Sensing and mapping for interactive performance

This paper describes a trans-domain mapping (TDM) framework for translating meaningful activities from one creative domain onto another. The multi-disciplinary framework is designed to facilitate an intuitive and non-intrusive interactive multimedia performance interface that offers the users or performers real-time control of multimedia events using their physical movements. It is intended to be a highly dynamic real-time performance tool, sensing and tracking activities and changes, in order to provide interactive multimedia performances. From a straightforward definition of the TDM framework, this paper reports several implementations and multi-disciplinary collaborative projects using the proposed framework, including a motion and colour-sensitive system, a sensor-based system for triggering musical events, and a distributed multimedia server for audio mapping of a real-time face tracker, and discusses different aspects of mapping strategies in their context. Plausible future directions, developments and exploration with the proposed framework, including stage augmenta tion, virtual and augmented reality, which involve sensing and mapping of physical and non-physical changes onto multimedia control events, are discussed

Robotic Cameraman for Augmented Reality based Broadcast and Demonstration

In recent years, a number of large enterprises have gradually begun to use vari-ous Augmented Reality technologies to prominently improve the audiences’ view oftheir products. Among them, the creation of an immersive virtual interactive scenethrough the projection has received extensive attention, and this technique refers toprojection SAR, which is short for projection spatial augmented reality. However,as the existing projection-SAR systems have immobility and limited working range,they have a huge difficulty to be accepted and used in human daily life. Therefore,this thesis research has proposed a technically feasible optimization scheme so thatit can be practically applied to AR broadcasting and demonstrations. Based on three main techniques required by state-of-art projection SAR applica-tions, this thesis has created a novel mobile projection SAR cameraman for ARbroadcasting and demonstration. Firstly, by combining the CNN scene parsingmodel and multiple contour extractors, the proposed contour extraction pipelinecan always detect the optimal contour information in non-HD or blurred images.This algorithm reduces the dependency on high quality visual sensors and solves theproblems of low contour extraction accuracy in motion blurred images. Secondly, aplane-based visual mapping algorithm is introduced to solve the difficulties of visualmapping in these low-texture scenarios. Finally, a complete process of designing theprojection SAR cameraman robot is introduced. This part has solved three mainproblems in mobile projection-SAR applications: (i) a new method for marking con-tour on projection model is proposed to replace the model rendering process. Bycombining contour features and geometric features, users can identify objects oncolourless model easily. (ii) a camera initial pose estimation method is developedbased on visual tracking algorithms, which can register the start pose of robot to thewhole scene in Unity3D. (iii) a novel data transmission approach is introduced to establishes a link between external robot and the robot in Unity3D simulation work-space. This makes the robotic cameraman can simulate its trajectory in Unity3D simulation work-space and project correct virtual content. Our proposed mobile projection SAR system has made outstanding contributionsto the academic value and practicality of the existing projection SAR technique. Itfirstly solves the problem of limited working range. When the system is running ina large indoor scene, it can follow the user and project dynamic interactive virtualcontent automatically instead of increasing the number of visual sensors. Then,it creates a more immersive experience for audience since it supports the user hasmore body gestures and richer virtual-real interactive plays. Lastly, a mobile systemdoes not require up-front frameworks and cheaper and has provided the public aninnovative choice for indoor broadcasting and exhibitions

