Study of organic molecules and nano-particle/polymer composites for flash memory and switch applications

Thesis (Ph. D.)--Massachusetts Institute of Technology, Dept. of Electrical Engineering and Computer Science, 2012.Cataloged from PDF version of thesis.Includes bibliographical references (p. 205-218).Organic materials exhibit fascinating optical and electronic properties which motivate their hybridization with traditional silicon-based electronics in order to achieve novel functionalities and address scaling challenges of these devices. The application of organic molecules and nano-particle/polymer composites for flash memory and switch applications is studied in this dissertation. Facilitating data storage on individual small molecules as the approach the limits in miniaturization for ultra-high density and low power consumption media may enable orders of magnitude increase in data storage capabilities. A floating gate consisting of a thin film of molecules would provide the advantage of a uniform set of identical nano-structured charge storage elements with high molecular area densities which can result in a several-fold higher density of charge-storage sites as compared to quantum dot (QD) memory and even SONOS devices. Additionally, the discrete charge storage in such nano-segmented floating gate designs limits the impact of any tunnel oxide defects to the charge stored in the proximity of the defect site. The charge retention properties of molecular films was investigated in this dissertation by injecting charges via a biased conductive atomic force microscopy (AFM) tip into molecules comprising the thin films. The Kelvin force microscopy (KFM) results revealed minimal changes in the spatial extent of the charge trapping over time after initial injection. Fabricated memory capacitors show a device durability over 105 program/erase cycles and hysteresis window of up to 12.8 V, corresponding to stored charge densities as high as 5.4x 1013 cm-2, suggesting the potential use of organic molecules in high storage capacity memory cells. Also, these results demonstrate that charge storage properties of the molecular trapping layer can be engineered by rearranging molecules and their a-orbital overlaps via addition of dopant molecules. Finally, the design, fabrication, testing and evaluation of a MEMS switch that employs viscoelastic organic polymers doped with nano-particles as the active material is presented in this dissertation. The conductivity of the nano-composite changes 10,000-fold as it is mechanically compressed. In this demonstration the compressive squeeze is applied with electric actuation. Since squeezing initiates the switching behavior, the device is referred to as a "squitch". The squitch is essentially a new type of FET that is compatible with large area processing with printing or photolithography, on rigid or flexible substrates and can exhibit large on-to-off conduction ratio.by Sarah Paydavosi.Ph.D

Intelligent Circuits and Systems

ICICS-2020 is the third conference initiated by the School of Electronics and Electrical Engineering at Lovely Professional University that explored recent innovations of researchers working for the development of smart and green technologies in the fields of Energy, Electronics, Communications, Computers, and Control. ICICS provides innovators to identify new opportunities for the social and economic benefits of society.　 This conference bridges the gap between academics and R&D institutions, social visionaries, and experts from all strata of society to present their ongoing research activities and foster research relations between them. It provides opportunities for the exchange of new ideas, applications, and experiences in the field of smart technologies and finding global partners for future collaboration. The ICICS-2020 was conducted in two broad categories, Intelligent Circuits & Intelligent Systems and Emerging Technologies in Electrical Engineering

NASA Tech Briefs, May 1997

Topics covered include: Advanced Composites, Plastics and Metals; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Life Sciences; Books and Reports

Toward a new generation of photonic devices based on the integration of metal oxides in silicon technology

