Master of Science

thesisThe focus of this thesis is the impact and use of crosstalk and coupling when testing for electrical wiring faults using reflectometry. This thesis describes a method for detecting and locating faults on cable shields using an adapted reflectometry system. A signal transmitted on the inner conductor is coupled to the outside through the fault, a small aperture in the cable shielding. This very small signal is then detected and correlated with the original signal transmitted on the inner conductor. The signals that leak out of the aperture, the damaged shield, and propagate down the outside of the cable are quantified as a function of the aperture size and frequency. A ferrite loaded toroidal sensor design is also proposed for receiving this external signal in order to both detect and localize the shield damage. Both simulations and measurements validate the effectiveness of this method. Unshielded discrete wires are another common type of transmission line. While unshielded wires are primarily used for DC power, they are still subject to degradation over time and require maintenance. Unlike shielded cables, there is a significant amount of coupling that occurs between adjacent wires during a reflectometry test. This coupling is quantified and evaluated for two applications. The first is simultaneous testing of multiple adjacent wires in a bundle. In this case, minimizing the coupling is desirable in order to reduce noise in the reflectometry signature. The second is the exploration of the potential for a single reflectometry test to locate faults on adjacent wires without directly testing them. When a single test is performed in a multiwire bundle, the reflectometry signature will be a superposition of reflections from all nearby conductors. This thesis addresses the testing of a multiconductor wiring structure with a common signal reference as well as a similar structure with an isolated signal reference. In order to accurately detect faults on multiconductor wiring structures, both testing methods must be considered. A fault between a conductor and its reference conductor is easily detectable. A cross fault between two nonreference conductors is not. For cross fault consideration, the only method for detection is using a common signal reference and analyzing the data on adjacent lines

Audio Selftest For Automated Fault Detection In Meeting Room Hardware

Meeting rooms are important for team collaboration and tend to have a high occupancy rate. It is important to detect and repair malfunction of meeting room hardware that is used to conduct video conferences. This disclosure describes audio selftest techniques that can automatically detect faults and enable preemptively fixing the detected faults to ensure that each meeting room meets a minimum set of quality standards. The audio selftest includes playing back sounds through in-room speakers and detecting the sounds via in-room microphones. Common problems such as disconnected or broken speakers/ microphones, swapped microphones or microphone arrays, miswired microphones, etc. can be diagnosed. Further, interference in the room can be detected and rooms can be classified as suitable or unsuitable for meetings based on ambient noise detected in a silent room by classifying the detected signal. Such automated diagnosis can enable frequent testing of meeting room hardware, provide early detection of malfunctioning equipment, and enable faster repair

DETC2011-48912 A JOINT-CODING SCHEME WITH CROSSTALK AVOIDANCE

ABSTRACT The reliable transfer in Network on Chip can be guaranteed by crosstalk avoidance and error detection code. In this paper, we propose a joint coding scheme combined with crosstalk avoidance coding with error control coding. The Fibonacci numeral system is applied to satisfy the requirement of crosstalk avoidance coding, and the error detection is achieved by adding parity bits. We also implement the codec in register transfer level. Furthermore, the schemes of codec applying to fault-tolerant router are analyzed. The experimental result shows that "once encode, multiple decode" scheme outperforms other schemes in trade-off of delay, area and power

DIGITAL ANALYSIS OF PULSE CODE MODULATED SIGNALS IN TELECOMMUNICATIONS CHANNELS

In this dissertation the techniques required to test pulse code modulated telecommunications channels are developed using the fast Fourier transform. The techniques are then applied through the design and assembly of the corresponding hardware. Windowing of data to improve spectral estimation is discussed as well as the conditions where special test signals may be synthesized to preclude the need for windowing. Conjugate-periodic functions encountered in prime radix transforms are defined and their fast transform techniques are developed

The dynamics of a long flexible horizontal circular cylinder in water waves.

