A Method to Support Diagnostics of Dynamic Faults in Networks of Interconnections

The article is devoted to the method facilitating the diagnostics of dynamic faults in networks of interconnection in systems-on-chips. It shows how to reconstruct the erroneous test response sequence coming from the faulty connection based on the set of signatures obtained as a result of multiple compaction of this sequence in the MISR register with programmable feedback. The Chinese reminder theorem is used for this purpose. The article analyzes in detail the various hardware realizations of the discussed method. The testing time associated with each proposed solution was also estimated. Presented method can be used with any type of test sequence and test pattern generator. It is also easily scalable to any number of nets in the network of interconnections. Moreover, it supports finding a trade-off between area overhead and testing time

An efficient logic fault diagnosis framework based on effect-cause approach

Fault diagnosis plays an important role in improving the circuit design process and the manufacturing yield. With the increasing number of gates in modern circuits, determining the source of failure in a defective circuit is becoming more and more challenging. In this research, we present an efficient effect-cause diagnosis framework for combinational VLSI circuits. The framework consists of three stages to obtain an accurate and reasonably precise diagnosis. First, an improved critical path tracing algorithm is proposed to identify an initial suspect list by backtracing from faulty primary outputs toward primary inputs. Compared to the traditional critical path tracing approach, our algorithm is faster and exact. Second, a novel probabilistic ranking model is applied to rank the suspects so that the most suspicious one will be ranked at or near the top. Several fast filtering methods are used to prune unrelated suspects. Finally, to refine the diagnosis, fault simulation is performed on the top suspect nets using several common fault models. The difference between the observed faulty behavior and the simulated behavior is used to rank each suspect. Experimental results on ISCAS85 benchmark circuits show that this diagnosis approach is efficient both in terms of memory space and CPU time and the diagnosis results are accurate and reasonably precise

A Comprehensive Test Pattern Generation Approach Exploiting SAT Attack for Logic Locking

The need for reducing manufacturing defect escape in today's safety-critical applications requires increased fault coverage. However, generating a test set using commercial automatic test pattern generation (ATPG) tools that lead to zero-defect escape is still an open problem. It is challenging to detect all stuck-at faults to reach 100% fault coverage. In parallel, the hardware security community has been actively involved in developing solutions for logic locking to prevent IP piracy. Locks (e.g., XOR gates) are inserted in different locations of the netlist so that an adversary cannot determine the secret key. Unfortunately, the Boolean satisfiability (SAT) based attack, introduced in [1], can break different logic locking schemes in minutes. In this paper, we propose a novel test pattern generation approach using the powerful SAT attack on logic locking. A stuck-at fault is modeled as a locked gate with a secret key. Our modeling of stuck-at faults preserves the property of fault activation and propagation. We show that the input pattern that determines the key is a test for the stuck-at fault. We propose two different approaches for test pattern generation. First, a single stuck-at fault is targeted, and a corresponding locked circuit with one key bit is created. This approach generates one test pattern per fault. Second, we consider a group of faults and convert the circuit to its locked version with multiple key bits. The inputs obtained from the SAT tool are the test set for detecting this group of faults. Our approach is able to find test patterns for hard-to-detect faults that were previously failed in commercial ATPG tools. The proposed test pattern generation approach can efficiently detect redundant faults present in a circuit. We demonstrate the effectiveness of the approach on ITC'99 benchmarks. The results show that we can achieve a perfect fault coverage reaching 100%.Comment: 12 pages, 7 figures, 5 table

Optimal Unknown Bit Filtering for Test Response Masking

[[abstract]]In this paper presents a new X-Masking scheme for response compaction. It filters all X states from test response that can no unknown value input to response compactor. In the experimental results, this scheme increased less control data and maintain same observability.[[conferencedate]]20121104~20121107[[iscallforpapers]]Y[[conferencelocation]]New Taipei, Taiwa

Constraint solving over multi-valued logics - application to digital circuits

Due to usage conditions, hazardous environments or intentional causes, physical and virtual systems are subject to faults in their components, which may affect their overall behaviour. In a ‘black-box’ agent modelled by a set of propositional logic rules, in which just a subset of components is externally visible, such faults may only be recognised by examining some output function of the agent. A (fault-free) model of the agent’s system provides the expected output given some input. If the real output differs from that predicted output, then the system is faulty. However, some faults may only become apparent in the system output when appropriate inputs are given. A number of problems regarding both testing and diagnosis thus arise, such as testing a fault, testing the whole system, finding possible faults and differentiating them to locate the correct one. The corresponding optimisation problems of finding solutions that require minimum resources are also very relevant in industry, as is minimal diagnosis. In this dissertation we use a well established set of benchmark circuits to address such diagnostic related problems and propose and develop models with different logics that we formalise and generalise as much as possible. We also prove that all techniques generalise to agents and to multiple faults. The developed multi-valued logics extend the usual Boolean logic (suitable for faultfree models) by encoding values with some dependency (usually on faults). Such logics thus allow modelling an arbitrary number of diagnostic theories. Each problem is subsequently solved with CLP solvers that we implement and discuss, together with a new efficient search technique that we present. We compare our results with other approaches such as SAT (that require substantial duplication of circuits), showing the effectiveness of constraints over multi-valued logics, and also the adequacy of a general set constraint solver (with special inferences over set functions such as cardinality) on other problems. In addition, for an optimisation problem, we integrate local search with a constructive approach (branch-and-bound) using a variety of logics to improve an existing efficient tool based on SAT and ILP