[ES] La búsqueda de nuevas soluciones e ideas innovadoras en el campo de la fotónica de silicio mediante la integración de nuevos materiales con prestaciones únicas es un tema de alta actualidad entre la comunidad científica en fotónica y con un impacto potencial muy alto. Dentro de esta temática, esta tesis pretende contribuir hacia una nueva generación de dispositivos fotónicos basados en la integración de óxidos metálicos en tecnología de silicio. Los óxidos metálicos elegidos pertenecen a la familia de óxidos conductores transparentes (TCO), concretamente el óxido de indio y estaño (ITO) y el óxido de cadmio (CdO), y materiales de cambio de fase (PCM) como el dióxido de vanadio (VO2). Dichos materiales se caracterizan especialmente por una variación drástica de sus propiedades optoelectrónicas, tales como la resistividad o el índice de refracción, frente a un estímulo externo ya sea en forma de temperatura, aplicación de un campo eléctrico o excitación óptica. De esta forma, nuestro objetivo es diseñar, fabricar y demostrar experimentalmente nuevas soluciones y dispositivos clave tales como dispositivos no volátiles, desfasadores y dispositivos con no linealidad óptica. Tales dispositivos podrían encontrar potencial utilidad en diversas aplicaciones que comprenden las comunicaciones ópticas, redes neuronales, LiDAR, computación, cuántica, entre otros. Las prestaciones clave en las que se pretende dar un salto disruptivo son el tamaño y capacidad para una alta densidad de integración, el consumo de potencia, y el ancho de banda.[CA] La recerca de noves solucions i idees innovadores al camp de la fotònica de silici mitjançant la integració de nous materials amb prestacions úniques és un tema d'alta actualitat entre la comunitat científica en fotònica i amb un impacte potencial molt alt. D'aquesta temàtica, aquesta tesi pretén contribuir cap a una nova generació de dispositius fotònics basats en la integració d'òxids metàl·lics en tecnologia de silici. Els òxids metàl·lics elegits pertanyen a la família d'òxids conductors transparents (TCO), concretament l'òxid d'indi i estany (ITO) i l'òxid de cadmi (CdO), i materials de canvi de fase (PCM) com el diòxid de vanadi (VO2). Aquests materials es caracteritzen especialment per una variació dràstica de les propietats optoelectròniques, com ara la resistivitat o l'índex de refracció, davant d'un estímul extern ja siga en forma de temperatura, aplicació d'un camp elèctric o excitació òptica. D'aquesta manera, el nostre objectiu és dissenyar, fabricar i demostrar experimentalment noves solucions i dispositius clau com ara dispositius no volàtils, desfasadors i dispositius amb no-linealitat òptica. Aquests dispositius podrien trobar potencial utilitat en diverses aplicacions que comprenen les comunicacions òptiques, xarxes neuronals, LiDAR, computació, quàntica, entre d'altres. Les prestacions clau en què es pretén fer un salt disruptiu són la grandària i la capacitat per a una alta densitat d'integració, el consum de potència i l'amplada de banda.[EN] The search for new solutions and innovative ideas in the field of silicon photonics through the integration of new materials featuring unique optoelectronic properties is a hot topic among the photonics scientific community with a very high potential impact. Within this topic, this thesis aims to contribute to a new generation of photonic devices based on the integration of metal oxides in silicon technology. The chosen metal oxides belong to the family of transparent conducting oxides (TCOs), namely indium tin oxide (ITO) and cadmium oxide (CdO), and phase change materials (PCMs) such as vanadium dioxide (VO2). These materials are characterized by a drastic variation of their optoelectronic properties, such as resistivity or refractive index, in response to an external stimulus either in the form of temperature, application of an electric field, or optical excitation. Therefore, our objective is to design, fabricate and experimentally demonstrate new solutions and key devices such as non-volatile devices, phase shifters, and devices with optical nonlinearity. Such devices could find potential utility in several applications, including optical communications, neural networks, LiDAR, computing, and quantum. The key features in which we aim to take a leapfrog are footprint and capacity for high integration density, power consumption, and bandwidth.This work is supported in part by grants ACIF/2018/172 funded by Generaliltat Valenciana, and FPU17/04224 funded by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future”.Parra Gómez, J. (2022). Toward a new generation of photonic devices based on the integration of metal oxides in silicon technology [Tesis doctoral]. Universitat Politècnica de València. https://doi.org/10.4995/Thesis/10251/19088

NASA Tech Briefs, June 1994

Topics covered include: Microelectronics; Electronic Components and Circuits; Electronic Systems; Physical Sciences; Materials; Computer Programs; Mechanics; Machinery/Automation; Manufacturing/Fabrication; Mathematics and Information Sciences; Life Sciences; Books and Report

An Integrated Control and Data Acquisition System for Pharmaceutical Capsule Inspection

Pharmaphil Inc. manufactures two-part gelatin capsules for the pharmaceutical industry. Their current methods of quality control of their product is by performing manual inspection of every carton of capsules prior to shipment. In today\u27s modern manufacturing world, more efficient and cost-effective means of quality control exist. It is Pharmaphil\u27s desire to develop a custom machine vision system to replace manual inspection with a potential opportunity in the capsule manufacturing quality control market. In collaboration with the Electrical and Computer Engineering Department at the University of Windsor, a novel system was developed to achieve this goal. The objective was to develop a system capable of inspecting 1000 capsules per minute with the ability to detect holes, cracks, dents, bubble, double caps and incorrect colour or size. Using an antiquated machine vision system for capsule inspection from the mid-nineties as a base, a modern inspection system was developed that performed faster and more thorough inspections. As a measure to minimize the overall system cost as well as to increase flexibility, a full custom design was undertaken. The resulting system follows a traditional machine vision system whereby the main components include an image acquisition component, a processing unit and machine control. The designed system uses custom USB2.0 cameras to acquire images, a standard desktop PC to process image data and a custom machine control board to perform machine control and timing. The system operates with four identical quadrants operating in parallel to increase throughput. The final system developed provided a proof-of-concept for the approach taken. The machine control and image acquisition component of the system yielded a maximum throughput of 1200 capsules per minute. After incorporating image inspection, the final result was a system that was capable of inspecting capsules at a rate of about 800 capsules per minute with high accuracy. With optimizations, the system throughput can be further improved. The findings throughout the development of the prototype system provide an excellent basis from which the first generation commercial unit can be designed

Solid State Circuits Technologies

The evolution of solid-state circuit technology has a long history within a relatively short period of time. This technology has lead to the modern information society that connects us and tools, a large market, and many types of products and applications. The solid-state circuit technology continuously evolves via breakthroughs and improvements every year. This book is devoted to review and present novel approaches for some of the main issues involved in this exciting and vigorous technology. The book is composed of 22 chapters, written by authors coming from 30 different institutions located in 12 different countries throughout the Americas, Asia and Europe. Thus, reflecting the wide international contribution to the book. The broad range of subjects presented in the book offers a general overview of the main issues in modern solid-state circuit technology. Furthermore, the book offers an in depth analysis on specific subjects for specialists. We believe the book is of great scientific and educational value for many readers. I am profoundly indebted to the support provided by all of those involved in the work. First and foremost I would like to acknowledge and thank the authors who worked hard and generously agreed to share their results and knowledge. Second I would like to express my gratitude to the Intech team that invited me to edit the book and give me their full support and a fruitful experience while working together to combine this book