Spatial and Temporal Distribution of Groundwater Recharge in the West Bank Using Remote Sensing and GIS Techniques

Estimating groundwater recharge to aquifer systems is a very important element in assessing the water resources of the West Bank. Of particular interest is the sustainable yield of the aquifers. Previous studies have developed analytical recharge models that are based on the long-term annual rainfall data. These models have been shown to be inadequate and changes over shorter periods, e.g. monthly estimates, must be known in order to study the temporal distribution of recharge. The approach used in this research integrates data derived from satellite images (e.g. land cover, evapotranspiration, rainfall, and digital elevation model) with hydrogeological data in a Geographic Information System (GIS) model to identify and map the surface recharge areas. The Surface Energy Balance Algorithm for Land (SEBAL) is applied to time series of remote sensing MODerate Resolution Imaging Spectroradiometer (MODIS) level 3 data of reflectance and surface temperature measurements to estimate monthly evapotranspiration; precipitation is derived from the monthly data sets of the Tropical Rainfall Measuring Mission (TRMM); runoff is given assumed values of 0.75 mm month-1 and 0.4 mm month-1 for the months of January and February, respectively. Recharge is quantified from November until March by applying the water balance method where evapotranspiration estimates and runoff are subtracted from precipitation. Results show good agreement between data reported in the literature and remote sensing-based analysis. Empirical models that are based on long term rainfall measurements suggest recharge values between 800 and 836 MCM yr-1 while the remote sensing based model results estimate recharge to be 700 MCM yr-1. The Western, North-Eastern, and Eastern Aquifer Basins receive 30%, 23%, and 47% of the total calculated recharge while percentages available in the literature provide 49%, 22%, and 29%, respectively. Discrepancies are mainly due to lack of field data, the overestimation of actual evapotranspiration, and underestimation of TRMM precipitation values. The recharge map indicates that the most effective groundwater recharge zones are located in the north and west of the area that is characterised by thick and well developed soil deposits, heavy vegetation, and a sub-humid climate with the potential of significant recharge occurring during the wet season. Some areas in the east include concentration of drainage and stream flows which increase the ability of to recharge the groundwater system. The least effective areas are in the south and south-west region that is more arid with much less recharge, mainly due to its isolated thin soil deposits. A sensitivity analysis was carried out to demonstrate the impact of land cover change on groundwater and natural recharge. The assessment involved the use of land covers of 1994 and 2004 with the same fixed parameters of evapotranspiration, precipitation, drainage, slope, soil, and geology. Results show a decrease in high and intermediate high recharge areas from 40.25 km2 and 2462.25 km2 in year 1994 to 15.5 km2 and 1994 km2 in 2004, respectively. This illustrates the extent of land cover/land use change influence on recharge and calls for integrated plans and strategies to preserve recharge at least at its current rates

A coupled remote sensing and the Surface Energy Balance with Topography Algorithm (SEBTA) to estimate actual evapotranspiration over heterogeneous terrain

Evapotranspiration (ET) may be used as an ecological indicator to address the ecosystem complexity. The accurate measurement of ET is of great significance for studying environmental sustainability, global climate changes, and biodiversity. Remote sensing technologies are capable of monitoring both energy and water fluxes on the surface of the Earth. With this advancement, existing models, such as SEBAL, S_SEBI and SEBS, enable us to estimate the regional ET with limited temporal and spatial coverage in the study areas. This paper extends the existing modeling efforts with the inclusion of new components for ET estimation at different temporal and spatial scales under heterogeneous terrain with varying elevations, slopes and aspects. Following a coupled remote sensing and surface energy balance approach, this study emphasizes the structure and function of the Surface Energy Balance with Topography Algorithm (SEBTA). With the aid of the elevation and landscape information, such as slope and aspect parameters derived from the digital elevation model (DEM), and the vegetation cover derived from satellite images, the SEBTA can account for the dynamic impacts of heterogeneous terrain and changing land cover with some varying kinetic parameters (i.e., roughness and zero-plane displacement). Besides, the dry and wet pixels can be recognized automatically and dynamically in image processing thereby making the SEBTA more sensitive to derive the sensible heat flux for ET estimation. To prove the application potential, the SEBTA was carried out to present the robust estimates of 24 h solar radiation over time, which leads to the smooth simulation of the ET over seasons in northern China where the regional climate and vegetation cover in different seasons compound the ET calculations. The SEBTA was validated by the measured data at the ground level. During validation, it shows that the consistency index reached 0.92 and the correlation coefficient was 0.87

An automated and improved methodology to retrieve long-time series of evapotranspiration based on remote sensing and reanalysis data