Head motion tracking in 3D space for drivers

Ce travail présente un système de vision par ordinateur capable de faire un suivi du mouvement en 3D de la tête d’une personne dans le cadre de la conduite automobile. Ce système de vision par ordinateur a été conçu pour faire partie d'un système intégré d’analyse du comportement des conducteurs tout en remplaçant des équipements et des accessoires coûteux, qui sont utilisés pour faire le suivi du mouvement de la tête, mais sont souvent encombrants pour le conducteur. Le fonctionnement du système est divisé en quatre étapes : l'acquisition d'images, la détection de la tête, l’extraction des traits faciaux, la détection de ces traits faciaux et la reconstruction 3D des traits faciaux qui sont suivis. Premièrement, dans l'étape d'acquisition d'images, deux caméras monochromes synchronisées sont employées pour former un système stéréoscopique qui facilitera plus tard la reconstruction 3D de la tête. Deuxièmement, la tête du conducteur est détectée pour diminuer la dimension de l’espace de recherche. Troisièmement, après avoir obtenu une paire d’images de deux caméras, l'étape d'extraction des traits faciaux suit tout en combinant les algorithmes de traitement d'images et la géométrie épipolaire pour effectuer le suivi des traits faciaux qui, dans notre cas, sont les deux yeux et le bout du nez du conducteur. Quatrièmement, dans une étape de détection des traits faciaux, les résultats 2D du suivi sont consolidés par la combinaison d'algorithmes de réseau de neurones et la géométrie du visage humain dans le but de filtrer les mauvais résultats. Enfin, dans la dernière étape, le modèle 3D de la tête est reconstruit grâce aux résultats 2D du suivi et ceux du calibrage stéréoscopique des caméras. En outre, on détermine les mesures 3D selon les six axes de mouvement connus sous le nom de degrés de liberté de la tête (longitudinal, vertical, latéral, roulis, tangage et lacet). La validation des résultats est effectuée en exécutant nos algorithmes sur des vidéos préenregistrés des conducteurs utilisant un simulateur de conduite afin d'obtenir des mesures 3D avec notre système et par la suite, à les comparer et les valider plus tard avec des mesures 3D fournies par un dispositif pour le suivi de mouvement installé sur la tête du conducteur.This work presents a computer vision module capable of tracking the head motion in 3D space for drivers. This computer vision module was designed to be part of an integrated system to analyze the behaviour of the drivers by replacing costly equipments and accessories that track the head of a driver but are often cumbersome for the user. The vision module operates in five stages: image acquisition, head detection, facial features extraction, facial features detection, and 3D reconstruction of the facial features that are being tracked. Firstly, in the image acquisition stage, two synchronized monochromatic cameras are used to set up a stereoscopic system that will later make the 3D reconstruction of the head simpler. Secondly the driver’s head is detected to reduce the size of the search space for finding facial features. Thirdly, after obtaining a pair of images from the two cameras, the facial features extraction stage follows by combining image processing algorithms and epipolar geometry to track the chosen features that, in our case, consist of the two eyes and the tip of the nose. Fourthly, in a detection stage, the 2D tracking results are consolidated by combining a neural network algorithm and the geometry of the human face to discriminate erroneous results. Finally, in the last stage, the 3D model of the head is reconstructed from the 2D tracking results (e.g. tracking performed in each image independently) and calibration of the stereo pair. In addition 3D measurements according to the six axes of motion known as degrees of freedom of the head (longitudinal, vertical and lateral, roll, pitch and yaw) are obtained. The validation of the results is carried out by running our algorithms on pre-recorded video sequences of drivers using a driving simulator in order to obtain 3D measurements to be compared later with the 3D measurements provided by a motion tracking device installed on the driver’s head

Co-Fusion: Real-time Segmentation, Tracking and Fusion of Multiple Objects

In this paper we introduce Co-Fusion, a dense SLAM system that takes a live stream of RGB-D images as input and segments the scene into different objects (using either motion or semantic cues) while simultaneously tracking and reconstructing their 3D shape in real time. We use a multiple model fitting approach where each object can move independently from the background and still be effectively tracked and its shape fused over time using only the information from pixels associated with that object label. Previous attempts to deal with dynamic scenes have typically considered moving regions as outliers, and consequently do not model their shape or track their motion over time. In contrast, we enable the robot to maintain 3D models for each of the segmented objects and to improve them over time through fusion. As a result, our system can enable a robot to maintain a scene description at the object level which has the potential to allow interactions with its working environment; even in the case of dynamic scenes.Comment: International Conference on Robotics and Automation (ICRA) 2017, http://visual.cs.ucl.ac.uk/pubs/cofusion, https://github.com/martinruenz/co-fusio

