PATH TRACKING FOR THE CONVOY OF AUTONOMOUS VEHICLES BASED ON A NON-LINEAR PREDICTIVE CONTROL

International audienceIn this paper, a nonlinear predictive control of a platoon of several vehicles is proposed by using non-linear robotic form model of the vehicles. The model used represents the longitudinal, lateral and yaw movement for each vehicle in the fleet. this control approach allows controlling the fleet, uses the available information, ensures a safe distance between vehicles to avoid collisions and follows the path of the leader. The robustness of the control will be studied in order to assess the different errors occurring in the estimated parameters values

Non-linear Control based on State Estimation for the Convoy of Autonomous Vehicles

International audienceIn this paper, a longitudinal and lateral control approach based on a nonlinear observer is proposed for a convoy of autonomous vehicles to follow a desired trajectory. To authors best knowledge, this topic has not yet been sufficiently addressed in the literature. The modeling of the vehicles convoy is revisited using robotic method, for simulation purposes and control design. With these models, a sliding mode observer is proposed to estimate the states of each vehicle in the convoy from the available sensors, then a sliding mode control based on this observer is used to control the longitudinal and lateral movement. The validation and performance evaluation are done using the well-known driving simulator Scanner-Studio. The results are presented for different maneuvers of 5 vehicles

Improved information flow topology for vehicle convoy control

A vehicle convoy is a string of inter-connected vehicles moving together for mutual support, minimizing traffic congestion, facilitating people safety, ensuring string stability and maximizing ride comfort. There exists a trade-off among the convoy's performance indices, which is inherent in any existing vehicle convoy. The use of unrealistic information flow topology (IFT) in vehicle convoy control, generally affects the overall performance of the convoy, due to the undesired changes in dynamic parameters (relative position, speed, acceleration and jerk) experienced by the following vehicle. This thesis proposes an improved information flow topology for vehicle convoy control. The improved topology is of the two-vehicle look-ahead and rear-vehicle control that aimed to cut-off the trade-off with a more robust control structure, which can handle constraints, wider range of control regions and provide acceptable performance simultaneously. The proposed improved topology has been designed in three sections. The first section explores the single vehicle's dynamic equations describing the derived internal and external disturbances modeled together as a unit. In the second section, the vehicle model is then integrated into the control strategy of the improved topology in order to improve the performance of the convoy to two look-ahead and rear. The changes in parameters of the improved convoy topology are compared through simulation with the most widely used conventional convoy topologies of one-vehicle look-ahead and that of the most human-driver like (the two-vehicle look-ahead) convoy topology. The results showed that the proposed convoy control topology has an improved performance with an increase in the intervehicular spacing by 19.45% and 18.20% reduction in acceleration by 20.28% and 15.17% reduction in jerk by 25.09% and 6.25% as against the one-look-ahead and twolook- ahead respectively. Finally, a model predictive control (MPC) system was designed and combined with the improved convoy topology to strictly control the following vehicle. The MPC serves the purpose of handling constraints, providing smoother and satisfactory responses and providing ride comfort with no trade-off in terms of performance or stability. The performance of the proposed MPC based improved convoy topology was then investigated via simulation and the results were compared with the previously improved convoy topology without MPC. The improved convoy topology with MPC provides safer inter-vehicular spacing by 13.86% refined the steady speed to maneuvering speed, provided reduction in acceleration by 32.11% and a huge achievement was recorded in reduction in jerk by 55.12% as against that without MPC. This shows that the MPC based improved convoy control topology gave enough spacing for any uncertain application of brake by the two look-ahead or further acceleration from the rear-vehicle. Similarly, manoeuvering speed was seen to ensure safety ahead and rear, ride comfort was achieved due to the low acceleration and jerk of the following vehicle. The controlling vehicle responded to changes, hence good handling was achieved

Comparison of lateral controllers for autonomous vehicle : experimental results

International audienceA good path tracker is one of the keys for the successful development of a self-driving car. In the literature, there exists a wide variety of techniques, some complex and some simple and yet effective in particular scenarios. The choice of the path tracker influences the performance in terms of precision, stability and passenger comfort. This paper addresses the lateral control of a self-driving car in an urban environment, where speed is not high but variations in velocity and curvature are frequent. In choosing a lateral controller, simplicity, efficiency and robustness are considered as the main criteria. In this paper, three classical techniques used for controlling the lateral error are analyzed: pure pursuit, Stanley and a simplified kinematic steering control. Additionally , a novel kinematic controller based on the lateral speed is proposed. A home-made realistic simulation environment has been developed to allow rapid testing of the control laws. The relevance of this work has been demonstrated for all controllers through realistic simulations and experiments. The experimental site is the campus of Ecole Centrale de Nantes, where all control laws have been compared along the same path. A longer path, involving a portion of the ring road of Nantes (France) has been simulated. It involves speeds up to 90 km/h, allowing to extrapolate the comparison results to higher velocities

