Congestion aware multipath routing: performance improvements in core networks

In this paper the improved Congestion Aware Multipath Routing algorithm is analysed in terms of Core network throughput and longer paths contribution. The algorithm discovers unused network resources and dynamically adapts to the actual traffic load and available resources displacement. Several simulation scenarios have been benchmarked in order to verify algorithm in typical Internet Service Provider cases. Simulation scenarios in this paper are focused on verifying functionality in dense core networks. For this purpose, tests were performed on TeraStream based network – the Deutsche Telekom Group design concept. Simulation results have proven better performance and resource utilization of the proposed algorithm than traditional Bellman-Ford based algorithms and equal cost multipath approaches

Multipath inter-domain policy routing

Dissertação submetida para a obtenção do grau de Doutor em Engenharia Electrotécnica e de ComputadoresRouting can be abstracted to be a path nding problem in a graph that models the network. The problem can be modelled using an algebraic approach that describes the way routes are calculated and ranked. The shortest path problem is the most common form and consists in nding the path with the smallest cost. The inter-domain scenario introduces some new challenges to the routing problem: the routing is performed between independently con gured and managed networks; the ranking of the paths is not based on measurable metrics but on policies; and the forwarding is destination based hop-by-hop. In this thesis we departed from the Border gateway Protocol (BGP) identifying its main problems and elaborating on some ideal characteristics for a routing protocol suited for the inter-domain reality. The main areas and contributions of this work are the following: The current state of the art in algebraic modeling of routing problems is used to provide a list of possible alternative conditions for the correct operation of such protocols. For each condition the consequences in terms of optimality and network restrictions are presented. A routing architecture for the inter-domain scenario is presented. It is proven that it achieves a multipath routing solution in nite time without causing forwarding loops. We discuss its advantages and weaknesses. A tra c-engineering scheme is designed to take advantage of the proposed architecture. It works using only local information and cooperation of remote ASes to minimize congestion in the network with minimal signalling. Finally a general model of a routing protocol based on hierarchical policies is used to study how e cient is the protocol operation when the correctness conditions are met. This results in some conclusions on how the policies should be chosen and applied in order to achieve speci c goals.Portuguese Science and Technology Foundation -(FCT/MCTES)grant SFRH/BD/44476/2008; CTS multi-annual funding project PEst OE/EEI/UI0066/2011; MPSat project PTDC/EEA TEL/099074/2008; OPPORTUNISTICCR project PTDC/EEA-TEL/115981/2009; Fentocells project PTDC/EEA TEL/120666/201