SIGLEAvailable from British Library Document Supply Centre- DSC:D86427 / BLDSC - British Library Document Supply CentreGBUnited Kingdo

Architecting a One-to-many Traffic-Aware and Secure Millimeter-Wave Wireless Network-in-Package Interconnect for Multichip Systems

With the aggressive scaling of device geometries, the yield of complex Multi Core Single Chip(MCSC) systems with many cores will decrease due to the higher probability of manufacturing defects especially, in dies with a large area. Disintegration of large System-on-Chips(SoCs) into smaller chips called chiplets has shown to improve the yield and cost of complex systems. Therefore, platform-based computing modules such as embedded systems and micro-servers have already adopted Multi Core Multi Chip (MCMC) architectures overMCSC architectures. Due to the scaling of memory intensive parallel applications in such systems, data is more likely to be shared among various cores residing in different chips resulting in a significant increase in chip-to-chip traffic, especially one-to-many traffic. This one-to-many traffic is originated mainly to maintain cache-coherence between many cores residing in multiple chips. Besides, one-to-many traffics are also exploited by many parallel programming models, system-level synchronization mechanisms, and control signals. How-ever, state-of-the-art Network-on-Chip (NoC)-based wired interconnection architectures do not provide enough support as they handle such one-to-many traffic as multiple unicast trafficusing a multi-hop MCMC communication fabric. As a result, even a small portion of such one-to-many traffic can significantly reduce system performance as traditional NoC-basedinterconnect cannot mask the high latency and energy consumption caused by chip-to-chipwired I/Os. Moreover, with the increase in memory intensive applications and scaling of MCMC systems, traditional NoC-based wired interconnects fail to provide a scalable inter-connection solution required to support the increased cache-coherence and synchronization generated one-to-many traffic in future MCMC-based High-Performance Computing (HPC) nodes. Therefore, these computation and memory intensive MCMC systems need an energy-efficient, low latency, and scalable one-to-many (broadcast/multicast) traffic-aware interconnection infrastructure to ensure high-performance. Research in recent years has shown that Wireless Network-in-Package (WiNiP) architectures with CMOS compatible Millimeter-Wave (mm-wave) transceivers can provide a scalable, low latency, and energy-efficient interconnect solution for on and off-chip communication. In this dissertation, a one-to-many traffic-aware WiNiP interconnection architecture with a starvation-free hybrid Medium Access Control (MAC), an asymmetric topology, and a novel flow control has been proposed. The different components of the proposed architecture are individually one-to-many traffic-aware and as a system, they collaborate with each other to provide required support for one-to-many traffic communication in a MCMC environment. It has been shown that such interconnection architecture can reduce energy consumption and average packet latency by 46.96% and 47.08% respectively for MCMC systems. Despite providing performance enhancements, wireless channel, being an unguided medium, is vulnerable to various security attacks such as jamming induced Denial-of-Service (DoS), eavesdropping, and spoofing. Further, to minimize the time-to-market and design costs, modern SoCs often use Third Party IPs (3PIPs) from untrusted organizations. An adversary either at the foundry or at the 3PIP design house can introduce a malicious circuitry, to jeopardize an SoC. Such malicious circuitry is known as a Hardware Trojan (HT). An HTplanted in the WiNiP from a vulnerable design or manufacturing process can compromise a Wireless Interface (WI) to enable illegitimate transmission through the infected WI resulting in a potential DoS attack for other WIs in the MCMC system. Moreover, HTs can be used for various other malicious purposes, including battery exhaustion, functionality subversion, and information leakage. This information when leaked to a malicious external attackercan reveals important information regarding the application suites running on the system, thereby compromising the user profile. To address persistent jamming-based DoS attack in WiNiP, in this dissertation, a secure WiNiP interconnection architecture for MCMC systems has been proposed that re-uses the one-to-many traffic-aware MAC and existing Design for Testability (DFT) hardware along with Machine Learning (ML) approach. Furthermore, a novel Simulated Annealing (SA)-based routing obfuscation mechanism was also proposed toprotect against an HT-assisted novel traffic analysis attack. Simulation results show that,the ML classifiers can achieve an accuracy of 99.87% for DoS attack detection while SA-basedrouting obfuscation could reduce application detection accuracy to only 15% for HT-assistedtraffic analysis attack and hence, secure the WiNiP fabric from age-old and emerging attacks