Distributed, decentralised and compensational mechanisms for platoon formation

Verkehrsprobleme nehmen mit der weltweiten Urbanisierung und der Zunahme der Anzahl der Fahrzeuge pro Kopf zu. Platoons, eine Formation von eng hintereinander fahrenden Fahrzeugen, stellen sich als mögliche Lösung dar, da bestehende Forschungen darauf hinweisen, dass sie zu einer besseren Straßenauslastung beitragen, den Kraftstoffverbrauch und die Emissionen reduzieren und Engpässe schneller entlasten können. Rund um das Thema Platooning gibt es viele Aspekte zu erforschen: Sicherheit, Stabilität, Kommunikation, Steuerung und Betrieb, die allesamt notwendig sind, um den Einsatz von Platooning im Alltagsverkehr näher zu bringen. Während in allen genannten Bereichen bereits umfangreiche Forschungen durchgeführt wurden, gibt es bisher nur wenige Arbeiten, die sich mit der logischen Gruppierung von Fahrzeugen in Platoons beschäftigen. Daher befasst sich diese Arbeit mit dem noch wenig erforschten Problem der Platoonbildung, wobei sich die vorhandenen Beispiele mit auf Autobahnen fahrenden Lastkraftwagen beschäftigen. Diese Fälle befinden sich auf der strategischen und taktischen Ebene der Planung, da sie von einem großen Zeithorizont profitieren und die Gruppierung entsprechend optimiert werden kann. Die hier vorgestellten Ansätze befinden sich hingegen auf der operativen Ebene, indem Fahrzeuge aufgrund der verteilten und dezentralen Natur dieser Ansätze spontan und organisch gruppiert und gesteuert werden. Dadurch entstehen sogenannte opportunistische Platoons, die aufgrund ihrer Flexibilität eine vielversprechende Voraussetzung für alle Netzwerkarte bieten könnten. Insofern werden in dieser Arbeit zwei neuartige Algorithmen zur Bildung von Platoons vorgestellt: ein verteilter Ansatz, der von klassischen Routing-Problemen abgeleitet wurde, und ein ergänzender dezentraler kompensatorischer Ansatz. Letzteres nutzt automatisierte Verhandlungen, um es den Fahrzeugen zu erleichtern, sich auf der Basis eines monetären Austausches in einem Platoon zu organisieren. In Anbetracht der Tatsache, dass alle Verkehrsteilnehmer über eine Reihe von Präferenzen, Einschränkungen und Zielen verfügen, muss das vorgeschlagene System sicherstellen, dass jede angebotene Lösung für die einzelnen Fahrzeuge akzeptabel und vorteilhaft ist und den möglichen Aufwand, die Kosten und die Opfer überwiegt. Dies wird erreicht, indem den Platooning-Fahrzeugen eine Form von Anreiz geboten wird, im Sinne von entweder Kostensenkung oder Ampelpriorisierung. Um die vorgeschlagenen Algorithmen zu testen, wurde eine Verkehrssimulation unter Verwendung realer Netzwerke mit realistischer Verkehrsnachfrage entwickelt. Die Verkehrsteilnehmer wurden in Agenten umgewandelt und mit der notwendigen Funktionalität ausgestattet, um Platoons zu bilden und innerhalb dieser zu operieren. Die Anwendbarkeit und Eignung beider Ansätze wurde zusammen mit verschiedenen anderen Aspekten untersucht, die den Betrieb von Platoons betreffen, wie Größe, Verkehrszustand, Netzwerkpositionierung und Anreizmethoden. Die Ergebnisse zeigen, dass die vorgeschlagenen Mechanismen die Bildung von spontanen Platoons ermöglichen. Darüber hinaus profitierten die teilnehmenden Fahrzeuge mit dem auf verteilter Optimierung basierenden Ansatz und unter Verwendung kostensenkender Anreize unabhängig von der Platoon-Größe, dem Verkehrszustand und der Positionierung, mit Nutzenverbesserungen von 20% bis über 50% im Vergleich zur untersuchten Baseline. Bei zeitbasierten Anreizen waren die Ergebnisse uneinheitlich, wobei sich der Nutzen einiger Fahrzeuge verbesserte, bei einigen keine Veränderung eintrat und bei anderen eine Verschlechterung zu verzeichnen war. Daher wird die Verwendung solcher Anreize aufgrund ihrer mangelnden Pareto-Effizienz nicht empfohlen. Der kompensatorische und vollständig dezentralisierte Ansatz weißt einige Vorteile auf, aber die daraus resultierende Verbesserung war insgesamt vernachlässigbar. Die vorgestellten Mechanismen stellen einen neuartigen Ansatz zur Bildung von Platoons dar und geben einen aussagekräftigen Einblick in die Mechanik und Anwendbarkeit von Platoons. Dies schafft die Voraussetzungen für zukünftige Erweiterungen in der Planung, Konzeption und Implementierung effektiverer Infrastrukturen und Verkehrssysteme.Traffic problems have been on the rise corresponding with the increase in worldwide urbanisation and the number of vehicles per capita. Platoons, which are a formation of vehicles travelling close together, present themselves as a possible solution, as existing research indicates that they can contribute to better road usage, reduce fuel consumption and emissions and decongest bottlenecks faster. There are many aspects to be explored pertaining to the topic of platooning: safety, stability, communication, controllers and operations, all of which are necessary to bring platoons closer to use in everyday traffic. While extensive research has already made substantial strides in all the aforementioned fields, there is so far little work on the logical grouping of vehicles in platoons. Therefore, this work addresses the platoon formation problem, which has not been heavily researched, with existing examples being focused on large, freight vehicles travelling on highways. These cases find themselves on the strategic and tactical level of planning since they benefit from a large time horizon and the grouping can be optimised accordingly. The approaches presented here, however, are on the operational level, grouping and routing vehicles spontaneously and organically thanks to their distributed and decentralised nature. This creates so-called opportunistic platoons which could provide a promising premise for all networks given their flexibility. To this extent, this thesis presents two novel platoon forming algorithms: a distributed approach derived from classical routing problems, and a supplementary decentralised compensational approach. The latter uses automated negotiation to facilitate vehicles organising themselves in a platoon based on monetary exchanges. Considering that all traffic participants have a set of preferences, limitations and goals, the proposed system must ensure that any solution provided is acceptable and beneficial for the individual vehicles, outweighing any potential effort, cost and sacrifices. This is achieved by offering platooning vehicles some form of incentivisation, either cost reductions or traffic light prioritisation. To test the proposed algorithms, a traffic simulation was developed using real networks with realistic traffic demand. The traffic participants were transformed into agents and given the necessary functionality to build platoons and operate within them. The applicability and suitability of both approaches were investigated along with several other aspects pertaining to platoon operations such as size, traffic state, network positioning and incentivisation methods. The results indicate that the mechanisms proposed allow for spontaneous platoons to be created. Moreover, with the distributed optimisation-based approach and using cost-reducing incentives, participating vehicles benefited regardless of the platoon size, traffic state and positioning, with utility improvements ranging from 20% to over 50% compared to the studied baseline. For time-based incentives the results were mixed, with the utility of some vehicles improving, some seeing no change and for others, deteriorating. Therefore, the usage of such incentives would not be recommended due to their lack of Pareto-efficiency. The compensational and completely decentralised approach shows some benefits, but the resulting improvement was overall negligible. The presented mechanisms are a novel approach to platoon formation and provide meaningful insight into the mechanics and applicability of platoons. This sets the stage for future expansions into planning, designing and implementing more effective infrastructures and traffic systems