Toward a model of computational attention based on expressive behavior: applications to cultural heritage scenarios

Our project goals consisted in the development of attention-based analysis of human expressive behavior and the implementation of real-time algorithm in EyesWeb XMI in order to improve naturalness of human-computer interaction and context-based monitoring of human behavior. To this aim, perceptual-model that mimic human attentional processes was developed for expressivity analysis and modeled by entropy. Museum scenarios were selected as an ecological test-bed to elaborate three experiments that focus on visitor profiling and visitors flow regulation

Vision-Based Three Dimensional Hand Interaction In Markerless Augmented Reality Environment

Kemunculan realiti tambahan membolehkan objek maya untuk wujud bersama dengan dunia sebenar dan ini memberi kaedah baru untuk berinteraksi dengan objek maya. Sistem realiti tambahan memerlukan penunjuk tertentu, seperti penanda untuk menentukan bagaimana objek maya wujud dalam dunia sebenar. Penunjuk tertentu mesti diperolehi untuk menggunakan sistem realiti tambahan, tetapi susah untuk seseorang mempunyai penunjuk tersebut pada bila-bila masa. Tangan manusia, yang merupakan sebahagian dari badan manusia dapat menyelesaikan masalah ini. Selain itu, tangan boleh digunakan untuk berinteraksi dengan objek maya dalam dunia realiti tambahan. Tesis ini membentangkan sebuah sistem realiti tambahan yang menggunakan tangan terbuka untuk pendaftaran objek maya dalam persekitaran sebenar dan membolehkan pengguna untuk menggunakan tangan yang satu lagi untuk berinteraksi dengan objek maya yang ditambahkan dalam tiga-matra. Untuk menggunakan tangan untuk pendaftaran dan interaksi dalam realiti tambahan, postur dan isyarat tangan pengguna perlu dikesan. The advent of augmented reality (AR) enables virtual objects to be superimposed on the real world and provides a new way to interact with the virtual objects. AR system requires an indicator to determine for how the virtual objects aligned in the real world. The indicator must first be obtained to access to a particular AR system. It may be inconvenient to have the indicator in reach at all time. Human hand, which is part of the human body may be a solution for this. Besides, hand is also a promising tool for interaction with virtual objects in AR environment. This thesis presents a markerless Augmented Reality system which utilizes outstretched hand for registration of virtual objects in the real environment and enables the users to have three dimensional (3D) interaction with the augmented virtual objects. To employ the hand for registration and interaction in AR, hand postures and gestures that the user perform has to be recognized

Active modelling of virtual humans

This thesis provides a complete framework that enables the creation of photorealistic 3D human models in real-world environments. The approach allows a non-expert user to use any digital capture device to obtain four images of an individual and create a personalised 3D model, for multimedia applications. To achieve this, it is necessary that the system is automatic and that the reconstruction process is flexible to account for information that is not available or incorrectly captured. In this approach the individual is automatically extracted from the environment using constrained active B-spline templates that are scaled and automatically initialised using only image information. These templates incorporate the energy minimising framework for Active Contour Models, providing a suitable and flexible method to deal with the adjustments in pose an individual can adopt. The final states of the templates describe the individual’s shape. The contours in each view are combined to form a 3D B-spline surface that characterises an individual’s maximal silhouette equivalent. The surface provides a mould that contains sufficient information to allow for the active deformation of an underlying generic human model. This modelling approach is performed using a novel technique that evolves active-meshes to 3D for deforming the underlying human model, while adaptively constraining it to preserve its existing structure. The active-mesh approach incorporates internal constraints that maintain the structural relationship of the vertices of the human model, while external forces deform the model congruous to the 3D surface mould. The strength of the internal constraints can be reduced to allow the model to adopt the exact shape of the bounding volume or strengthened to preserve the internal structure, particularly in areas of high detail. This novel implementation provides a uniform framework that can be simply and automatically applied to the entire human model