Energy Efficiency and Asymptotic Performance Evaluation of Beamforming Structures in Doubly Massive MIMO mmWave Systems

Future cellular systems based on the use of millimeter waves will heavily rely on the use of antenna arrays both at the transmitter and at the receiver. For complexity reasons and energy consumption issues, fully digital precoding and postcoding structures may turn out to be unfeasible, and thus suboptimal structures, making use of simplified hardware and a limited number of RF chains, have been investigated. This paper considers and makes a comparative assessment, both from a spectral efficiency and energy efficiency point of view, of several suboptimal precoding and postcoding beamforming structures for a cellular multiuser MIMO (MU-MIMO) system with large number of antennas. Analytical formulas for the asymptotic achievable spectral efficiency and for the global energy efficiency of several beamforming structures are derived in the large number of antennas regime. Using the most recently available data for the energy consumption of phase shifters and switches, we show that fully-digital beamformers may actually achieve a larger energy efficiency than lower-complexity solutions, as well as that low-complexity beam-steering purely analog beamforming may in some cases represent a good performance-complexity trade-off solution.Comment: Submitted to IEEE Transactions on Green Communications and Networkin

Separation Framework: An Enabler for Cooperative and D2D Communication for Future 5G Networks

Soaring capacity and coverage demands dictate that future cellular networks need to soon migrate towards ultra-dense networks. However, network densification comes with a host of challenges that include compromised energy efficiency, complex interference management, cumbersome mobility management, burdensome signaling overheads and higher backhaul costs. Interestingly, most of the problems, that beleaguer network densification, stem from legacy networks' one common feature i.e., tight coupling between the control and data planes regardless of their degree of heterogeneity and cell density. Consequently, in wake of 5G, control and data planes separation architecture (SARC) has recently been conceived as a promising paradigm that has potential to address most of aforementioned challenges. In this article, we review various proposals that have been presented in literature so far to enable SARC. More specifically, we analyze how and to what degree various SARC proposals address the four main challenges in network densification namely: energy efficiency, system level capacity maximization, interference management and mobility management. We then focus on two salient features of future cellular networks that have not yet been adapted in legacy networks at wide scale and thus remain a hallmark of 5G, i.e., coordinated multipoint (CoMP), and device-to-device (D2D) communications. After providing necessary background on CoMP and D2D, we analyze how SARC can particularly act as a major enabler for CoMP and D2D in context of 5G. This article thus serves as both a tutorial as well as an up to date survey on SARC, CoMP and D2D. Most importantly, the article provides an extensive outlook of challenges and opportunities that lie at the crossroads of these three mutually entangled emerging technologies.Comment: 28 pages, 11 figures, IEEE Communications Surveys & Tutorials 201

Subspace Tracking and Least Squares Approaches to Channel Estimation in Millimeter Wave Multiuser MIMO

The problem of MIMO channel estimation at millimeter wave frequencies, both in a single-user and in a multi-user setting, is tackled in this paper. Using a subspace approach, we develop a protocol enabling the estimation of the right (resp. left) singular vectors at the transmitter (resp. receiver) side; then, we adapt the projection approximation subspace tracking with deflation and the orthogonal Oja algorithms to our framework and obtain two channel estimation algorithms. We also present an alternative algorithm based on the least squares approach. The hybrid analog/digital nature of the beamformer is also explicitly taken into account at the algorithm design stage. In order to limit the system complexity, a fixed analog beamformer is used at both sides of the communication links. The obtained numerical results, showing the accuracy in the estimation of the channel matrix dominant singular vectors, the system achievable spectral efficiency, and the system bit-error-rate, prove that the proposed algorithms are effective, and that they compare favorably, in terms of the performance-complexity trade-off, with respect to several competing alternatives.Comment: To appear on the IEEE Transactions on Communication

Performance Analysis for 5G cellular networks: Millimeter Wave and UAV Assisted Communications

Recent years have witnessed exponential growth in mobile data and traffic. Limited available spectrum in microwave ($\mu$Wave) bands does not seem to be capable of meeting this demand in the near future, motivating the move to new frequency bands. Therefore, operating with large available bandwidth at millimeter wave (mmWave) frequency bands, between 30 and 300 GHz, has become an appealing choice for the fifth generation (5G) cellular networks. In addition to mmWave cellular networks, the deployment of unmanned aerial vehicle (UAV) base stations (BSs), also known as drone BSs, has attracted considerable attention recently as a possible solution to meet the increasing data demand. UAV BSs are expected to be deployed in a variety of scenarios including public safety communications, data collection in Internet of Things (IoT) applications, disasters, accidents, and other emergencies and also temporary events requiring substantial network resources in the short-term. In these scenarios, UAVs can provide wireless connectivity rapidly. In this thesis, analytical frameworks are developed to analyze and evaluate the performance of mmWave cellular networks and UAV assisted cellular networks. First, the analysis of average symbol error probability (ASEP) in mmWave cellular networks with Poisson Point Process (PPP) distributed BSs is conducted using tools from stochastic geometry. Secondly, we analyze the energy efficiency of relay-assisted downlink mmWave cellular networks. Then, we provide an stochastic geometry framework to study heterogeneous downlink mmWave cellular networks consisting of $K$ tiers of randomly located BSs, assuming that each tier operates in a mmWave frequency band. We further study the uplink performance of the mmWave cellular networks by considering the coexistence of cellular and potential D2D user equipments (UEs) in the same band. In addition to mmWave cellular networks, the performance of UAV assisted cellular networks is also studied. Signal-to-interference-plus-noise ratio (SINR) coverage performance analysis for UAV assisted networks with clustered users is provided. Finally, we study the energy coverage performance of UAV energy harvesting networks with clustered users

Millimeter Wave Outdoor Cellular Networks: Stochastic Geometry Channel Modeling And Performance Analysis

Future cellular networks will use millimeter wave (MMW) spectrum to enable extremely high data rates. Although this spectrum offers numerous significant performance improvements in wireless networks, MMW frequencies also have unique propagation characteristics and hardware constraints, which require revisiting the prior channel modeling and system design. In this thesis, we develop a geometry-based stochastic channel model to characterize the effect of the first-order reflection paths. We consider random locations, sizes and orientations of buildings and derive a closed-form expression for the power delay profile contributed by the first-order reflection paths. We show that wireless networks can benefit from buildings in the communication area, as the external building surfaces render reflection paths whose signal powers are comparable to that of the direct path. Dense base station (BS) deployments are required to overcome the signal losses due to blockages, which unfortunately introduce additional interference at the receiver. We propose a BS coordination scheme to improve the user performance in the dense MMW cellular networks. We derive expressions for the signal-to-interference and noise ratio (SINR) coverage probability and area spectral efficiency (ASE) by incorporating the peculiarity characteristics of MMW communications. Our results show a significant improvement in performance in terms of SINR coverage probability and ASE. In this thesis, we also investigate the uplink performance of the MMW cellular networks. We model the locations of users as of a Poisson cluster process and develop an analytical expression to evaluate the SINR coverage probability. We study the performances of a typical BS for two association strategies, i.e., the closest-selection (CS) and the strongest-selection (SS). Our results show that regarding SINR coverage probability, the SS strategy outperforms the CS strategy in the environment with dense blockages