Equal cost multipath routing in IP networks

IP verkkojen palveluntarjoajat ja loppukäyttäjät vaativat yhä tehokkaampia ja parempilaatuisia palveluita, mikä vaatii tuotekehittäjiä tarjoamaan hienostuneempia liikennesuunnittelumenetelmiä verkon optimointia ja hallintaa varten. IS-IS ja OSPF ovat standardiratkaisut hoitamaan reititystä pienissä ja keskisuurissa pakettiverkoissa. Monipolkureititys on melko helppo ja yleispätevä tapa parantaa kuorman balansointia ja nopeaa suojausta tällaisissa yhden polun reititykseen keskittyvissä verkoissa. Tämä diplomityö kirjoitettiin aikana, jolloin monipolkureititys toteutettiin Tellabs-nimisen yrityksen 8600-sarjan reitittimiin. Tärkeimpiä kohtia monipolkureitityksen käyttöönotossa ovat lyhyimmän polun algoritmin muokkaukseen ja reititystaulun toimintaan liittyvät muutokset ohjaustasolla sekä kuormanbalansointialgoritmin toteutus reitittimen edelleenkuljetustasolla. Diplomityön tulokset sekä olemassa oleva kirjallisuus osoittavat, että kuormanbalansointialgoritmilla on suurin vaikutus yhtä hyvien polkujen liikenteen jakautumiseen ja että oikean algoritmin valinta on ratkaisevan tärkeää. Hajakoodaukseen perustuvat algoritmit, jotka pitävät suurimman osan liikennevuoista samalla polulla, ovat dominoivia ratkaisuja nykyisin. Tämän algoritmityypin etuna on helppo toteutettavuus ja kohtuullisen hyvä suorituskyky. Liikenne on jakautunut tasaisesti, kunhan liikennevuoiden lukumäärä on riittävän suuri. Monipolkureititys tarjoaa yksinkertaisen ratkaisun, jota on helppo konfiguroida ja ylläpitää. Suorituskyky on parempi kuin yksipolkureititykseen perustuvat ratkaisut ja se haastaa monimutkaisemmat MPLS ratkaisut. Ainoa huolehdittava asia on linkkien painojen asettaminen sillä tavalla, että riittävästi kuormantasauspolkuja syntyy.Increasing efficiency and quality demands of services from IP network service providers and end users drive developers to offer more and more sophisticated traffic engineering methods for network optimization and control. Intermediate System to Intermediate System and Open Shortest Path First are the standard routing solutions for intra-domain networks. An easy upgrade utilizes Equal Cost Multipath (ECMP) that is one of the most general solutions for IP traffic engineering to increase load balancing and fast protection performance of single path interior gateway protocols. This thesis was written during the implementation process of the ECMP feature of Tellabs 8600 series routers. The most important parts in adoption of ECMP are changes to shortest path first algorithm and routing table modification in the control plane and implementation of load balancing algorithm to the forwarding plane of router. The results of the thesis and existing literature prove, that the load balancing algorithm has the largest affect on traffic distribution of equal cost paths and the selection of the correct algorithm is crucial. Hash-based algorithms, that keep the traffic flows in the same path, are the dominating solutions currently. They provide simple implementation and moderate performance. Traffic is distributed evenly, when the number of flows is large enough. ECMP provides a simple solution that is easy to configure and maintain. It outperforms single path solutions and competes with more complex MPLS solutions. The only thing to take care of is the adjustment of link weights of the network in order to create enough load balancing paths

Source-specific routing

Source-specific routing (not to be confused with source routing) is a routing technique where routing decisions depend on both the source and the destination address of a packet. Source-specific routing solves some difficult problems related to multihoming, notably in edge networks, and is therefore a useful addition to the multihoming toolbox. In this paper, we describe the semantics of source-specific packet forwarding, and describe the design and implementation of a source-specific extension to the Babel routing protocol as well as its implementation - to our knowledge, the first complete implementation of a source-specific dynamic routing protocol, including a disambiguation algorithm that makes our implementation work over widely available networking APIs. We further discuss interoperability between ordinary next-hop and source-specific dynamic routing protocols. Our implementation has seen a moderate amount of deployment, notably as a testbed for the IETF Homenet working group

Segment Routing: a Comprehensive Survey of Research Activities, Standardization Efforts and Implementation Results

Fixed and mobile telecom operators, enterprise network operators and cloud providers strive to face the challenging demands coming from the evolution of IP networks (e.g. huge bandwidth requirements, integration of billions of devices and millions of services in the cloud). Proposed in the early 2010s, Segment Routing (SR) architecture helps face these challenging demands, and it is currently being adopted and deployed. SR architecture is based on the concept of source routing and has interesting scalability properties, as it dramatically reduces the amount of state information to be configured in the core nodes to support complex services. SR architecture was first implemented with the MPLS dataplane and then, quite recently, with the IPv6 dataplane (SRv6). IPv6 SR architecture (SRv6) has been extended from the simple steering of packets across nodes to a general network programming approach, making it very suitable for use cases such as Service Function Chaining and Network Function Virtualization. In this paper we present a tutorial and a comprehensive survey on SR technology, analyzing standardization efforts, patents, research activities and implementation results. We start with an introduction on the motivations for Segment Routing and an overview of its evolution and standardization. Then, we provide a tutorial on Segment Routing technology, with a focus on the novel SRv6 solution. We discuss the standardization efforts and the patents providing details on the most important documents and mentioning other ongoing activities. We then thoroughly analyze research activities according to a taxonomy. We have identified 8 main categories during our analysis of the current state of play: Monitoring, Traffic Engineering, Failure Recovery, Centrally Controlled Architectures, Path Encoding, Network Programming, Performance Evaluation and Miscellaneous...Comment: SUBMITTED TO IEEE COMMUNICATIONS SURVEYS & TUTORIAL