State Freight Plan, January 2023

The primary purpose of the Iowa State Freight Plan (State Freight Plan) is to document the immediate and long-range freight planning activities and investments in the state. More specifically, it will provide guidance on how to address issues, adapt to emerging trends, and invest strategically in the freight system to grow a stronger economy, strengthen the nation’s competitive advantage, and enhance the quality of life for Iowans

Evaluation of Highway Geometrics Related to Large Trucks

One objective of this study was to determine the extent of highway safety and geometric problems associated with larger trucks using Kentucky\u27s highways. The accident analysis involved both a general analysis of all truck accidents statewide as well as the identification of specific high-accident locations. A second objective was to identify criteria which can be used in identifying roadway sections that cannot safely accommodate large trucks. The accident analysis given can be used to investigate locations which have a high number of truck accidents. The general accident statistics related to trucks can be used in the investigation of the high-accident locations to identify factors which may be contributing to the accident problem. The summary of information obtained from the review of literature can be used as a guide when determining the appropriate criteria to use in formalizing truck access criteria. For example, several references gave recommendations concerning lane width and horizontal curvature appropriate for highways that allowed large truck traffic

Case Studies and Annotated Bibliography of Truck Accident Countermeasures on Urban Freeways

DTFH61-90-C-00029To address the growing problem of congestion caused by incidents, especially truck-involved incidents, this study was undertaken to identify truck accident countermeasures which have been used nationwide. Desired conditions surrounding implemented countermeasures in this study included urban freeway volumes of 95,000 vehicles per day or higher, a significant number of trucks in the traffic stream (typically 5% or more), and countermeasures involving road design. The study omitted countermeasures directly related to the vehicle and the driver. This project included the following steps: literature search, telephone survey, and field visits to selected sites. The information collected by this project is intended to assist agencies in identifying, selecting, and implementing truck accident countermeasures. Information was gathered on the following truck accident countermeasures: lane restrictions, separate truck roadways, urban inspection stations, ramp treatments, major incident response and clearance, and truck bans/diversion and time restrictions. The detailed information found in this document is summarized in the final report, FHWA-RD-92-059 (TRIS 662764)