Uplink Sounding Reference Signal Coordination to Combat Pilot Contamination in 5G Massive MIMO

To guarantee the success of massive multiple-input multiple-output (MIMO), one of the main challenges to solve is the efficient management of pilot contamination. Allocation of fully orthogonal pilot sequences across the network would provide a solution to the problem, but the associated overhead would make this approach infeasible in practical systems. Ongoing fifth-generation (5G) standardisation activities are debating the amount of resources to be dedicated to the transmission of pilot sequences, focussing on uplink sounding reference signals (UL SRSs) design. In this paper, we extensively evaluate the performance of various UL SRS allocation strategies in practical deployments, shedding light on their strengths and weaknesses. Furthermore, we introduce a novel UL SRS fractional reuse (FR) scheme, denoted neighbour-aware FR (FR-NA). The proposed FR-NA generalizes the fixed reuse paradigm, and entails a tradeoff between i) aggressively sharing some UL SRS resources, and ii) protecting other UL SRS resources with the aim of relieving neighbouring BSs from pilot contamination. Said features result in a cell throughput improvement over both fixed reuse and state-of-the-art FR based on a cell-centric perspective

Reciprocity Calibration for Massive MIMO: Proposal, Modeling and Validation

This paper presents a mutual coupling based calibration method for time-division-duplex massive MIMO systems, which enables downlink precoding based on uplink channel estimates. The entire calibration procedure is carried out solely at the base station (BS) side by sounding all BS antenna pairs. An Expectation-Maximization (EM) algorithm is derived, which processes the measured channels in order to estimate calibration coefficients. The EM algorithm outperforms current state-of-the-art narrow-band calibration schemes in a mean squared error (MSE) and sum-rate capacity sense. Like its predecessors, the EM algorithm is general in the sense that it is not only suitable to calibrate a co-located massive MIMO BS, but also very suitable for calibrating multiple BSs in distributed MIMO systems. The proposed method is validated with experimental evidence obtained from a massive MIMO testbed. In addition, we address the estimated narrow-band calibration coefficients as a stochastic process across frequency, and study the subspace of this process based on measurement data. With the insights of this study, we propose an estimator which exploits the structure of the process in order to reduce the calibration error across frequency. A model for the calibration error is also proposed based on the asymptotic properties of the estimator, and is validated with measurement results.Comment: Submitted to IEEE Transactions on Wireless Communications, 21/Feb/201

Achieving Large Multiplexing Gain in Distributed Antenna Systems via Cooperation with pCell Technology

In this paper we present pCellTM technology, the first commercial-grade wireless system that employs cooperation between distributed transceiver stations to create concurrent data links to multiple users in the same spectrum. First we analyze the per-user signal-to-interference-plus-noise ratio (SINR) employing a geometrical spatial channel model to define volumes in space of coherent signal around user antennas (or personal cells, i.e., pCells). Then we describe the system architecture consisting of a general-purpose-processor (GPP) based software-defined radio (SDR) wireless platform implementing a real-time LTE protocol stack to communicate with off-the-shelf LTE devices. Finally we present experimental results demonstrating up to 16 concurrent spatial channels for an aggregate average spectral efficiency of 59.3 bps/Hz in the downlink and 27.5 bps/Hz in the uplink, providing data rates of 200 Mbps downlink and 25 Mbps uplink in 5 MHz of TDD spectrum.Comment: IEEE Asilomar Conference on Signals, Systems, and Computers, Nov. 8-11th 2015, Pacific Grove, CA, US

Optimize Power Allocation Scheme to Maximize Sum Rate in CoMP with Limited Channel State Information

