The Coverage, Capacity and Coexistence of Mixed High Altitude Platform and Terrestrial Segments

This thesis explores the coverage, capacity and coexistence of High Altitude Platform (HAP) and terrestrial segments in the same service area. Given the limited spectrum available, mechanisms to manage the co-channel interference to enable effective coexistence between the two infrastructures are examined. Interference arising from the HAP, caused by the relatively high transmit power and the antenna beam profile, has the potential to significantly affect the existing terrestrial system on the ground if the HAP beams are deployed without a proper strategy. Beam-pointing strategies exploiting phased array antennas on the HAPs are shown to be an effective way to place the beams, with each of them forming service cells onto the ground in the service area, especially dense user areas. Using a newly developed RF clustering technique to better point the cells over an area of a dense group of users, it is shown that near maximum coverage of 96% of the population over the service area can be provided while maintaining the coexistence with the existing terrestrial system. To improve the user experience at the cell edge, while at the same time improving the overall capacity of the system, Joint Transmission – Coordinated Multipoint (JT-CoMP) is adapted for a HAP architecture. It is shown how the HAP can potentially enable the tight scheduling needed to perform JT-CoMP due to the centralisation of all virtual E-UTRAN Node Bs (eNodeBs) on the HAP. A trade-off between CINR gain and loss of capacity when adapting JT-CoMP into the HAP system is identified, and strategies to minimise the trade-off are considered. It is shown that 57% of the users benefit from the JT-CoMP. In order to enable coordination between the HAP and terrestrial segments, a joint architecture based on a Cloud – Radio Access Network (C-RAN) system is introduced. Apart from adapting a C-RAN based system to centrally connect the two segments together, the network functional split which varies the degree of the centralised processing is also considered to deal with the limitations of HAP fronthaul link requirements. Based on the fronthaul link requirements acquired from the different splitting options, the ground relay station diversity to connect the HAP to centralised and distributed units (CUs and DUs) is also considered

Unmanned Aerial Vehicle (UAV)-Enabled Wireless Communications and Networking

The emerging massive density of human-held and machine-type nodes implies larger traffic deviatiolns in the future than we are facing today. In the future, the network will be characterized by a high degree of flexibility, allowing it to adapt smoothly, autonomously, and efficiently to the quickly changing traffic demands both in time and space. This flexibility cannot be achieved when the network’s infrastructure remains static. To this end, the topic of UAVs (unmanned aerial vehicles) have enabled wireless communications, and networking has received increased attention. As mentioned above, the network must serve a massive density of nodes that can be either human-held (user devices) or machine-type nodes (sensors). If we wish to properly serve these nodes and optimize their data, a proper wireless connection is fundamental. This can be achieved by using UAV-enabled communication and networks. This Special Issue addresses the many existing issues that still exist to allow UAV-enabled wireless communications and networking to be properly rolled out

Optimisation of a propagation model for last mile connectivity with low altitude platforms using machine learning

This thesis was submitted for the award of Doctor of Philosophy and was awarded by Brunel University LondonOur related research review on propagation models reveals six factors that are significant in last mile connectivity via LAP: path loss, elevation angle, LAP altitude, coverage area, power consumption, operation frequency, interference, and antenna type. These factors can help with monitoring system performance, network planning, coverage footprint, receivers’ line-of-sight, quality of service requirements, and data rates which may all vary in response to geomorphology characteristics. Several competing propagation models have been proposed over the years but whilst they collectively raise many shortcomings such as limited altitude up to few tens of meters, lack of cover across different environments, low perdition accuracy they also exhibit several advantages. Four propagation models, which are representatives of their types, have been selected since they exhibit advantages in relation to high altitude, wide coverage range, adaption across different terrains. In addition, all four have been extensively deployed in the past and as a result their correction factors have evolved over the years to yield extremely accurate results which makes the development and evaluation aspects of this research very precise. The four models are: ITU-R P.529-3, Okumura, Hata-Davidson, and ATG. The aim of this doctoral research is to design a new propagation model for last-mile connectivity using LAPs technology as an alternative to aerial base station that includes all six factors but does not exhibit any of the shortcomings of existing models. The new propagation model evolves from existing models using machine learning. The four models are first adapted to include the elevation angle alongside the multiple-input multiple-output diversity gain, our first novelty in propagation modelling. The four adapted models are then used as input in a Neural Network framework and their parameters are clustered in a Self-Organizing-Map using a minimax technique. The framework evolves an optimal propagation model that represents the main research contribution of this research. The optimal propagation model is deployed in two proof-of-concept applications, a wireless sensor network, and a cellular structure. The performance of the optimal model is evaluated and then validated against that of the four adapted models first in relation to predictions reported in the literature and then in the context of the two proof-of-concept applications. The predictions of the optimised model are significantly improved in comparison to those of the four adapted propagation models. Each of the two proof-of-concept applications also represent a research novelty.The Royal Saudi Embassy and the Saudi Cultural Bureau in London, and Taif University in the Kingdom of Saudi Arabia