24,108 research outputs found

    Role of computational fluid dynamics in unsteady aerodynamics for aeroelasticity

    Get PDF
    In the last two decades there have been extensive developments in computational unsteady transonic aerodynamics. Such developments are essential since the transonic regime plays an important role in the design of modern aircraft. Therefore, there has been a large effort to develop computational tools with which to accurately perform flutter analysis at transonic speeds. In the area of Computational Fluid Dynamics (CFD), unsteady transonic aerodynamics are characterized by the feature of modeling the motion of shock waves over aerodynamic bodies, such as wings. This modeling requires the solution of nonlinear partial differential equations. Most advanced codes such as XTRAN3S use the transonic small perturbation equation. Currently, XTRAN3S is being used for generic research in unsteady aerodynamics and aeroelasticity of almost full aircraft configurations. Use of Euler/Navier Stokes equations for simple typical sections has just begun. A brief history of the development of CFD for aeroelastic applications is summarized. The development of unsteady transonic aerodynamics and aeroelasticity are also summarized

    Some applications of the quasi vortex-lattice method in steady and unsteady aerodynamics

    Get PDF
    The quasi vortex-lattice method is reviewed and applied to the evaluation of backwash, with applications to ground effect analysis. It is also extended to unsteady aerodynamics, with particular interest in the calculation of unsteady leading-edge suction. Some applications in ornithopter aerodynamics are given

    Investigation of oscillating cascade aerodynamics by an experimental influence coefficient technique

    Get PDF
    Fundamental experiments are performed in the NASA Lewis Transonic Oscillating Cascade Facility to investigate the torsion mode unsteady aerodynamics of a biconvex airfoil cascade at realistic values of the reduced frequency for all interblade phase angles at a specified mean flow condition. In particular, an unsteady aerodynamic influence coefficient technique is developed and utilized in which only one airfoil in the cascade is oscillated at a time and the resulting airfoil surface unsteady pressure distribution measured on one dynamically instrumented airfoil. The unsteady aerodynamics of an equivalent cascade with all airfoils oscillating at a specified interblade phase angle are then determined through a vector summation of these data. These influence coefficient determined oscillation cascade data are correlated with data obtained in this cascade with all airfoils oscillating at several interblade phase angle values. The influence coefficients are then utilized to determine the unsteady aerodynamics of the cascade for all interblade phase angles, with these unique data subsequently correlated with predictions from a linearized unsteady cascade model

    Aeroelastic modeling for the FIT (Functional Integration Technology) team F/A-18 simulation

    Get PDF
    As part of Langley Research Center's commitment to developing multidisciplinary integration methods to improve aerospace systems, the Functional Integration Technology (FIT) team was established to perform dynamics integration research using an existing aircraft configuration, the F/A-18. An essential part of this effort has been the development of a comprehensive simulation modeling capability that includes structural, control, and propulsion dynamics as well as steady and unsteady aerodynamics. The structural and unsteady aerodynamics contributions come from an aeroelastic mode. Some details of the aeroelastic modeling done for the Functional Integration Technology (FIT) team research are presented. Particular attention is given to work done in the area of correction factors to unsteady aerodynamics data

    Compressible unsteady potential aerodynamic flow around lifting bodies having arbitrary shapes and motions

    Get PDF
    The program SUSSA ACTS, steady and unsteady subsonic and supersonic aerodynamics for aerospace complex transportation system, is presented. Fully unsteady aerodynamics is discussed first, followed by developments on normal wash, pressure distribution, generalized forces, supersonic formulation, numerical results, geometry preprocessor, the user manual, control surfaces, and first order formulation. The ILSWAR program was also discussed

    Developments in steady and unsteady aerodynamics for use in aeroelastic analysis and design

    Get PDF
    A review is given of seven research projects which are aimed at improving the generality, accuracy, and computational efficiency of steady and unsteady aerodynamic theory for use in aeroelastic analysis and design. These projects indicate three major thrusts of current research efforts: (1) more realistic representation of steady and unsteady subsonic and supersonic loads on aircraft configurations of general shape with emphasis on structural-design applications, (2) unsteady aerodynamics for application in active-controls analyses, and (3) unsteady aerodynamics for the frequently critical transonic speed range. The review of each project includes theoretical background, description of capabilities, results of application, current status, and plans for further development and use

    Report of the panel on dynamics and aeroelasticity

    Get PDF
    Model scaling for flutter analysis is reviewed. Characteristics of the Langley Transonic Dynamics Tunnel (TDT) are described and several features are recommended for inclusion in the National Transonic Facility. Problem areas suggested for the NTF include: Reynolds number effects on control surface unsteady aerodynamics; effects of Reynolds number on buffet onset and loads; transonic unsteady aerodynamics; and Reynolds number effects on flutter characteristics of wing planforms and airfoils

    SUSSA ACTS: A computer program for steady and unsteady, subsonic and supersonic aerodynamics for aerospace complex transportation systems

    Get PDF
    The computer program SUSSA ACTS (Steady and Unsteady, Subsonic and Supersonic Aerodynamics for Complex Transportation Systems) are presented in the final version. The numerical formulation and the description of the program and numerical results are included. In particular, generalized forces for fully unsteady (complex frequency) aerodynamics for a wing-body configuration, in both subsonic and supersonic flows, are discussed. The mathematical analysis includes completely arbitrary motion. The numerical implementation was limited to steady and oscillatory flows. A more general aerodynamic formulation in the form of a fully transient response for time-domain analysis and the aerodynamic transfer function (Laplace transform of the fully unsteady operator) for frequency-domain analysis is outlined

    Unsteady aerodynamic analysis of space shuttle vehicles. Part 1: Summary report

    Get PDF
    An analysis of the unsteady aerodynamics of space shuttle vehicles was performed. The results show that slender wing theory can be modified to give the potential flow static and dynamic characteristics over a large Mach number range from M = 0 to M 1. A semi-empirical analytic approximation is derived for the loads induced by the leading edge vortex; and it is shown that the developed analytic technique gives good prediction of experimentally determined steady and unsteady delta wing aerodynamics, including the effects of leading edge roundness. At supersonic speeds, attached leading edge flow is established and shock-induced flow separation effects become of concern. Analysis of experimental results for a variety of boost configurations led to a definition of the main features of the flow interference effects between orbiter (delta wing) and booster. The effects of control deflection on the unsteady aerodynamics of the delta-wing orbiter were also evaluated
    • …