A Survey on the Contributions of Software-Defined Networking to Traffic Engineering

Since the appearance of OpenFlow back in 2008, software-defined networking (SDN) has gained momentum. Although there are some discrepancies between the standards developing organizations working with SDN about what SDN is and how it is defined, they all outline traffic engineering (TE) as a key application. One of the most common objectives of TE is the congestion minimization, where techniques such as traffic splitting among multiple paths or advanced reservation systems are used. In such a scenario, this manuscript surveys the role of a comprehensive list of SDN protocols in TE solutions, in order to assess how these protocols can benefit TE. The SDN protocols have been categorized using the SDN architecture proposed by the open networking foundation, which differentiates among data-controller plane interfaces, application-controller plane interfaces, and management interfaces, in order to state how the interface type in which they operate influences TE. In addition, the impact of the SDN protocols on TE has been evaluated by comparing them with the path computation element (PCE)-based architecture. The PCE-based architecture has been selected to measure the impact of SDN on TE because it is the most novel TE architecture until the date, and because it already defines a set of metrics to measure the performance of TE solutions. We conclude that using the three types of interfaces simultaneously will result in more powerful and enhanced TE solutions, since they benefit TE in complementary ways.European Commission through the Horizon 2020 Research and Innovation Programme (GN4) under Grant 691567 Spanish Ministry of Economy and Competitiveness under the Secure Deployment of Services Over SDN and NFV-based Networks Project S&NSEC under Grant TEC2013-47960-C4-3-

A Survey of PCN-Based Admission Control and Flow Termination

Pre-congestion notification (PCN) provides feedback\ud about load conditions in a network to its boundary nodes. The PCN working group of the IETF discusses the use of PCN to implement admission control (AC) and flow termination (FT) for prioritized realtime traffic in a DiffServ domain. Admission control (AC) is a well-known flow control function that blocks admission requests of new flows when they need to be carried over a link whose admitted PCN rate already exceeds an admissible rate. Flow termination (FT) is a new flow control function that terminates some already admitted flows when they are carried over a link whose admitted PCN rate exceeds a supportable rate. The latter condition can occur in spite of AC, e.g., when traffic is rerouted due to network failures.\ud This survey gives an introduction to PCN and is a primer for\ud this new technology. It presents and discusses the multitude of architectural design options in an early stage of the standardization process in a comprehensive and streamlined way before only a subset of them is standardized by the IETF. It brings PCN from the IETF to the research community and serves as historical record

BGP-XM: BGP eXtended Multipath for Transit Autonomous Systems

Multipath interdomain routing has been proposed to enable flexible traffic engineering for transit Autonomos Systems (ASes). Yet, there is a lack of solutions providing maximal path diversity and backwards compatibility at the same time. The BGP-XM (Border Gateway Protocol-eXtended Multipath) extension presented in this paper is a complete and flexible approach to solve many of the limitations of previous BGP multipath solutions. ASes can benefit from multipath capabilities starting with a single upgraded router, and without any coordination with other ASes. BGP-XM defines an algorithm to merge into regular BGP updates information from paths which may even traverse different ASes. This algorithm can be combined with different multipath selection algorithms, such as the K-BESTRO (K-Best Route Optimizer) tunable selection algorithm proposed in this paper. A stability analysis and stable policy guidelines are provided. The performance evaluation of BGP-XM, running over an Internet-like topology, shows that high path diversity can be achieved even for limited deployments of the multipath mechanism. Further results for large-scale deployments reveal that the extension is suitable for large deployment since it shows a low impact in the AS path length and in the routing table size