Extensive use of mobile applications throws many challenges in cellular systems like cell edge throughput, inter cell interference and spectral e�ciency. Many of these challenges have been resolved using Coordinated Multi-Point (CoMP), developed in the Third Generation Partnership Project for LTE-Advanced) to a great extent. CoMP cooperatively process signals from base sta- tions that are connected to various multiple terminals (user equipment (UEs)) at transmission and reception. This CoMP improves throughput, reduces or even removes inter-cell interference and increases spectral e�ciency in the downlink of multi-antenna coordinated multipoint systems. Many researchers addressed these issues assuming that BSs have the knowledge of the common control channels dedicated to all UEs and also about the full or partial channel state information (CSI) of all the links. From the CSI available at the BSs, multiuser interference can be managed at the BSs. To make this feasible, UEs are responsible for collecting downlink CSI. But, CSI measurement (instantaneous and/or statistical) is imperfect in nature because of the randomly varying nature of the channels at random times. These incorrect CSI values available at the BSs may, in turn, create multi-user interference. There are many techniques to suppress the multi-user interference, among which the feedback scheme is the one which is gaining a lot of attention. In feedback schemes, CSI information needs to be fed back to the base station from UEs in the uplink. It is obvious, the question arises on the type and amount of feedback need to be used. Research has been progressing in this front and some feedback techniques have been proposed. Three basic CoMP Feedback schemes are available. Explicit or statistical channel information feedback scheme in which channel information like channels's covariance matrix of the channel are shared between the transmitter and receiver. Next, implicit or statistical channel information feedback which contains information such as Channel quality indication or Precoding matrix indicator or Rank indicator. 1st applied to TDD LTE type structure and 2nd of feedback scheme can be applied in the FDD system. Finally, we have UE which tranmit the sounding reference signal (CSI). This type of feedback scheme is applied to exploit channel reciprocity and to reduce channel intercell interference and this can be applied in the TDD system. We have analyzed the scenario of LTE TDD based system. After this, optimization of power is also required because users at the cell edge required more attention than the user locating at the center of the cell. In my work, it shows estimated power gives exponential divercity for high SNR as low SNR too. In this method, a compression feedback method is analyzed to provide multi-cell spatial channel information. It improves the feedback e�ciency and throughput. The rows and columns of the channel matrix are compressed using Eigenmode of the user and codebook based scheme speci�ed in LTE speci�cation. The main drawback of this scheme is that spectral e�ciency is achieved with the cost of increased overheads for feedback and evolved NodeB (eNB). Other factor is complexity of eNodeB which is to be addressed in future work

Novel feedback and signalling mechanisms for interference management and efficient modulation

In order to meet the ever-growing demand for mobile data, a number of different technologies have been adopted by the fourth generation standardization bodies. These include multiple access schemes such as spatial division multiple access (SDMA), and efficient modulation techniques such as orthogonal frequency division multiplexing (OFDM)-based modulation. The specific objectives of this theses are to develop an effective feedback method for interference management in smart antenna SDMA systems and to design an efficient OFDM-based modulation technique, where an additional dimension is added to the conventional two-dimensional modulation techniques such as quadrature amplitude modulation (QAM). In SDMA time division duplex (TDD) systems, where channel reciprocity is maintained, uplink (UL) channel sounding method is considered as one of the most promising feedback methods due to its bandwidth and delay efficiency. Conventional channel sounding (CCS) only conveys the channel state information (CSI) of each active user to the base station (BS). Due to the limitation in system performance because of co-channel interference (CCI) from adjacent cells in interference-limited scenarios, CSI is only a suboptimal metric for multiuser spatial multiplexing optimization. The first major contribution of this theses is a novel interference feedback method proposed to provide the BS with implicit knowledge about the interference level received by each mobile station (MS). More specifically, it is proposed to weight the conventional channel sounding pilots by the level of the experienced interference at the user’s side. Interference-weighted channel sounding (IWCS) acts as a spectrally efficient feedback technique that provides the BS with implicit knowledge about CCI experienced by each MS, and significantly improves the downlink (DL) sum capacity for both greedy and fair scheduling policies. For the sake of completeness, a novel procedure is developed to make the IWCS pilots usable for UL optimization. It is proposed to divide the optimization metric obtained from the IWCS pilots by the interference experienced at the BS’s antennas. The resultant new metric, the channel gain divided by the multiplication of DL and UL interference, provides link-protection awareness and is used to optimize both UL and DL. Using maximum capacity scheduling criterion, the link-protection aware metric results in a gain in the median system sum capacity of 26.7% and 12.5% in DL and UL respectively compared to the case when conventional channel sounding techniques are used. Moreover, heuristic algorithm has been proposed in order to facilitate a practical optimization and to reduce the computational complexity. The second major contribution of this theses is an innovative transmission approach, referred to as subcarrier-index modulation (SIM), which is proposed to be integrated with OFDM. The key idea of SIM is to employ the subcarrier-index to convey information to the receiver. Furthermore, a closed-form analytical bit error ratio (BER) of SIM OFDM in Rayleigh channel is derived. Simulation results show BER performance gain of 4 dB over 4-QAM OFDM for both coded and uncoded data without power saving policy. Alternatively, power saving policy maintains an average gain of 1 dB while only using half OFDM symbol transmit power