GET: A generic electronics system for TPCs and nuclear physics instrumentation

General Electronics for TPCs (GET) is a generic, reconfigurable and comprehensive electronics and data-acquisition system for nuclear physics instrumentation of up to 33792 channels. The system consists of a custom-designed ASIC for signal processing, front-end cards that each house 4 ASIC chips and digitize the data in parallel through 12-bit ADCs, concentration boards to read and process the digital data from up to 16 ASICs, a 3-level trigger and master clock module to trigger the system and synchronize the data, as well as all of the associated firmware, communication and data-acquisition software. An overview of the system including its specifications and measured performances are presented

Technical Design Report for the PANDA Micro Vertex Detector

This document illustrates the technical layout and the expected performance of the Micro Vertex Detector (MVD) of the PANDA experiment. The MVD will detect charged particles as close as possible to the interaction zone. Design criteria and the optimisation process as well as the technical solutions chosen are discussed and the results of this process are subjected to extensive Monte Carlo physics studies. The route towards realisation of the detector is outlined

Technical Design Report for the: PANDA Micro Vertex Detector

This document illustrates the technical layout and the expected performance of the Micro Vertex Detector (MVD) of the PANDA experiment. The MVD will detect charged particles as close as possible to the interaction zone. Design criteria and the optimisation process as well as the technical solutions chosen are discussed and the results of this process are subjected to extensive Monte Carlo physics studies. The route towards realisation of the detector is outlined.Comment: 189 pages, 225 figures, 41 table

Timing Signals and Radio Frequency Distribution Using Ethernet Networks for High Energy Physics Applications

Timing networks are used around the world in various applications from telecommunications systems to industrial processes, and from radio astronomy to high energy physics. Most timing networks are implemented using proprietary technologies at high operation and maintenance costs. This thesis presents a novel timing network capable of distributed timing with subnanosecond accuracy. The network, developed at CERN and codenamed “White- Rabbit”, uses a non-dedicated Ethernet link to distribute timing and data packets without infringing the sub-nanosecond timing accuracy required for high energy physics applications. The first part of this thesis proposes a new digital circuit capable of measuring time differences between two digital clock signals with sub-picosecond time resolution. The proposed digital circuit measures and compensates for the phase variations between the transmitted and received network clocks required to achieve the sub-nanosecond timing accuracy. Circuit design, implementation and performance verification are reported. The second part of this thesis investigates and proposes a new method to distribute radio frequency (RF) signals over Ethernet networks. The main goal of existing distributed RF schemes, such as Radio-Over-Fibre or Digitised Radio-Over-Fibre, is to increase the bandwidth capacity taking advantage of the higher performance of digital optical links. These schemes tend to employ dedicated and costly technologies, deemed unnecessary for applications with lower bandwidth requirements. This work proposes the distribution of RF signals over the “White-Rabbit” network, to convey phase and frequency information from a reference base node to a large numbers of remote nodes, thus achieving high performance and cost reduction of the timing network. Hence, this thesis reports the design and implementation of a new distributed RF system architecture; analysed and tested using a purpose-built simulation environment, with results used to optimise a new bespoke FPGA implementation. The performance is evaluated through phase-noise spectra, the Allan-Variance, and signalto- noise ratio measurements of the distributed signals

Timing Architecture for ESS

Programa Oficial de Doutoramento en Investigación en Tecnoloxías da Información. 5023V01[Resumo] O sistema de temporización é unha compoñente fundamental para o control e sincronización de instalacións industriais e científicas, coma aceleradores de partículas. Nesta tese traballamos na especificación e desenvolvemento do sistema de temporización para a European Spallation Source (ESS), a maior fonte de neutróns actualmente en construción. Abordamos este tra­ ballo a dous niveis: a especificación do sistema de temporización, e a imple­ mentación física de sistemas de control empregando circuítos reconfigurables. Con respecto á especificación do sistema de temporización, deseñamos e implementamos a configuración do protocolo de temporización para cumprir cos requirimentos do ESS e ideamos un modo de operación e unha aplicación para a configuración e control do sistema de temporización. Tamén presentamos unha ferramenta e unha metodoloxía para imple­ mentar sistemas de control empregando FPGAs, coma os nodos do sistema de temporización. ámbalas <lúas están baseadas en statecharts, unha repre­ sentación gráfica de sistemas que expande o concepto de máquinas de estados finitos, orientada a sistemas que necesitan ser reconfigurados rápidamente en múltiples localizacións minimizando a posibilidade de erros. A ferramenta crea automaticamente código VHDL sintetizable a partir do statechart do sistema. A metodoloxía explica o procedemento para implementar o state­ chart como unha arquitectura microprogramada en FPGAs.[Resumen] El sistema de temporización es un componente fundamental para el control y sincronización de instalaciones industriales y científicas, como aceleradores e partículas. En esta tesis trabajamos en la especificación y desarrollo el sistema de temporización para la European Spallation Source (ESS), la mayor fuente de neutrones actualmente en construcción. Abordamos este trabajo en dos niveles: la especificación del sistema de temporización, y la mplementación física de sistemas de control empleando circuitos reconfig­ rables. Con respecto a la especificación del sistema de temporización, diseñamos e implementamos la configuración del protocolo de temporización para cumplir on los requisitos de ESS e ideamos un modo de operación y una aplicación ara la configuración y control del sistema de temporización. También presentamos una herramienta y una metodología para imple­ entar sistemas de control empleando FPGAs, como los nodos del sistema e temporización. Ambas están basadas en statecharts) una representación gráfica de sistemas que expande el concepto de máquinas de estados fini­ os, orientada a sistemas que necesitan ser reconfigurados rápidamente en últiples localizaciones minimizando la posibilidad de errores. La her­ramienta crea automáticamente código VHDL sintetizable a partir del state­chart del sistema. La metodología explica el procedimiento para implemen­tar el statechart como una arquitectura microprogramada en FPGAs.[Abstract] The timing system is a key component for the control and synchronization of industrial and scientific facilities, such as particle accelerators. In this thesis we tackle the specification and development of the timing system for the European Spallation Source (ESS), the largest neutron source currently in construction. We approach this work at two levels: the specification of the timing system and the physical implementation of control systems using reconfigurable hardware. Regarding the specification of the timing system, we designed and imple­ mented the configuration of the timing protocol to fulfil the requirements of ESS and devised an operation mode andan application for the configuration and control of the timing system. We also present one too! and one methodology to implement control systems using FPGAs, such as the nodes of the timing system. Both are based on statecharts, a graphical representation of systems that expand the concepts of Finite State Machines, targeted at systems that need to be re­ configured quickly in multiple locations minimizing the chance of errors. The too! automatically creates synthesizable VHDL code from a statechart of the system. The methodology explains the procedure to implement the statechart as a microprogrammed architecture in FPGAs

RECENT RESEARCH IN VLSI, MEMS AND POWER DEVICES WITH PRACTICAL APPLICATION TO THE ITER AND DREAM PROJECTS

Several MEMS (Micro Electro-Mechanical Systems) devices have been analysed and simulated. The new proposed model of SiC MPS (Merged PIN-Schottky) diodes is in full agreement with the real MPS devices. The real size DLL (Dynamic Lattice Liquid) simulator as well as the research on modelling and simulation of modern VLSI devices with practical applications have been presented. In the basis of experience in the field of ATCA (Advanced Telecommunications Computing Architecture) based systems a proof-of-concept DAQ (data acquisition) system for ITER (International Thermonuclear Experimental Reactor) have been proposed