The large-scale quantification of accurate evapotranspiration (ET) time series has substantially been developed in recent decades using automated approaches based on remote sensing data. However, there are still several model-related uncertainties that require precise assessment. In this study, the Surface Energy Balance Algorithm for Land (SEBAL) and meteorological data from the Global Land Data Assimilation System (GLDAS) were used to estimate long-term daily actual ET based on three endmember selection procedures: two land cover-based models, one with (WF) and the other without (WOF) morphological functions, and the Allen method (with the default percentiles) for 2270 Landsat images. Models were evaluated for 23 flux tower sites with four main vegetation cover types as well as different climate types. Results showed that endmember selection with morphological functions (WF_ET) generally performed better than the other endmember approaches. Climate-based classification assessment provided the clearest discrimination between the performance of the different endmember selection approaches for the humid category. For humid zones, the land cover-based methods, especially WF, appropriately outperformed Allen. However, the performance of the three approaches was similar for sub-humid, semi-arid and arid climates together; the Allen approach was therefore recommended to avoid the need for dependency on land cover maps. Tower-by-tower validation also showed that the WF approach performed best at 12 flux tower sites, the WOF approach best at 5 and the Allen approach best at 6, suggesting that the use of land cover maps alone does not explain the differences between the performance of the land cover-based models and the Allen approach. Additionally, the satisfactory error metrics results when comparing the EC estimations with EC measurements, with root mean square error (RMSE) ≈ 0.91 and 1.59 mm·day−1, coefficient of determination (R2) ≈ 0.71 and 0.41, and bias percentage (PBias) ≈ 2% and 60% for crop and non-crop flux tower sites, respectively, supports the use of GLDAS meteorological forcing datasets with the different automated ET estimation approaches. Overall, given that the thorough evaluation of different endmember selection approaches at large scale confirmed the validity of the WF approach for different climate and land cover types, this study can be considered an important contribution to the global retrieval of long time series of ETinfo:eu-repo/semantics/publishedVersio

Evaluation of a surface energy balance method based on optical and thermal satellite imagery to estimate root-zone soil moisture

2014 Fall.Includes bibliographical references.Various remote-sensing methods are available to estimate soil moisture, but few address the fine spatial resolutions (e.g., 30 m grid cells) and root-zone depth requirements of agricultural and other similar applications. One approach that has been previously proposed to estimate fine-resolution soil moisture is to first estimate the evaporative fraction from an energy balance that is inferred from optical and thermal remote-sensing images (e.g., using the ReSET algorithm) and then estimate soil moisture through an empirical relationship to evaporative fraction. A similar approach has also been proposed to estimate the degree of saturation. The primary objective of this study is to evaluate these methods for estimating soil moisture and degree of saturation, particularly for a semiarid grassland with relatively dry conditions. Soil moisture was monitored at twenty-eight field locations in southeastern Colorado with herbaceous vegetation during the summer months of three years. In-situ soil moisture and degree of saturation observations are compared with estimates calculated from Landsat imagery using the ReSET algorithm. The in-situ observations suggest that the empirical relationships with evaporative fraction that have been proposed in previous studies typically provide overestimates of soil moisture and degree of saturation in this region. However, calibrated functions produce estimates with an accuracy that may be adequate for various applications. The estimates produced by this approach are more reliable for degree of saturation than for soil moisture, and the method is more successful at identifying temporal variability than spatial variability in degree of saturation for this region

Evapotranspiration estimates derived using thermal-based satellite remote sensing and data fusion for irrigation management in California vineyards

Irrigation in the Central Valley of California is essential for successful wine grape production. With reductions in water availability in much of California due to drought and competing water-use interests, it is important to optimize irrigation management strategies. In the current study, we investigate the utility of satellite-derived maps of evapotranspiration (ET) and the ratio of actual-to-reference ET (fRET) based on remotely sensed land-surface temperature (LST) imagery for monitoring crop water use and stress in vineyards. The Disaggregated Atmosphere Land EXchange Inverse (ALEXI/DisALEXI) surface-energy balance model, a multi-scale ET remote-sensing framework with operational capabilities, is evaluated over two Pinot noir vineyard sites in central California that are being monitored as part of the Grape Remote-Sensing Atmospheric Profile and Evapotranspiration eXperiment (GRAPEX). A data fusion approach is employed to combine ET time-series retrievals from multiple satellite platforms to generate estimates at both the high spatial (30 m) and temporal (daily) resolution required for field-scale irrigation management. Comparisons with micrometeorological data indicate reasonable model performance, with mean absolute errors of 0.6 mm day−1 in ET at the daily time step and minimal bias. Values of fRET agree well with tower observations and reflect known irrigation. Spatiotemporal analyses illustrate the ability of ALEXI/DisALEXI/data fusion package to characterize heterogeneity in ET and fRET both within a vineyard and over the surrounding landscape. These findings will inform the development of strategies for integrating ET mapping time series into operational irrigation management framework, providing actionable information regarding vineyard water use and crop stress at the field and regional scale and at daily to multi-annual time scales.info:eu-repo/semantics/acceptedVersio