Disturbance Suppression in PMSM Drives Physical Investigation, Algorithm Design and Implementation

The work of this Ph.D. focuses on the investigation of advanced control algorithms for the control of constant and periodic disturbances in Permanent Magnet Synchronous Machines (PMSMs), with the discussion of different methods for improving their negative influence on the machine current and the torque produced at the shaft. The discussion of the disturbances from a control perspective starts with the study of the parameter uncertainties effect on the dynamical performances of the current control and after the detailed analysis in the frequency domain, simple methods for improving the state-of-art decoupling network are given and validated on the testbench. Thanks to the feature of the introduced estimator, the transient behavior of the proposed strategy results in a consistent fast and precise performance. The control scheme allows to avoid the implementation of anti-windup mechanisms in the current control, making the overall controller less sensitive to parameter mismatch. Further, due to the low computational burden, the algorithm is suitable for low cost hardware. Subsequently, the more complex issue of periodic disturbances has been deeply investigated. The theoretical model proposed is validated by comparing the real measured torque with an estimation based on the recovered disturbance affecting the observed voltages and currents. The results are clearly acceptable and further, the experimental validation stresses out the fact that few terms have a predominant role in producing the harmonic disturbances, compared to the others. This consideration lets develop two strategies for suppressing the different harmonic orders present in the machine torque at low-speed operation. One strategy relies on on-line adaptive policies, where the estimated information is passed through a sequence of optimization algorithms with different objectives. In this context, hints on the guaranteed stability are also provided in order to confirm the practical feasibility of the algorithm. The other strategy is based on the off-line generation of some pre-determined functions, limiting the on-line burden to the computation of look-up tables. Both methods brought satisfactory results during the experimental validation, confirming the validity of our approximations made on the original complex model. Although the hardware testbed setup limited the opportunity to validate the methodologies at low speed, this represents a realistic scenario, in fact at higher speed the artificial injection of harmonics within the machine current becomes challenging due to the high electrical rotational speed and it brings more negative effects, in terms of losses and audible noise than benefits on the shaft stress, in fact, the machine inertia acts as a natural filter for the high frequencies harmonics. In summary, it can be said that the research work on advanced control algorithms for the disturbance suppression in PMSM drives has produced affordable and reliable methodologies, which can be of practical implementation for various industrial drives

A Review of Resonant Converter Control Techniques and The Performances

paper first discusses each control technique and then gives experimental results and/or performance to highlights their merits. The resonant converter used as a case study is not specified to just single topology instead it used few topologies such as series-parallel resonant converter (SPRC), LCC resonant converter and parallel resonant converter (PRC). On the other hand, the control techniques presented in this paper are self-sustained phase shift modulation (SSPSM) control, self-oscillating power factor control, magnetic control and the H-∞ robust control technique

State-Feedback Controller Based on Pole Placement Technique for Inverted Pendulum System

This paper presents a state space control technique for inverted pendulum system using simulation and real experiment via MATLAB/SIMULINK software. The inverted pendulum is difficult system to control in the field of control engineering. It is also one of the most important classical control system problems because of its nonlinear characteristics and unstable system. It has three main problems that always appear in control application which are nonlinear system, unstable and non-minimumbehavior phase system. This project will apply state feedback controller based on pole placement technique which is capable in stabilizing the practical based inverted pendulum at vertical position. Desired design specifications which are 4 seconds settling time and 5 % overshoot is needed to apply in full state feedback controller based on pole placement technique. First of all, the mathematical model of an inverted pendulum system is derived to obtain the state space representation of the system. Then, the design phase of the State-Feedback Controller can be conducted after linearization technique is performed to the nonlinear equation with the aid of mathematical aided software such as Mathcad. After that, the design is simulated using MATLAB/Simulink software. The controller design of the inverted pendulum system is verified using simulation and experiment test. Finally the controller design is compared with PID controller for benchmarking purpose

A SIMULATION STUDY OF STATE-FEEDBACK CONTROL METHOD FOR ELECTRO HYDRAULIC SERVO MODEL

Electro hydraulic servo system is used by many industries due to its ability to impart large forces. It also has advantage in term of fast response and robustness. The electro hydraulic system suffered from errors of the transient response which are steady state error, settling time and the ripples. It is crucial to design a controller for the system to ensure the reliability of the system. Aiming at the characteristic of the system, steady state feedback control method is designed to compensate the error. The analysis of the system is done based on the transient response specifically on the actuator part. MATLAB Simulink is used as the simulation software to evaluate the force performance of state feedback controller method. The steady state error, settling time and ripple are observed and recorded for each controller. Three methods is applied, which are full feedback, state feedback with feed forward and integral control are compared with proportional, integral and derivatives (PID) controller. The result of each controller shows the differences performance. Based on the simulation results, the feedforward technique is found to be the best control technique for the electro hydraulic servo system due to the requirement performance such as percent overshoot, settling time, rise time and zero steady state error. This good result will directly benefit industries that use electro hydraulic system as their actuator for production machines