34th Midwest Symposium on Circuits and Systems-Final Program

Organized by the Naval Postgraduate School Monterey California. Cosponsored by the IEEE Circuits and Systems Society. Symposium Organizing Committee: General Chairman-Sherif Michael, Technical Program-Roberto Cristi, Publications-Michael Soderstrand, Special Sessions- Charles W. Therrien, Publicity: Jeffrey Burl, Finance: Ralph Hippenstiel, and Local Arrangements: Barbara Cristi

Prognostic Approaches Using Transient Monitoring Methods

The utilization of steady state monitoring techniques has become an established means of providing diagnostic and prognostic information regarding both systems and equipment. However, steady state data is not the only, or in some cases, even the best source of information regarding the health and state of a system. Transient data has largely been overlooked as a source of system information due to the additional complexity in analyzing these types of signals. The development for algorithms and techniques to quickly, and intuitively develop generic quantification of deviations a transient signal towards the goal of prognostic predictions has until now, largely been overlooked. By quantifying and trending these shifts, an accurate measure of system heath can be established and utilized by prognostic algorithms. In fact, for some systems the elevated stress levels during transients can provide better, more clear indications of system health than those derived from steady state monitoring. This research is based on the hypothesis that equipment health signals for some failure modes are stronger during transient conditions than during steady-state because transient conditions (e.g. start-up) place greater stress on the equipment for these failure modes. From this it follows that these signals related to the system or equipment health would display more prominent indications of abnormality if one were to know the proper means to identify them. This project seeks to develop methods and conceptual models to monitor transient signals for equipment health. The purpose of this research is to assess if monitoring of transient signals could provide alternate or better indicators of incipient equipment failure prior to steady state signals. The project is focused on identifying methods, both traditional and novel, suitable to implement and test transient model monitoring in both an useful and intuitive way. By means of these techniques, it is shown that the addition information gathered during transient portions of life can be used to either to augment existing steady-state information, or in cases where such information is unavailable, be used as a primary means of developing prognostic models

Modern Approaches to Topological Quantum Error Correction

The construction of a large-scale fault-tolerant quantum computer is an outstanding scientific and technological goal. It holds the promise to allow us to solve a variety of complex problems such as factoring large numbers, quick database search, and the quantum simulation of many-body quantum systems in fields as diverse as condensed matter, quantum chemistry, and even high-energy physics. Sophisticated theoretical protocols for reliable quantum information processing under imperfect conditions have been de-veloped, when errors affect and corrupt the fragile quantum states during storage and computations. Arguably, the most realistic and promising ap-proach towards practical fault-tolerant quantum computation are topologi-cal quantum error-correcting codes, where quantum information is stored in interacting, topologically ordered 2D or 3D many-body quantum systems. This approach offers the highest known error thresholds, which are already today within reach of the experimental accuracy in state-of-the-art setups. A combination of theoretical and experimental research is needed to store, protect and process fragile quantum information in logical qubits effectively so that they can outperform their constituting physical qubits. Whereas small-scale quantum error correction codes have been implemented, one of the main theoretical challenges remains to develop new and improve existing efficient strategies (so-called decoders) to derive (near-)optimal error cor-rection operations in the presence of experimentally accessible measurement information and realistic noise sources. One main focus of this project is the development and numerical implementation of scalable, efficient decoders to operate topological color codes. Additionally, we study the feasibility of im-plementing quantum error-correcting codes fault-tolerantly in near-term ion traps. To this end, we use realistic modeling of the different noise sources, computer simulations, and most modern quantum information approaches to quantum circuitry and noise suppression techniques