Built-In Test Sequence Generation for Synchronous Sequential Circuits Based on Loading and Expansion of Test Subsequences

We describe an on-chip test generation scheme for synchronous sequential circuits that allows at-speed testing of such circuits. The proposed scheme is based on loading of (short) input sequences into an on-chip memory, and expansion of these sequences on-chip into test sequences. Complete coverage of modeled faults is achieved by basing the selection of the loaded sequences on a deterministic test sequence T 0, and ensuring that every fault detected by T 0 is detected by the expanded version of at least one loaded sequence. Experimental results presented for benchmark circuits show that the length of the sequence that needs to be stored at any time is on the average 10 % of the length of T 0, and that the total length of all the loaded sequences is on the average 46 % of the length of T 0. 1

Design of On-Chip Self-Testing Signature Register

Over the last few years, scan test has turn out to be too expensive to implement for industry standard designs due to increasing test data volume and test time. The test cost of a chip is mainly governed by the resource utilization of Automatic Test Equipment (ATE). Also, it directly depends upon test time that includes time required to load test program, to apply test vectors and to analyze generated test response of the chip. An issue of test time and data volume is increasingly appealing designers to use on-chip test data compactors, either on input side or output side or both. Such techniques significantly address the former issues but have little hold over increasing number of input-outputs under test mode. Further, test pins on DUT are increasing over the generations. Thus, scan channels on test floor are falling short in number for placement of such ICs. To address issues discussed above, we introduce an on-chip self-testing signature register. It comprises a response compactor and a comparator. The compactor compacts large chunk of response data to a small test signature whereas the comparator compares this test signature with desired one. The overall test result for the design is generated on single output pin. Being no storage of test response is demanded, the considerable reduction in ATE memory can be observed. Also, with only single pin to be monitored for test result, the number of tester channels and compare edges on ATE side significantly reduce at the end of the test. This cuts down maintenance and usage cost of test floor and increases its life time. Furthermore reduction in test pins gives scope for DFT engineers to increase number of scan chains so as to further reduce test time

REDUCING POWER DURING MANUFACTURING TEST USING DIFFERENT ARCHITECTURES

Power during manufacturing test can be several times higher than power consumption in functional mode. Excessive power during test can cause IR drop, over-heating, and early aging of the chips. In this dissertation, three different architectures have been introduced to reduce test power in general cases as well as in certain scenarios, including field test. In the first architecture, scan chains are divided into several segments. Every segment needs a control bit to enable capture in a segment when new faults are detectable on that segment for that pattern. Otherwise, the segment should be disabled to reduce capture power. We group the control bits together into one or more control chains. To address the extra pin(s) required to shift data into the control chain(s) and significant post processing in the first architecture, we explored a second architecture. The second architecture stitches the control bits into the chains they control as EECBs (embedded enable capture bits) in between the segments. This allows an ATPG software tool to automatically generate the appropriate EECB values for each pattern to maintain the fault coverage. This also works in the presence of an on-chip decompressor. The last architecture focuses primarily on the self-test of a device in a 3D stacked IC when an existing FPGA in the stack can be programmed as a tester. We show that the energy expended during test is significantly less than would be required using low power patterns fed by an on-chip decompressor for the same very short scan chains

Secure Split Test for Preventing IC Piracy by Un-Trusted Foundry and Assembly

In the era of globalization, integrated circuit design and manufacturing is spread across different continents. This has posed several hardware intrinsic security issues. The issues are related to overproduction of chips without knowledge of designer or OEM, insertion of hardware Trojans at design and fabrication phase, faulty chips getting into markets from test centers, etc. In this thesis work, we have addressed the problem of counterfeit IC‟s getting into the market through test centers. The problem of counterfeit IC has different dimensions. Each problem related to counterfeiting has different solutions. Overbuilding of chips at overseas foundry can be addressed using passive or active metering. The solution to avoid faulty chips getting into open markets from overseas test centers is secure split test (SST). The further improvement to SST is also proposed by other researchers and is known as Connecticut Secure Split Test (CSST). In this work, we focus on improvements to CSST techniques in terms of security, test time and area. In this direction, we have designed all the required sub-blocks required for CSST architecture, namely, RSA, TRNG, Scrambler block, study of benchmark circuits like S38417, adding scan chains to benchmarks is done. Further, as a security measure, we add, XOR gate at the output of the scan chains to obfuscate the signal coming out of the scan chains. Further, we have improved the security of the design by using the PUF circuit instead of TRNG and avoid the use of the memory circuits. This use of PUF not only eliminates the use of memory circuits, but also it provides the way for functional testing also. We have carried out the hamming distance analysis for introduced security measure and results show that security design is reasonably good.Further, as a future work we can focus on: • Developing the circuit which is secuered for the whole semiconductor supply chain with reasonable hamming distance and less area overhead