red neuronal por debajo del margen de seguridad del voltaje, proponemos una técnica que tiene en cuenta la aplicación, asi mismo, evaluamos el mecanismo integrado en las BRAMs de Error Correction Code (ECC). Por lo tanto, en primer lugar, desarrollamos una técnica de colocación de BRAM dependiente de la aplicación que se basa en el comportamiento determinista de las fallos cuando la FPGA funciona por debajo del margen de seguridad, y se mitigan estos fallos asignando los parámetros de la red neuronal más sensibles a producir fallos a los bloques BRAM que son relativamente más resistentes a los fallos. En segundo lugar, como técnica más general, aplicamos el ECC incorporado de los BRAM y observamos una capacidad de cobertura de fallos significativo gracias a las características de comportamiento de fallos, con una sobrecoste de consumo de energía insignificantePostprint (published version

Circuits and Systems Advances in Near Threshold Computing

Modern society is witnessing a sea change in ubiquitous computing, in which people have embraced computing systems as an indispensable part of day-to-day existence. Computation, storage, and communication abilities of smartphones, for example, have undergone monumental changes over the past decade. However, global emphasis on creating and sustaining green environments is leading to a rapid and ongoing proliferation of edge computing systems and applications. As a broad spectrum of healthcare, home, and transport applications shift to the edge of the network, near-threshold computing (NTC) is emerging as one of the promising low-power computing platforms. An NTC device sets its supply voltage close to its threshold voltage, dramatically reducing the energy consumption. Despite showing substantial promise in terms of energy efficiency, NTC is yet to see widescale commercial adoption. This is because circuits and systems operating with NTC suffer from several problems, including increased sensitivity to process variation, reliability problems, performance degradation, and security vulnerabilities, to name a few. To realize its potential, we need designs, techniques, and solutions to overcome these challenges associated with NTC circuits and systems. The readers of this book will be able to familiarize themselves with recent advances in electronics systems, focusing on near-threshold computing

Improving the Reliability of Microprocessors under BTI and TDDB Degradations

Reliability is a fundamental challenge for current and future microprocessors with advanced nanoscale technologies. With smaller gates, thinner dielectric and higher temperature microprocessors are vulnerable under aging mechanisms such as Bias Temperature Instability (BTI) and Temperature Dependent Dielectric Breakdown (TDDB). Under continuous stress both parametric and functional errors occur, resulting compromised microprocessor lifetime. In this thesis, based on the thorough study on BTI and TDDB mechanisms, solutions are proposed to mitigating the aging processes on memory based and random logic structures in modern out-of-order microprocessors. A large area of processor core is occupied by memory based structure that is vulnerable to BTI induced errors. The problem is exacerbated when PBTI degradation in NMOS is as severe as NBTI in PMOS in high-k metal gate technology. Hence a novel design is proposed to recover 4 internal gates within a SRAM cell simultaneously to mitigate both NBTI and PBTI effects. This technique is applied to both the L2 cache banks and the busy function units with storage cells in out-of-order pipeline in two different ways. For the L2 cache banks, redundant cache bank is added exclusively for proactive recovery rotation. For the critical and busy function units in out-of-order pipelines, idle cycles are exploited at per-buffer-entry level. Different from memory based structures, combinational logic structures such as function units in execution stage can not use low overhead redundancy to tolerate errors due to their irregular structure. A design framework that aims to improve the reliability of the vulnerable functional units of a processor core is designed and implemented. The approach is designing a generic function unit (GFU) that can be reconfigured to replace a particular functional unit (FU) while it is being recovered for improved lifetime. Although flexible, the GFU is slower than the original target FUs. So GFU is carefully designed so as to minimize the performance loss when it is in-use. More schemes are also designed to avoid using the GFU on performance critical paths of a program execution